A Gatewood company - serving North Las Vegas, NV
Gate Parts & Welding in Enterprise, NV | Gatewood Fence & Gate North Las Vegas - Gatewood Fence & Gate North Las Vegas

Gate Parts & Welding in Enterprise - Made to Measure, Written Price

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Enterprise

If your gate is dragging, sagging, or tripping its operator, we can help. We handle Gate Parts & Welding across Enterprise, NV, with on-site welding and a repair-first approach so your gate stays in your driveway instead of getting hauled off. Call (844) 761-9351 and a live person picks up, day or night.

Call (844) 761-9351

We know the 89139 corridor south of the 215 well. That matters because Enterprise gates are a different animal than gates in older parts of the valley, and the fix usually starts somewhere most people don’t expect.

Why Gatewood Fence & Gate North Las Vegas Is Enterprise’s Preferred Gate Parts & Welding Company

Enterprise is master-planned HOA suburbia, and we get that. Almost every gate in the 89139 tract communities has to match a tract-wide design standard, so a repair here is as much about staying inside the acceptable iron, vinyl, or aluminum palette as it is about the mechanism. Somebody who doesn’t understand architectural review will fix your gate and leave you holding an HOA compliance letter. We don’t work that way.

We repair what other companies want to replace. Our technicians have up to 25 years of experience, and every job carries the 90-Day Done Right Promise stamped in writing. If it’s not done right, we make it right with one call, no runaround. Calls get answered by a live person around the clock, not a voicemail or a queue three states away.

We also know the specific failure pattern in Enterprise. The 1990s to 2010s tract homes here were built with manual gates that homeowners later automated, but the original posts and footings were never sized for an operator. So most swing gate failures in Enterprise start at the hinge post, not the motor. That single fact saves people from replacing a perfectly good motor that was never the problem. The name is on the shop and the shop is down the road, which is the oldest accountability there is.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Enterprise

When your gate fails, here’s how we go at it. Not every Enterprise job needs all of this, but these are the four we run into most.

Hinge Replacement

A gate sags in the hinge post, not in the middle, and that’s where we start. In Enterprise, the builder-grade hinges on those 15- to 30-year-old tract gates are hitting end of life at scale. We cut off the tired hardware, weld on heavy-duty replacements, and correct the sag before we touch anything else. Fix the panel without the post and you’ll fix it twice.

Hinge Replacement

Post Replacement

This is the big one in Enterprise. When a retrofitted LiftMaster or Linear operator torques a hinge post that was set shallow in desert soil and never designed for that load, the footing gives up. We dig out the old footing, pour a deeper post, and re-hang the gate so the whole assembly carries the load it was never built to carry. On-site welding means it all happens in your driveway, matched to your original builder’s style.

Post Replacement

Rail Repair

Mojave heat and UV fade powder coat and warp vinyl, and monsoon dust storms jam tracks and stress rails. We straighten bent rails, repair weld seams that cracked, and get slide gates tracking true again. We match the finish to what’s already there so the repair doesn’t stand out to your neighbors or the ARC.

Rail Repair

Custom Welding

Sometimes a part doesn’t exist anymore, or it does but nothing off the shelf fits your gate. That’s where on-site welding earns its keep. We fabricate the bracket, patch, or mount you need on the spot, including operator mounts and reinforcement plates for retrofitted automation. Your gate never leaves the property.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 761-9351

Trusted Brands We Service in Enterprise

We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, and Linear. We don’t claim to stock parts locally. Instead, we diagnose what failed and source the right hardware fast, so you’re not waiting weeks on a truck from out of state. Most Enterprise repairs come together quickly once we know whether the problem is the post, the operator, or the sensor, and we tell you which one it is before any work begins. We quote the price and agree on it with you first, every time.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Parts & Welding Problems We See in Enterprise Homes

  • Undersized hinge posts on automated gates. The builder put in a manual gate, a later owner added an operator, and the post was never sized for the torque. Sagging swing gates in Enterprise usually trace right back to that footing.
  • After-the-fact power and conduit runs. Enterprise homes didn’t come with conduit for a gate operator. When it gets added later, you get voltage drop or exposed wiring that trips the operator and leaves you guessing.
  • UV-baked photo-eyes and lubricants. The 105°F summers here cook the safety sensors and lubricants on LiftMaster and Linear operators, causing intermittent safety reverses and jamming in the heat.
  • Shared property lines and HOA standards. In Enterprise’s tract communities, one sagging gate is a neighbor dispute and an HOA compliance letter waiting to happen. Matching the original builder’s iron, vinyl, or aluminum style and color exactly is part of the job, not an afterthought.

Pricing for Gate Parts & Welding in Enterprise, NV

We give you upfront pricing and agree on it before any work starts, so there’s no invoice surprise at the door. Here’s what Enterprise jobs typically run:

Job Typical Enterprise Range
Hinge replacement (per hinge, welded) $145 – $310
Post replacement with new footing $420 – $850
Rail repair or re-weld $180 – $390
Custom welding / fabricated bracket or mount $210 – $560
Roller or track hardware swap $90 – $220

Deep footings, matched-style fabrication for HOA sign-off, and re-mounting an operator push a job toward the top of these ranges. Standing offers include $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (844) 761-9351 for a free estimate.

We Also Serve Cities Near Enterprise

We take care of gates throughout the valley, not just Enterprise. If you’re in Spring Valley, Paradise, Winchester, or Henderson, you get the same on-site welding and 90-Day Done Right Promise. Same live person on the phone, same upfront pricing. Call and let’s talk about what your gate is doing.

Serving Enterprise, NV – Our Local Coverage Area

We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Enterprise

Why Enterprise Chooses Gatewood Fence & Gate North Las Vegas

We set the standard for gate parts & welding in Enterprise.

30-60 Min Response

Fast dispatch across Enterprise. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Enterprise

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Enterprise - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 60 minutes.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Enterprise Customers Say

Trusted by homeowners across Enterprise and surrounding areas.

★★★★★

"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."

Lucinda Marchbanks
★★★★★

"He builds the gates himself. That is not something you can say about the outfits that just order a panel in."

Doreen Whitfield
★★★★★

"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."

Otis Redmond

Ready for Gate Parts & Welding in Enterprise?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Enterprise.

(844) 761-9351

Request a Free Estimate in Enterprise

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - 24/7 Dispatch