A Gatewood company - serving North Las Vegas, NV
Gate Parts & Welding in North Las Vegas, NV | Gatewood Fence & Gate North Las Vegas - Gatewood Fence & Gate North Las Vegas

Gate Parts & Welding in North Las Vegas - Made to Measure, Written Price

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Trusted Gate Parts & Welding for North Las Vegas Homeowners

If your driveway gate has started dragging, listing to one side, or popping loose at the hinge, the fix is almost always structural, not cosmetic. That sag is coming from the hinge post or the weld holding the frame together, and welding it in place is what keeps the gate where it belongs. Our technicians have up to 25 years of experience diagnosing exactly that kind of wear. We answer every call with a live person around the clock, and we offer same-day repairs across North Las Vegas when the schedule allows. Call (844) 761-9351 and we’ll tell you straight what’s wrong and what it takes to fix it.

Call (844) 761-9351

What Our Gate Parts & Welding Service Includes

This isn’t a parts-swap operation. We look at what actually failed, repair the metal or the hardware that gave out, and weld on site so your gate never leaves the driveway. Here’s what the work covers.

Hinge Replacement

Hinges carry the full weight of the gate and take the beating every time it opens and closes. When a hinge wears flat or the barrel snaps, the gate droops and drags on the ground until it tears itself apart. We cut out the failed hinge, weld on a proper replacement, and realign so the gate swings true instead of fighting you.

Hinge Replacement

Post Replacement

The hinge post takes the most load in any gate system, and it’s the piece that fails first when water gets into the base or the concrete footing shifts. A sagging gate is usually a post problem in disguise. When a post is too far gone to save, we replace it, reset the footing, and weld the frame back to a solid anchor point.

Post Replacement

Rail Repair

Rails are the horizontal bars tying the frame together, and a cracked or rusted rail lets the whole gate flex and twist. Left alone, that flex breaks welds at the corners and spreads the damage. We repair or replace the rail and re-weld the joints so the frame holds its shape under its own weight again.

Rail Repair

Custom Welding

Sometimes a gate needs a piece that was never made for it: a reinforcing gusset, a new top rail, a bracket for a motor, or a repair to a wrought-iron section that no catalog part will fit. We weld custom pieces on site, in your driveway, matched to the existing metal. You get a repair built for your gate rather than a generic part forced to fit.

Gate Rollers

Sliding gates ride on rollers, and worn rollers make the gate grind, jump the track, or stop halfway. Bad rollers also strain the operator motor, which is an expensive way to find out the rollers were shot. We replace worn rollers, check the track alignment, and confirm the gate rolls smoothly before calling it done.

Latch & Lock

A latch that won’t catch or a lock that won’t engage leaves your property open whether you realize it or not. We repair and replace latches, locks, and the hardware that keeps a gate closed and secure. If the gate is part of an access-control setup with a LiftMaster or Linear operator, we make sure the mechanical latch and the electronic release work together.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 761-9351

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Brands We Service for Gate Parts & Welding

We work on the equipment North Las Vegas homeowners actually have. LiftMaster operators are common on residential driveways, and we know where their hardware mounts and how a bent bracket throws the whole gate off. FAAC and BFT systems show up on heavier swing gates, and we understand how their arms and hinges take load so our welding doesn’t fight the operator’s geometry.

Linear and Mighty Mule gate openers turn up on plenty of driveways too, and we’ve learned where the mechanical parts wear out first on each one. Whether your gate runs on LiftMaster, FAAC, BFT, Linear, or any other make, we can help.

Signs You Need Gate Parts & Welding Right Now

  • Your gate sags or drags on the ground. A gate that sags in the middle is usually failing at the hinge post, and that’s where we start. Waiting lets the frame twist and turns a hinge repair into a full rebuild.
  • You can see cracked paint or rust at a joint. Cracks at a weld or hinge point mean the metal is moving where it shouldn’t. It’s the earliest sign of a failing weld and the cheapest time to catch it.
  • The gate won’t latch or swings open on its own. A gate that closes on its own is telling you the posts are out of plumb or a hinge has gone. It’s a security gap as much as a mechanical one.
  • The gate wobbles when you push it. A wobble means loose hardware, a worn hinge, or a post pulling from its footing. Push-test the gate by hand and you’ll feel where the slack is before it fails.
  • Rollers grind or the gate jumps the track. On a sliding gate, noise and jumping mean worn rollers or a misaligned track. Left alone, the operator motor takes the strain and that repair gets expensive fast.

Our Gate Parts & Welding Process – Step by Step

  1. 1
    We look at the gate in person before quoting. We check the hinge post for plumb, feel the frame for flex, and look at the welds and hardware. No phone guess becomes a surprise invoice.
  2. 2
    We explain what failed and why. You hear the diagnosis in plain terms, including what happens if it’s left alone, so you can make a real decision.
  3. 3
    We give you an upfront price in writing. The price is quoted and agreed before any work starts. No haggling, no numbers that climb at the door.
  4. 4
    We weld and repair on site. The gate stays in your driveway. We cut out the failed parts, weld in replacements, and check alignment as we go.
  5. 5
    We test the gate with you and back it in writing. We cycle the gate, check the latch and rollers, and hand you the 90-Day Done Right Promise. If it’s not done right, one call brings us back.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Gate Parts & Welding Cost in North Las Vegas?

Gate parts and welding in North Las Vegas typically runs $150 to $650 depending on what failed, and most single-part repairs land in the $200 to $400 range. A hinge replacement usually runs $150 to $300 per hinge depending on the gate’s weight. Post replacement is the bigger job at $350 to $650 because the footing and alignment have to be reset. Rail repair and custom welding fall around $200 to $500 depending on the length and type of metal. Roller and latch work is on the lower end, generally $120 to $250.

Several things move the number: the gate’s size and weight, whether it’s steel or wrought iron, how far gone the post is, and whether a motor is involved. Rusted or bent bolts, gates that have been patched before, and electric gates with access control all take more time. Our standing offers help: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Every free estimate includes the full diagnosis, the written price, and a clear explanation of what’s included. The price we quote is the price you pay.

Gate Parts & Welding Near North Las Vegas – Our Service Area

We serve North Las Vegas and the communities around it, including Sunrise Manor, Las Vegas, Winchester, Whitney, and Moapa Town. Response times depend on where you are and how the day is running, but most repairs in and around North Las Vegas get handled same-day when the schedule allows. If you’re further out toward Boulder City or Moapa Town, call and we’ll give you a straight answer on timing. Our home page lays out everything we do. For close-by neighborhoods, see Gate Parts & Welding in Sunrise Manor and our Gate Parts & Welding in Las Vegas page. If it’s a structural repair rather than parts and welding, our Gate Repair in North Las Vegas service covers it.

Serving North Las Vegas, NV – Our Local Coverage Area

We serve North Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions – Gate Parts & Welding in North Las Vegas

Schedule Your Gate Parts & Welding Service in North Las Vegas Today

If your gate is sagging, dragging, or failing at a weld, don’t wait for it to break all the way. Call Gatewood Fence & Gate North Las Vegas at (844) 761-9351 for a free, no-obligation estimate and upfront pricing you agree to before work starts. We answer around the clock, and the 90-Day Done Right Promise stands behind every repair.

Looking for more of what we do in North Las Vegas? Our Gate Installation in North Las Vegas service covers new builds, and Gate Motor & Opener in North Las Vegas covers powered systems. If your gate is part of an access-control setup, see Gate Access Control in North Las Vegas.

Written by the team at Gatewood Fence & Gate North Las Vegas.

Why North Las Vegas Chooses Gatewood Fence & Gate North Las Vegas

We set the standard for gate parts & welding in North Las Vegas.

30-60 Min Response

Fast dispatch across North Las Vegas. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in North Las Vegas

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in North Las Vegas - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 60 minutes.
  4. 4
    You approve before work beginsNothing starts until you say go.

What North Las Vegas Customers Say

Trusted by homeowners across North Las Vegas and surrounding areas.

★★★★★

"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."

Lucinda Marchbanks
★★★★★

"He builds the gates himself. That is not something you can say about the outfits that just order a panel in."

Doreen Whitfield
★★★★★

"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."

Otis Redmond

Ready for Gate Parts & Welding in North Las Vegas?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in North Las Vegas.

(844) 761-9351

Request a Free Estimate in North Las Vegas

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - 24/7 Dispatch