A Gatewood company - serving North Las Vegas, NV
Gate Parts & Welding in Sunrise Manor, NV | Gatewood Fence & Gate North Las Vegas - Gatewood Fence & Gate North Las Vegas

Gate Parts & Welding in Sunrise Manor - Made to Measure, Written Price

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Sunrise Manor

If your gate is dragging, sagging, or the latch won’t line up anymore, we fix it here in Sunrise Manor – not by hauling it off, but with on-site welding and real parts. Our technicians have up to 25 years of experience, and they work on gates hung in block piers and welded to the wall every single week in this township. Call (844) 761-9351 and a live person picks up, day or night. We quote the price before we touch a thing.

Call (844) 761-9351

Why Gatewood Fence & Gate North Las Vegas Is Sunrise Manor’s Preferred Gate Parts & Welding Company

Sunrise Manor is where we do a lot of the work we’re proudest of, and folks here know us for it. When a gate hangs from a block pier that’s pulled away from the wall, we re-set and re-anchor the pillar and re-weld the hinge straps – we don’t sell a whole new gate around the problem. Every job comes with the 90-Day Done Right Promise in writing, so if something’s off, one call brings us back.

We answer the phone around the clock with a live person – not a voicemail, not a call center. A repair over $200 gets $40 off, there’s no trip charge inside the county, and seniors and veterans keep a permanent 10% discount. We’ll give you a free second opinion on any written estimate somebody else handed you.

Most jobs in Sunrise Manor run on-site welding, which means the gate stays in your driveway where it belongs. We know the streets, the block walls, and how the caliche soil moves here. That matters more than any sales pitch.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Sunrise Manor

Whether you drive through Sunrise Manor off Charleston or Bonanza, your gate is probably fighting the same three things: rusted hinges, cracked piers, and monsoon-wrecked alignment. Here’s how we handle each piece. For the full picture of what we do, see our Gate Parts & Welding hub.

Hinge Replacement in Sunrise Manor

Original welded-steel hinges rust and seize here after enough 100°F-plus summers, and when they do, the gate sags at the hinge post rather than the panel. That’s where we start – cutting the old hinge, welding a fresh strap, and setting it square. A pair of hinge replacements typically runs $140-$260 in Sunrise Manor, set in the block pier so the swing lands true.

Hinge Replacement in Sunrise Manor

Post Replacement in Sunrise Manor

When the block gate pier has separated from the front wall, no amount of hinge work saves it. We re-set and re-anchor the pillar first, then bring the gate back to it. A post or pier re-anchor usually runs $350-$700 depending on how far the caliche soil has pushed things, and a rusted steel post replacement sits in the $300-$550 range.

Post Replacement in Sunrise Manor

Rail Repair in Sunrise Manor

Monsoon winds rack chain-link and steel swing gates, bending top rails and knocking latches clean out of the strike. We straighten and re-weld the rail on site, then reset alignment so the gate swings clean. Rail straightening and re-welding in Sunrise Manor typically runs $120-$300 per gate.

Rail Repair in Sunrise Manor

Custom Welding in Sunrise Manor

Sometimes the honest answer is a custom bracket, a reinforcement at the pier, or a new latch plate built to fit an older gate. We weld it in the driveway. Custom welding and fabrication on a residential gate generally runs $150-$400 in Sunrise Manor, quoted up front before we start.

We also handle gate rollers and latch and lock work – both common on side and driveway swing gates around ZIP code 89110.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 761-9351

Trusted Brands We Service in Sunrise Manor

We’re certified to service nine major gate brands, including Linear, Viking, DoorKing, and Ghost Controls, and that list covers most of what’s hanging on Sunrise Manor gates. When a brand-specific part is needed, we get it without dragging the job out for weeks, and we’ll tell you honestly whether a part swap is even the right call. No parts warehouse, no upsell – just the repair your gate actually needs, quoted before we begin.

Common Gate Parts & Welding Problems We See in Sunrise Manor Homes

  • Block piers pulling away from the wall. The caliche-heavy soil here swells and shrinks with the seasons, and block gate piers routinely separate from the front wall as it does. That throws the whole swing gate out of alignment before a single hinge has failed.
  • Rusted, seized hinges. Years of extreme Mojave heat seize the original welded-steel hinges, and the gate sags at the hinge post. Tightening a bolt won’t fix that – the hinge itself has to come off and a new one go on.
  • Monsoon-rattled rails and latches. Seasonal monsoon winds rack chain-link and steel swing gates hard, bending rails and knocking latches out of the strike. Left alone, the gate racks further until it won’t close at all.
  • Older chain-link side gates. Many Sunrise Manor homes still have the original welded-steel or chain-link side gates, and they’re often rusted at the hinge and hung off a settled pier. Repair usually beats replacement if the frame is still sound.

Here’s a typical Sunrise Manor lot: a welded-steel or chain-link driveway swing gate hangs from block piers that have separated slightly from the front wall as the caliche soil heaves, so the gate drags, the latch stops lining up, and the hinges have seized from years of 100°F-plus summers. A qualified local tech usually diagnoses the hinge post and pier anchoring before touching the panel – re-setting and re-anchoring the block pillar, then re-welding hinge straps and correcting the sag. Because monsoon winds rack the panels, alignment and latch strike get reset last so the gate swings clean.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Gate Parts & Welding in Sunrise Manor, NV

Here’s what this work runs in Sunrise Manor, quoted clearly so you’re not guessing. Every price is agreed in writing before any work starts, and it doesn’t change at the door.

Job Typical Sunrise Manor Range
Hinge replacement (pair) $140 – $260
Post / block pier re-anchor $350 – $700
Steel post replacement $300 – $550
Rail straighten & re-weld $120 – $300
Custom welding & fabrication $150 – $400
Gate rollers (set) $100 – $220
Latch & lock replacement $90 – $200

What moves the number is how far the pier has separated and whether we’re re-welding to existing steel or fabricating new. Estimates are free, and a repair over $200 comes with $40 off. Call (844) 761-9351 for an exact quote on your gate.

We Also Serve Cities Near Sunrise Manor

We do gate work across the east valley, including Whitney, Winchester, Las Vegas, and North Las Vegas. Same on-site welding, same Done Right Promise, same live person on the phone. If you’re just outside Sunrise Manor, we’ll still come look at your gate and quote it in writing. Reach out and we’ll get you scheduled.

Serving Sunrise Manor, NV – Our Local Coverage Area

We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Sunrise Manor

Get Your Sunrise Manor Gate Fixed Right

If your gate is dragging, sagging, or rusted at the hinge, don’t wait for it to fail all the way. We answer the phone around the clock with a live person, quote the price before any work starts, and back every repair with the 90-Day Done Right Promise in writing. Seniors and veterans keep a permanent 10% discount, and there’s no trip charge inside the county. Call (844) 761-9351 for a free estimate on your gate in Sunrise Manor.

Written by the team at Gatewood Fence & Gate.

Why Sunrise Manor Chooses Gatewood Fence & Gate North Las Vegas

We set the standard for gate parts & welding in Sunrise Manor.

30-60 Min Response

Fast dispatch across Sunrise Manor. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Sunrise Manor

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Sunrise Manor - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 60 minutes.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Sunrise Manor Customers Say

Trusted by homeowners across Sunrise Manor and surrounding areas.

★★★★★

"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."

Lucinda Marchbanks
★★★★★

"He builds the gates himself. That is not something you can say about the outfits that just order a panel in."

Doreen Whitfield
★★★★★

"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."

Otis Redmond

Ready for Gate Parts & Welding in Sunrise Manor?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Sunrise Manor.

(844) 761-9351

Request a Free Estimate in Sunrise Manor

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - 24/7 Dispatch