Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across North Las Vegas
If your gate is dragging, sagging, or the operator quit on you, we fix it in the driveway instead of hauling it off. We connect North Las Vegas homeowners with independent local gate pros who weld on site, so the gate never leaves your property. Getting to you across North Las Vegas is straightforward: we cover Aliante and the older tract streets off Carey and Lamb the same week you call, and often sooner. Call (844) 761-9351 and a live person picks up, day or night.
Why Gatewood Fence & Gate North Las Vegas Is North Las Vegas’s Preferred Gate Parts & Welding Company
North Las Vegas homeowners know what it’s like to get a phone quote and a different bill at the door. We don’t work that way. The price is quoted and agreed before anyone picks up a torch or a wrench, and the 90-Day Done Right Promise is stamped in writing on every job, not tucked in fine print. Our technicians have up to 25 years of experience, and the person who shows up is background-checked and ready to weld.
We’re locally owned and owner-operated, with a published address and license number anyone can look up. When something on a North Las Vegas job needs a second look, one call brings us back. Calls are answered by a live person 24/7, not a voicemail, because a gate hanging crooked at night is still a gate hanging crooked.
That accountability travels well across North Las Vegas. Whether you’re off Aliante Parkway or out near the northern custom lots, the person who answers is the person you’ll see again.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in North Las Vegas
Most of what we do in North Las Vegas is repair, not replace. A gate sags in the hinge post, not in the middle, and that is where we start. Our Gate Parts & Welding team handles the parts and the welding under one roof, so you’re not chasing down a welder and a parts counter separately.
Hinge Replacement in North Las Vegas
A typical hinge replacement in North Las Vegas runs $120 to $240 per hinge, including welding where needed. On 2000s-era steel gates with vinyl infill, the original hinges wear fast because desert dust grits the pivots and the relentless UV dries out vinyl. We cut off the worn hinge, weld fresh steel in its place, and check the alignment across the whole panel while we’re there.

Post Replacement in North Las Vegas
Hinge posts on North Las Vegas steel gates shift in the desert soil, and that footing is usually the real cause of sag. A single post reset or replacement in North Las Vegas typically lands between $450 and $900 once concrete, welding, and re-hanging the gate are counted. Patch the panel and skip the post, and you’ll fix the same gate twice.

Rail Repair in North Las Vegas
Rail repair in North Las Vegas usually runs $150 to $350. Original builder gates take a beating from windblown dust and the occasional monsoon habobos, so rails bend and weld points crack. We straighten what can be straightened and weld a solid new joint where the old one gave out.

Custom Welding in North Las Vegas
When the vinyl on an older gate pulls loose from its steel frame, the fix is often custom welding of new attachment points rather than a whole new panel. Custom weld work in North Las Vegas starts around $90 to $200 depending on how much steel needs replacing. This is also where Aliante and Eldorado HOA rules matter: the community wants a uniform style and color, and we match original profiles so your repair blends with the neighbor’s gate.
Trusted Brands We Service in North Las Vegas
We service nine major gate brands, and in North Las Vegas the names that come up most are LiftMaster on the builder-grade swing gates, Linear on many tract-home operators, and DoorKing on the shared entry systems that older HOAs rely on. We don’t keep parts on a truck or in a stockroom. Instead, we diagnose what’s actually wrong and source the right part, which keeps turnaround tight and keeps you from paying for a motor swap you didn’t need.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in North Las Vegas Homes
- Builder-grade LiftMaster operators failing early. In Aliante, the typical builder operator dies after 5 to 7 years because the control box faces direct afternoon sun and fries the circuit board. We replace it with a sun-shielded or relocated unit so the new one isn’t cooked the same way.
- Hinge posts shifting in the soil. On 2000s steel gates, the hinge post footing walks in the desert ground and the panel starts to sag. The correct fix is resetting or replacing the post footing, not patching the panel around it.
- Brittle vinyl infill pulling loose. The relentless UV cracks the original vinyl and it pulls away from the steel frame. Custom welding of new attachment points and rail repair gets it back where it belongs.
- Operators added to gates that were built manual. Plenty of North Las Vegas gates were hung by hand with no power or conduit ever run. Adding automation means running power and setting up the operator properly, which is a scheduled job, not a same-day patch.
Pricing for Gate Parts & Welding in North Las Vegas, NV
Here’s what the work typically runs in this market. Hinge replacement is $120 to $240 per hinge. A post reset or replacement is $450 to $900. Rail repair is $150 to $350, and custom welding starts around $90 to $200. When a full operator and safety setup is part of the job, that’s quoted separately after we measure.
What you pay depends on how many hinges are shot, whether the post footing needs concrete, and how much steel has to be cut out and re-welded. Every price is quoted and agreed before work starts. Estimates are free, we give a free second opinion on any written estimate, and you’ll get $40 off any repair over $200. Seniors and veterans keep a permanent 10% discount. Call (844) 761-9351 for an exact quote.
We Also Serve Cities Near North Las Vegas
We cover the gate parts and welding work in North Las Vegas and the surrounding communities too: Las Vegas, Sunrise Manor, Winchester, and Whitney. Same upfront pricing, same written 90-Day Done Right Promise, same live person on the phone. If you’re on the edge of town, call and we’ll tell you straight whether we cover your street.
Serving North Las Vegas, NV – Our Local Coverage Area
We serve North Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in North Las Vegas
Yes. We match the community’s original style and color so the repair blends with the uniform look Aliante HOAs require. Because these communities were built from a handful of shared builder models, we know the steel frame and vinyl infill profiles on those gates and can match them on the weld and finish. Call (844) 761-9351 and we’ll come look at the gate and your HOA’s rules.
Because the afternoon sun bakes the control box directly, and that’s what kills the board. Builder-grade LiftMaster units in Aliante tend to fail after 5 to 7 years for exactly this reason. The fix isn’t just swapping the operator; it’s relocating or shielding the unit so the replacement isn’t cooked the same way. Call (844) 761-9351 for a free look at where yours sits.
In most cases you can automate the gate you already have. The catch is power and conduit: many North Las Vegas gates were hung manual with no run for electricity, so the job includes pulling power and setting up the operator with proper safety devices. That’s measured and scheduled, not same-day. Call (844) 761-9351 and we’ll set up a free measure and a written price.
Usually it’s the post, not the hinges alone. A gate sags in the hinge post, and on 2000s-era North Las Vegas gates the footing shifts in the desert soil while the hinges wear from dust. Fix the panel and skip the post and you’ll be back at it in a year. Call (844) 761-9351 and we’ll tell you which it is before you spend a dollar.
An automatic gate needs a UL 325-compliant operator with safety photocells so it reverses if something’s in the path, and we set those up as part of any automation job. On top of the safety edges, North Las Vegas homes often need the operator shielded from direct sun and the power run done to code. Call (844) 761-9351 for a free estimate that covers the operator, the safety devices, and the power run.
Written by the team at Gatewood Fence & Gate.