Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterGate Parts & Welding Near You in North Las Vegas, NV
If you’re searching “gate parts and welding near me” in North Las Vegas, you want someone who can diagnose the problem, match the part, and weld it back together on-site rather than after a two-week wait. We do exactly that. Gatewood Fence & Gate repairs gates in your own driveway, and a live person answers the phone day or night at (844) 761-9351. One call gets you a straight answer and an upfront price before any work starts.
We take care of homeowners across North Las Vegas and the surrounding valley, from the older block-wall properties off Carey Avenue to the newer builds out toward the Beltway. If a gate is dragging, squealing, sagging, or just won’t latch, that’s the call we want.
Key Takeaways
- We weld on-site so the gate never leaves your property.
- We repair first and only recommend replacement when a fix won’t hold.
- Upfront pricing, no trip charge inside the county, and $40 off any repair over $200.
- Live person answers every call, 24/7, at (844) 761-9351.
- Every job is backed by our 90-Day Done Right Promise in writing.
Fast, Local Gate Parts & Welding
When a gate fails, it stops being a minor annoyance fast. A driveway gate that won’t close leaves the yard open. A pedestrian gate that won’t latch is a security gap. We treat those as same-day problems whenever parts allow, and we keep the common hardware on hand so we’re not ordering a hinge and waiting a week for it to arrive. Our technicians have up to 25 years of experience, which means they’ve seen most of the failure patterns this desert climate throws at a gate and know what to check first.
Here’s the practical part. North Las Vegas heat does a number on gate hardware. Steel expands and contracts through the swing of a 105-degree summer day, powder coat fades and cracks, and the hinge post takes a beating from sun-baked soil that shifts when the summer monsoon rolls through. When we get a call about a gate that “used to close fine,” we start at the hinge post, because that’s usually where the gate actually failed. The gate sags in the post, not in the middle, and fixing the panel without addressing the post just means you’ll be fixing it twice.
We come out, look it over, and tell you what we’d do in plain language. No upsell, no hauling the gate off to a shop. The welding happens in front of you. If a part needs replacing we match it, install it, and check the whole swing before we pack up. If we can repair the original hardware instead of swapping it, that’s what we do. Fix what’s broken, leave the rest alone.
What Kinds of Gate Parts & Welding Do We Handle?
We work on swing gates, slide gates, pedestrian gates, and the hardware that keeps them moving. The typical calls in North Las Vegas run across a handful of repeat offenders:
- Hinge and post repair – sagging gates, wallowed-out hinge mounts, posts that have pulled from their footing.
- Welding and re-welding – cracked frame corners, broken picket welds, failed brackets, gate frames that split at the joints.
- Latches and catches – pedestrian gate latches that won’t hold, magnetic catches that have given up, self-closing hinges that don’t quite close.
- Rollers, tracks, and guides – slide gate wheels that bind, bent tracks, worn guide rollers.
- Motor and opener hardware – we’re certified to service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
If you’re not sure what category your problem falls into, that’s fine. Show us the gate closing on its own or catching halfway, and we’ll find where it’s failing. That’s a five-minute look for us and a much faster path than guessing at parts over the phone.
How On-Site Gate Welding Works
- Call and describe the problem. A live person answers 24/7 at (844) 761-9351, or you can reach us online. Tell us roughly what’s wrong and where you are.
- We set a window and keep it. You get a time, and someone shows up in that window. No all-day “sometime between 8 and 5” nonsense.
- We inspect and quote upfront. We look at the gate, the hinge post, and the hardware, then hand you a price before any work starts. No trip charge inside the county, and $40 off any repair over $200.
- We weld and repair in your driveway. The gate stays put. Repairs happen on-site with the right hardware, and we test the full swing before we leave.
- You get the 90-Day Done Right Promise in writing. If something we touched isn’t right, one call brings us back. No runaround.
Why Repair-First Matters for a Gate
A lot of gate companies want to sell you a new gate. We’d rather fix the one you have. In most of the North Las Vegas homes we see, the gate frame itself is sound. What fails is the hardware – a hinge, a roller, a bracket, a weld at one corner. Replacing the whole gate because a hinge mount wallowed out is like buying a new truck because you got a flat. We fix the actual problem, and the gate keeps working.
Fix the panel without the post, and you’ll fix it twice. We see that plenty, too – a gate that was “repaired” once before, patched in a way that looked done until the next summer heat pulled it apart again. When we find sloppy work somebody left behind, we say so, and we do it properly. A clean weld on a solid post holds. A patch job on a shifting post doesn’t.
Gate Part Pricing in North Las Vegas
Exact pricing depends on the part and the damage, but here’s a general range so you know roughly what to expect. We hand you an upfront number before we touch the gate, and the estimate never changes at the door.
| Part or Service | Typical Range |
|---|---|
| Hinge replacement or re-weld (swing gate) | $120 – $280 |
| Gate frame weld repair (cracked corner, split joint) | $150 – $350 |
| Latch, catch, or self-closing hinge swap | $90 – $220 |
| Slide gate roller or guide replacement | $130 – $290 |
| Hinge post repair or reset | $250 – $600 |
Seniors and veterans get a permanent 10% discount. Every written estimate comes with a free second opinion if you want one from us – just call. Call (844) 761-9351 for an exact quote on your gate.
Areas We Cover
We cover North Las Vegas and the surrounding communities across the valley. If you’re in Sunrise Manor, Winchester, Whitney, or Las Vegas proper, you’re inside our range. Same goes for Paradise, Spring Valley, and Summerlin. The name is on the shop, and the shop is down the road – that’s the oldest accountability there is. If you’re not sure whether your street is covered, just call and ask. For a closer look at the parts side of what we do, see our page on Gate Parts & Welding in North Las Vegas.
FAQs
How fast can you get to my gate in North Las Vegas?
For most calls in North Las Vegas and the immediate area, we can be out same day when parts allow, and often within a few hours if you call early. We set a specific window and stick to it. Call (844) 761-9351 for the fastest answer on today’s availability.
Do you serve my area?
Yes, if you’re in North Las Vegas or anywhere in the surrounding valley – Sunrise Manor, Las Vegas, Winchester, Whitney, Paradise, Spring Valley, and Summerlin are all inside our coverage. There’s no trip charge inside the county. If your address is on the edge of that, call and we’ll confirm.
How much does gate welding or parts repair cost here?
Most gate part and welding repairs in North Las Vegas land between $120 and $350 depending on what failed and the part involved, with hinge post repairs running higher. You get an upfront price before any work begins, plus $40 off any repair over $200 and a permanent 10% discount for seniors and veterans. Call (844) 761-9351 for a free estimate on your specific gate.
Do you answer the phone after hours?
Yes – a live person answers every call, 24 hours a day, 7 days a week. Not a voicemail, not a queue. A gate that won’t close at 9 p.m. is still a problem tonight, so you can call (844) 761-9351 any time and reach someone who can help.
Call for a Free Estimate
A broken gate gets worse with time, and the heat here doesn’t help. Whether it’s a cracked weld, a hinge that’s given out, or a slide gate that’s started to bind, we’ll come out, look it over, and tell you straight what it needs. Upfront pricing, no trip charge inside the county, and on-site welding so the gate stays where it belongs. Call (844) 761-9351 for a free estimate and a window we’ll actually keep.
Written by the team at Gatewood Fence & Gate North Las Vegas, serving North Las Vegas and nearby areas.
What Our Customers Say
"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks"He builds the gates himself. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond