Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in North Las Vegas?
Gate installation in North Las Vegas typically runs $1,800 to $4,200 for a standard residential driveway gate, installed and working, and $650 to $1,400 for a simple walk gate. Add an automatic opener and the all-in total usually lands between $3,200 and $6,800. The gap between those numbers isn’t a sales trick – it comes down to gate width, material, and whether the ground is ready for posts.
Most homeowners we talk to want one thing before anything else: a real number, not “it depends.” So here’s the honest range first, then the detail. Free estimates are always available, and the price you hear is the price on the invoice.
Key Takeaways
- Standard driveway gate installed: $1,800 to $4,200.
- Automatic opener added: $1,200 to $2,600 on top of the gate.
- Walk gate installed: $650 to $1,400.
- Slope, caliche, and old-post removal are the three biggest reasons a North Las Vegas install goes over budget.
- Older hardware can often be repaired instead of replaced – we’ll tell you straight if that’s the better call.
Gate Installation Cost Breakdown (2026)
Here’s how the line items break out for a typical North Las Vegas driveway gate. These are installed prices, materials and labor together, not just part numbers.
| Line Item | Typical 2026 Price Range |
|---|---|
| Standard walk gate (3 – 5 ft) | $650 – $1,400 |
| Driveway gate, basic metal or wood | $1,800 – $2,800 |
| Driveway gate, custom or ornamental | $2,800 – $4,200 |
| Automatic gate opener (LiftMaster, FAAC, BFT, or similar) | $1,200 – $2,600 |
| Posts and concrete footings | $300 – $900 |
| Old gate and post removal | $150 – $500 |
| Access control or keypad entry (DoorKing, Linear) | $400 – $1,100 |
| Safety sensors and reversing hardware | $150 – $400 |
A basic walk gate stays under a thousand dollars most of the time. A full automatic driveway setup with a custom gate, keypad, and safety sensors is where you’ll see the numbers climb toward six thousand. The individual line items are what move the total, and they move for real reasons – not because the guy at the door added something.
If you want a walkthrough of the full service and what gets installed, our Gate Installation in North Las Vegas page lays it out step by step.
What Affects Gate Installation Pricing in North Las Vegas
Prices here aren’t the same as prices in a flat-lot suburb. North Las Vegas has specific conditions that change the number on the invoice, and it helps to know what they are before you get a quote.
- Slope and grading. Plenty of properties in the Aliante and Eldorado neighborhoods sit on a slope, and a gate on a grade needs rack-and-pinion or a heavier swing arm to work right. That adds cost. A flat lot is cheaper to install correctly.
- Caliche and hard dig. North Las Vegas soil often has caliche layers that slow post digging and require the right equipment. A standard footing that takes an hour somewhere else can take three here, and that labor shows up in the quote.
- Gate material. A simple steel frame gate is the most affordable. Wrought iron, cedar, and composite push the total up because of materials and weight. Heavier gates also need heavier hinges and stronger posts.
- Manual vs. automatic. A manual gate is the budget choice. Once you add an opener, safety sensors, and a control board, the total climbs by $1,200 to $2,600. That’s still money well spent for a driveway you use twice a day.
- Brand and motor choice. We’re certified on nine major brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – and the brand you pick affects both the motor price and the long-term service picture.
- Old hardware removal. If there’s a sagging gate or a rusted post to pull, that’s disposal and prep work, usually $150 to $500. Sometimes the right move is to fix what’s there instead of starting over, and we’ll tell you which makes sense.
A gate sags in the hinge post, not in the middle – and that’s where we start any evaluation. If the post is sound, a lot of “replacement” jobs turn out to be repairs.
Why Install Prices Swing So Much in North Las Vegas
Two neighbors on the same street can get very different quotes for what sounds like the same gate. The reason is almost always in the ground and the hardware, not the gate itself.
The Valley’s summer heat is hard on outdoor metal and wood. Gates that face west and take full afternoon sun in the summer expand and contract more, and openers work harder. We see more motor and hinge wear on sun-exposed gates near Craig Ranch and Centennial than we do on shaded properties. That’s not a reason to skip an opener – it’s a reason to buy the right one and have safety and limit switches set up correctly from day one.
Wind is the other factor. North Las Vegas gets real gusts through spring and early summer, and a tall, light gate with a small footing will start to lean within a year or two. Heavier posts and better anchoring prevent that. It’s the difference between a gate that’s still true five years out and one that needs re-hanging.
Estimates come from people who actually look at the post, the soil, and the slope. A quote taken over the phone without seeing the property is a guess. For more on what a proper install involves, see the full installation service – or start from our home page to see everything we handle.
How to Save on Gate Installation
You don’t have to overpay for a good gate. A few practical moves keep the number down without cutting corners.
- Choose manual if you don’t need automatic. A manual driveway gate saves $1,200 to $2,600 right off the top. Add the opener later if you find you want it.
- Keep the existing posts if they’re sound. New posts and footings run $300 to $900. If your current posts are solid and plumb, reusing them trims the bill.
- Repair before you replace. If your gate sags, sticks, or won’t close on its own, it’s often a hinge or latch problem, not a reason to install a new gate. We fix the panel without replacing the post because fixing one without the other means you’ll fix it twice.
- Fix it in the off-season. Scheduling in cooler months can make a job easier to fit and sometimes cheaper if you’re flexible on timing.
- Ask for a free estimate and a free second opinion. If you already have a written estimate from another company, bring it. We’ll look it over at no charge and tell you what’s fair and what isn’t.
- Take the standing offers. The 10% seniors and veterans discount is permanent. No trip charge inside Clark County. $40 off any repair over $200. Those aren’t specials – they’re always there.
To get a real number on your property, call (844) 761-9351. Estimates are free, the price is straight, and the phone is answered by a live person – day or night.
Repair or Replace? A Quick Way to Decide
The question we hear most: is it cheaper to repair or replace? The short answer: if the post is sound and the frame is straight, repair almost always wins.
A repair job for a sagging gate or bad hinge usually runs well under $600, and much of that is labor. A full replacement gate runs $1,800 to $4,200. If you’re facing a repair bill that’s most of the way to replacement cost, replacement is the sensible call. If it’s a hinge, latch, or opener issue and the gate itself is fine, fix it.
The trick is knowing which situation you’re in. That’s what a free estimate is for. We’ll tell you straight which one makes more sense for your gate – and if repair is the answer, we say so.
Step-by-Step: What a Gate Installation Looks Like
- Walk the property. We look at the post, the slope, the soil, and the swing. Where the gate lands determines everything else.
- Measure and quote. You get a written estimate with line-item pricing, so you know what each piece costs. No surprises at the door.
- Clear and prepare. Old hardware and posts come out if needed. Then footings are set and aligned to the grade.
- Set posts and anchor. The hinge post gets set in concrete, plumb, and squared. This step does most of the work of a long-lasting gate.
- Hang and weld. The gate goes on and any on-site welding is done in your driveway. That means the gate stays put, not hauled off to a shop.
- Add opener and controls. If there’s an automatic opener, sensors, limit switches, and any access control get wired and tested.
- Test and demonstrate. We run the gate, check the sensors, and walk you through operation. Nothing leaves until it’s working correctly.
Safety note: automatic gates carry real injury risk. The reversing sensors and safety loops are not optional add-ons – they’re what protect kids and pets. If you have an existing opener making erratic noises or failing its sensor test, have it looked at before you keep using it. That’s a job for a trained installer or technician, not a weekend bolt-on.
Why North Las Vegas Homeowners Call Us
Most people who call us are done with the big companies that quote one price on the phone and charge a different one at the door. We don’t do that. The quote you get in writing is what you pay.
Our technicians have up to 25 years of experience. We’re certified on nine brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Every job comes with a 90-Day Done Right Promise in writing: if it’s not done right, we make it right. No hoops, no runaround.
Our repair-first philosophy means we don’t swap parts that don’t need swapping. If a post is fine, we work with it. If a panel is salvageable, we salvage it. And when we do install, we do it correctly the first time so it stays put. If you’d like to see how a repair-first approach handles an older gate, look at how we handle gate installation in North Las Vegas.
We’re locally owned and owner-operated, and the name is on the shop and the license is on file. If you want to see it, come look us in the eye. That’s the oldest accountability there is.
FAQs – Gate Installation Cost
How much does gate installation cost in North Las Vegas?
Gate installation in North Las Vegas runs $1,800 to $4,200 for a standard driveway gate and $650 to $1,400 for a walk gate, installed. Adding an automatic opener brings the total to $3,200 to $6,800. For an exact quote on your property, call (844) 761-9351 – estimates are free.
Is it cheaper to repair or replace a gate in North Las Vegas?
Repair is usually cheaper when the post is sound and the frame is straight, often well under $600 compared to a $1,800 to $4,200 replacement. If the post is failing or the frame is warped, replacement makes more sense. Call (844) 761-9351 for a free estimate and we’ll tell you which one fits your gate.
How much does an automatic gate opener cost installed in North Las Vegas?
An automatic gate opener typically costs $1,200 to $2,600 installed, including the motor, safety sensors, and controls. The brand and the gate weight both move the number. Part of that adds access control like a keypad, which runs $400 to $1,100. Call (844) 761-9351 for a firm quote.
Can you come out to North Las Vegas the same day?
We answer the phone 24/7, so same-day estimates and service are often possible depending on the schedule. Many North Las Vegas jobs get quoted within a day or two of the call. Call (844) 761-9351 and we’ll tell you the soonest we can be out.
Do you offer free estimates and any discounts in North Las Vegas?
Yes. Estimates are free, and we offer a permanent 10% discount for seniors and veterans, $40 off any repair over $200, no trip charge inside Clark County, and a free second opinion on any written estimate. The 90-Day Done Right Promise is included on every job at no extra cost. Call (844) 761-9351 to set one up.
Get Your Free Gate Installation Estimate
The fastest way to know what your gate will actually cost is to have someone who knows gates look at it. We’ll walk the property, tell you the real number, and put it in writing – no haggling, no surprise at the door. If you’re comparing quotes, bring them. The free second opinion is there for a reason.
Call (844) 761-9351 for a free estimate. A live person answers, every call, around the clock. If your property is nearby, we also handle gate services and installation in the surrounding area, and you can start at our home page to see the full range of what we do.
Gatewood Fence & Gate North Las Vegas. Locally owned, owner-operated, and the name is on the shop. The 90-Day Done Right Promise is stamped in writing on every job.
Pricing reflects the North Las Vegas market as of 2026. Gatewood Fence & Gate North Las Vegas offers free estimates – call (844) 761-9351.
What Our Customers Say
"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks"He builds the gates himself. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond