A Gatewood company - serving North Las Vegas, NV

FAAC Gate Access Control in North Las Vegas, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

FAAC Gate Access Control in North Las Vegas: What to Know First

We service FAAC gate access control in North Las Vegas as an independent FAAC service provider – keypads, remotes, phone entry, card readers, video intercoms and smart access modules mounted on FAAC operators. Most access-control repairs are done in a single visit, often same-day when the part isn’t special-order. We quote before we touch anything, and the price we say is the price you pay – no trip charge inside the county, and a free second opinion on any written estimate you already have. Call (844) 761-9351.

Call (844) 761-9351

This page is for the homeowner who already has FAAC hardware on their gate in North Las Vegas – a 400-series or 390-series swing operator, a 770 or 844 slide operator, or a recently installed E-series unit – and whose keypad stopped taking codes, whose remote quits halfway down the driveway, or whose intercom only works when the sun isn’t hitting it. Not a brand sales pitch. Just what actually goes wrong and what it costs to fix.

How FAAC Products Fail – and How We Fix Them

FAAC builds solid equipment, and the failures we see are rarely the motor board itself. They cluster around the access-control board, the reader, and the wiring between them. Here’s what we actually find on FAAC gates in North Las Vegas, and what the fix looks like.

  • Keypad reads fine but the gate doesn’t move (400-series and 390-series swing operators). Nine times out of ten the access-control board has lost its stored codes – usually after a brownout, which North Las Vegas gets plenty of in July and August when the grid strains. Owners assume the operator is dead. It isn’t. We re-program the codes, confirm the board is holding them, and if it isn’t, we replace the board rather than the whole operator.
  • Remote only works from 15 feet, then 10, then not at all (E-series and 844 slide). On FAAC units the receiver is built into the board, and the antenna lead runs down the post. In the desert here, that lead gets baked brittle and the ground connection corrodes at the lug. We’ve pulled leads off gates in Aliante where the copper was green all the way up. We replace the lead, re-ground it clean, and range comes back. Sometimes the remote battery is just tired – we check that first because it costs you nothing to know.
  • Card reader or phone-entry module drops offline after a power flicker. The access module loses its network handshake with the operator. The gate itself is fine. We re-pair the module, verify call-out behavior on your phone, and walk you through what to do next time it happens – which is usually nothing more than cycling power at the disconnect.
  • Video intercom goes dark or grainy mid-afternoon. This one is specific to our climate. The LCD and camera on outdoor intercom units fade under direct sun and heat cycling, and the failure is gradual so people don’t notice until they can’t see who’s at the gate. If the unit is past its useful life, we’ll tell you so instead of chasing the fault. If it’s a connection or a sun-shade issue, we fix that instead.
  • Gate closes on its own, or opens a few inches and reverses (older FAAC 740 and 760 slide operators). The safety edges and the operator’s obstacle-detection are fighting each other, or the limit switch has drifted. Show us the gate closing on its own and we’ll show you where it’s failing – usually a limit cam that’s slipped on the shaft after years of thermal expansion. We reset the limits and test the safety edges before we leave. We never hand back a gate we haven’t watched run through ten full cycles.

If you’re weighing a repair against a replacement, the honest answer is almost always repair. FAAC operators from the last fifteen years are worth fixing. The access-control board and reader are the parts that wear, not the drive.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our FAAC Gate Access Control Process

Here’s what a FAAC access-control job looks like from the phone call to the driveway to the invoice. No surprises in between.

  1. 1
    You call, a live person answers. Any hour, any day. You tell us what the gate is doing and what FAAC model you have if you know it. If you don’t know, we’ll identify it on site.
  2. 2
    We diagnose on site. Board, reader, wiring, remote, operator – tested in sequence so we know which one is actually failing before anything is ordered or swapped.
  3. 3
    We give you the parts decision in plain terms. OEM parts carry the manufacturer’s warranty but cost more and can take longer to arrive. Quality aftermarket boards and readers work and cost less. We tell you the trade-off, not just the price, so you can decide. If you want OEM, we’ll order it and schedule the return visit.
  4. 4
    We do the repair in your driveway. On-site welding when a post, bracket or reader mount needs it – the gate stays on your property. We don’t haul gates off.
  5. 5
    We test it like it’s our own. Codes re-entered and confirmed, remotes range-tested from the end of your driveway, safety edges checked, ten full open-close cycles before we pack up.
  6. 6
    We write the 90-Day Done Right Promise on the invoice. Stamped in writing, not buried in fine print. If something we touched acts up inside 90 days, you call and we come back.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What FAAC Gate Access Control Costs in North Las Vegas

Here are the real ranges we see on FAAC access-control work in North Las Vegas. Every one of these is quoted and agreed before we start, and if the job turns out smaller than expected, the invoice is smaller too.

Job Typical Range
Diagnostic visit (waived if you proceed) $0 trip charge inside the county
Keypad re-program or replacement (FAAC-compatible) $150 – $340
Remote receiver / antenna lead repair $120 – $280
Card reader or phone-entry module re-pair or replace $220 – $520
Video intercom replacement (unit + install) $380 – $850
Access-control board replacement (OEM) $340 – $680
Safety edge / limit switch reset and test $140 – $260

What moves the price: OEM versus aftermarket parts, whether the wire run has to be redone, gate weight and whether the operator needs re-tuning after a board swap, and whether the post needs welding. A $40 discount applies to any repair over $200, and seniors and veterans get a permanent 10%. Estimates are free – call (844) 761-9351 and we’ll give you a real number, not a phone-quote that grows legs.

Why North Las Vegas Homeowners Call Gatewood Fence & Gate North Las Vegas for FAAC Work

We’re locally owned and owner-operated, our address and license number are published, and the name on the shop is the name on every invoice. That’s the oldest accountability there is. When you call, a live person answers – not a voicemail, not a queue three states away. We’ve been at this since 2001 and we’ve serviced FAAC alongside eight other major brands, so we’re not learning on your gate. Our technicians have up to 25 years of experience, and they’re background-checked and uniformed on every job.

The 90-Day Done Right Promise is stamped in writing on every invoice. If we got it wrong, one call brings us back. No runaround.

And when your gate isn’t FAAC – or you’re not sure – we also service LiftMaster, Mighty Mule, Ghost Controls and DoorKing. Show us the label. We’ll tell you what you’ve got and what it needs.

FAQs

Does repairing my FAAC access control void the manufacturer’s warranty? No – using quality aftermarket parts on out-of-warranty units is fine, and on units still under warranty we’ll steer you to OEM parts so the coverage stays intact. We’ll tell you which side of that line your unit falls on before we order anything.

Can you get FAAC parts for my North Las Vegas gate? Yes. OEM parts take longer to arrive than aftermarket, and we’ll give you a realistic timeline up front rather than a date we can’t keep. Most common readers, keypads and boards are in hand within a few days.

My FAAC keypad works but the gate won’t open. Is it the operator? Usually not. The access-control board has likely lost its codes, often after a power event. It’s one of the most common FAAC calls we run in North Las Vegas, and it’s often a re-program rather than a replacement.

Can you come out today? Often, yes – call (844) 761-9351 and we’ll tell you honestly whether we can get to you today or whether it has to be scheduled around a part. We’d rather give you a true answer than an optimistic one.

Should I repair my FAAC operator or replace it? Repair, almost always, if the unit is under about fifteen years old. The access-control side wears out; the drive doesn’t. We’ll give you the repair price and the replacement price side by side and let you decide, with no pressure either way.

Call (844) 761-9351 for a free estimate on your FAAC gate access control in North Las Vegas. A live person answers, any hour. We quote before we start, we weld on site when it’s needed, and we stand behind the work in writing.

Written by the team at Gatewood Fence & Gate North Las Vegas, serving North Las Vegas and nearby areas.

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (844) 761-9351
Local Service Coverage

Request a Free Estimate in North Las Vegas

Tell us what you need - Gatewood Fence & Gate North Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch