A Gatewood company - serving North Las Vegas, NV

FAAC Keypad & Intercom Repair in North Las Vegas, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

FAAC Keypad & Intercom Repair: The North Las Vegas Owner’s Guide

FAAC keypad and intercom repair in North Las Vegas typically runs $150 to $480 installed, depending on whether we’re replacing a keypad membrane, a standalone intercom module, or a combined entry station, and most of that work happens the same day you call. We’re an independent service provider, not affiliated with FAAC, and we work on these systems every week. You usually find out the part has failed in one of two ways: the code that worked for years stops opening the gate, or the intercom button rings and rings with nobody on the other end.

Call (844) 761-9351

Which FAAC Models This Applies To

FAAC ships keypads and intercoms across several operator families, and the part you need depends entirely on which of them is sitting on your gate. The 390, 391, 400, and 402 swing operators commonly pair with FAAC’s metal entry stations, while the 5400, 5500, and 620 sliding operators use either a pedestal-mounted keypad or a wall-mounted intercom head that feeds back to the control board. The 844 and 746 operator lines use their own compatible entry hardware. Before you order anything, find the data plate on the operator housing, not the keypad, and write down the series number. The plate is usually under the cover or stamped on the side of the box.

Here’s the compatibility gotcha most homeowners miss: the keypad face on a FAAC pedestal and the keypad face on a wall-mount are the same footprint but wired differently to the board. Buy the wrong one and it’ll power up and even beep, then refuse to trigger the gate. Match by the wiring diagram inside the station cover, not by the size of the hole. On the OEM question, FAAC originals are worth the money for the encoder and intercom circuit boards because aftermarket boards drift and sometimes won’t learn the code set. Keypad faces and housings? Quality aftermarket parts are fine and save you real dollars.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your FAAC Keypad & Intercom Repair Is Failing

These are the symptoms we see on the calls that come in from North Las Vegas, and what’s actually behind each one.

  • Codes work, then stop. The keypad transmits but the board doesn’t accept it. Usually the wiring terminal inside the station has corroded or the code memory is dropping. Common in Vegas valley dust and dry-season static.
  • Intercom rings but no voice. The speaker or mic has failed on one end, or the intercom wire has a break. Two out of three times it’s the wire, not the module.
  • Buttons feel mushy or double-press. The membrane contact pad is worn through. Once you can feel the difference on a single key, the whole membrane is on its way out.
  • The station powers on but the gate won’t move. That’s often the control board relay, not the keypad. Replacing the keypad first would be a waste of money, which is why we test the board before we quote a part.
  • Display is dim or dead but the buttons work. UV damage on the LCD or LED driver from two decades of North Las Vegas summer sun. The station still functions, but you can’t see the prompts.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here are the installed ranges we quote for FAAC keypad and intercom work in North Las Vegas. The price is quoted and agreed before any work starts, and it doesn’t move.

Work Installed range
Keypad membrane or face replacement $150 – $220
Intercom module replacement (speaker/mic) $210 – $310
Full keypad-and-intercom entry station swap $320 – $480
Wiring repair or terminal rebuild $140 – $260

The range moves on two things: whether your station is pedestal-mount (more labor, more wire run) or wall-mount, and whether the control board needs a companion repair. Parts and labor are itemized separately on the invoice so you can see exactly what you’re paying for. Every job carries the 90-Day Done Right Promise in writing, so if the new part fails, one call brings us back.

DIY or Call Us?

You can safely check the obvious things: power to the station, visible corrosion in the terminal block, and whether the gate responds to the remote instead of the keypad. That last test tells you whether the problem is the keypad or the operator, and it takes thirty seconds.
Where DIY goes wrong on a FAAC entry station is the 12 to 24 volt DC low-voltage circuit and the intercom wire run. Cross the wrong pair and you can fry the control board, which turns a $200 job into a $700 one. We charge no trip fee inside the county, offer a free second opinion on any written estimate, and if you’re a senior or veteran, that 10% discount applies permanently. Call (844) 761-9351 before you pull a screwdriver.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (844) 761-9351
Local Service Coverage

Request a Free Estimate in North Las Vegas

Tell us what you need - Gatewood Fence & Gate North Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch