Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateLinear Gate Access Control in North Las Vegas: What to Know First
We provide independent Linear gate access control service in North Las Vegas: keypad, remote, telephone entry, card reader, video intercom, and smart access work on Linear systems, diagnosed and repaired on site. Most repair calls are handled the same day, and every price is quoted and agreed before any work starts. We’re not the cheapest bid in town, and we don’t pretend to be. We’re the company whose name is on the shop and on every invoice.
This page is for North Las Vegas homeowners who already own a Linear gate operator or entry system and need it working again, or who want a Linear access control setup installed and done right the first time. As an independent Linear service provider, we’re not affiliated with or authorized by Linear. We just know the equipment. Call (844) 761-9351 and a live person picks up, day or night.
How Linear Products Fail – and How We Fix Them
Linear gear shows up on a lot of gates around North Las Vegas, and after years on these systems the patterns are predictable. Here’s what we actually find.
- Keypad and telephone entry boards dying on the post. The Linear telephone entry and keypad units common on residential gates here sit in full afternoon sun with no shade, and the control board or LCD fails long before the mechanics do. In summer the surface heat on a metal post runs well past what the housing was built for. We diagnose the entry board first, because half the “dead keypad” calls we run are a board or terminal problem, not the whole system.
- Remotes that stop holding their code. Linear multi-button transmitters from older production runs lose their channel programming after battery swaps or power surges. Owners assume the receiver is shot and get quoted a new one. Usually it’s a re-learn and a fresh battery, and we test each button before we touch the receiver.
- Card readers and intercoms that work for one person and not the next. On Linear access systems, a reader that reads some cards but not others is nearly always voltage sag at the reader, not a dead reader. We meter the supply at the device under load instead of swapping parts by guesswork.
- Smart access modules dropping off the network. When a Linear operator is paired with a smart access add-on, the module can lose its link to the home Wi-Fi after a router change or a provider update. We re-establish the connection, verify the app actually commands the gate, and walk you through it so the next drop doesn’t need us.
- Gate comes off its limits after a wind event. North Las Vegas wind gusts push a gate past its travel stops, and the operator’s limit settings drift so the gate doesn’t fully latch or reverses mid-travel. We reset the limits against the actual gate position and check the hinges and the hinge post, because a gate closing on its own is telling you something structural, not just electrical. Fix the panel without the post and you’ll fix it twice.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Linear Gate Access Control Process
- 1
You call, a live person answers. Not voicemail, not a queue three states away. We ask what the system is and what it’s doing, and we give you an honest window we intend to keep.
- 2
We diagnose before we quote. On site we meter the operator’s power supply, test the entry device, and check the wiring runs to the keypad, reader, or intercom. We find the actual failure instead of guessing at it.
- 3
We make the parts call with you. OEM Linear boards and modules keep the system warranty-safe and match the existing equipment. Quality aftermarket parts can cost less where OEM is discontinued or back-ordered. We tell you the trade-off plainly and let you decide.
- 4
We repair or install on site. Terminals re-landed, boards replaced, readers re-powered, remotes re-learned. When the post or bracket needs welding, we weld it in your driveway rather than hauling anything off.
- 5
We test it like a customer would. Every code entered, every remote button, every card, the intercom, and the smart access app. We make you run it yourself before we pack up.
- 6
It’s in writing. You get the price we agreed to and the 90-Day Done Right Promise stamped on the job. If something we touched fails, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterWhat Linear Gate Access Control Costs in North Las Vegas
Ranges below are typical for residential Linear work around North Las Vegas. Your actual price depends on the model, the condition of the wiring, and whether we’re repairing or replacing a device.
| Job | Typical Range |
|---|---|
| Diagnostic visit and remote / keypad reprogramming | $95 – $160 |
| Keypad or telephone entry board replacement | $220 – $480 |
| Card reader or video intercom repair | $180 – $420 |
| Smart access module setup or reconnection | $140 – $300 |
| Full Linear access control install (entry device, wiring, testing) | $650 – $1,800 |
What moves the price: how far the entry device sits from the operator, whether the wiring has to be rerun, and whether the gate itself needs hinge or post work before the access control will hold. Repairs over $200 get $40 off, and seniors and veterans get a permanent 10% discount. We quote and agree the price before any work starts, so the invoice matches the number you heard. For a free estimate, call (844) 761-9351.
Why North Las Vegas Homeowners Call Gatewood Fence & Gate North Las Vegas for Linear Work
We’ve been locally owned and owner-operated since 2001, with a published address and a license number anyone can look up. That matters when the last outfit quoted one price on the phone and charged another at the door. Our technicians have up to 25 years of experience, they’re background-checked, and they know Linear equipment specifically. Every job carries the 90-Day Done Right Promise in writing. Calls are answered by a live person 24/7, and there’s no trip charge inside the county. We also service LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so if your setup mixes brands we’re not stumped by the second one. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
FAQs
No, if the work is done correctly with appropriate parts. Using OEM Linear boards and modules keeps the system warranty-safe, and we’ll tell you when an aftermarket part could affect coverage so you’re not surprised later. Call (844) 761-9351 to talk through your specific model.
Usually, yes. Many Linear entry and access parts are still available, though some older boards and modules are discontinued and come as aftermarket replacements. We check availability before we quote so you know what you’re getting. Call (844) 761-9351 and we’ll look up your model.
Repair is the right call most of the time, especially when the operator and mechanics are sound and the failure is one board, reader, or module. We quote the repair first and only recommend replacement when the equipment is past realistic service. Call for a free second opinion on any written estimate.
Most repair calls are handled the same day, and we answer the phone around the clock for gate failures. We give you an honest window and show up in it. Call (844) 761-9351.
Yes. We install Linear keypad entry, card readers, telephone entry, video intercoms, and smart access, including the wiring and testing. New installs are measured and scheduled rather than same-day, and you get a written price before we start. Call (844) 761-9351 for a free estimate.
Written by the team at Gatewood Fence & Gate North Las Vegas, serving North Las Vegas and nearby areas.