Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateLinear Gate Motor Replacement: The North Las Vegas Owner’s Guide
Linear gate motor replacement in North Las Vegas typically runs $650 to $1,400 installed for a residential slide or swing operator, and we can often get a failed unit diagnosed and swapped the same day. That range covers the operator head, mounting and alignment labor, and a function test at the gate. Most owners here don’t discover the motor is dying until the gate stops mid-travel or starts reversing on its own. One day it closes fine. The next it won’t budge, or it moves two feet and gives up. If you’re in North Las Vegas and your Linear operator just quit, call (844) 761-9351 and we’ll tell you straight whether it’s the motor, the board, or something cheaper.
Which Linear Models This Applies To
Linear builds a lot of operators, and the replacement you need depends entirely on which series you’ve got. The common residential slide units are the LSO and LCO lines, and the swing operators show up as the SW and CSW families. The older Osco and Linear Pro access gear still turns up in North Las Vegas yards, especially on gates installed fifteen or twenty years ago. Before we quote anything, we read the data plate on the operator housing. It gives the model number, the voltage, and the gate weight rating. If the plate is faded or gone, we measure the gate leaf and check the control board.
Here’s the part most people miss: the same model number can carry different control boards depending on the production run. Linear revised its boards more than once across the LSO series, and a replacement head that looks identical on the outside won’t talk to your existing accessories if the board revision is wrong. That’s the compatibility gotcha that sends cheap online “exact fit” motors back in a box. On the OEM-versus-aftermarket question, we’ll use a genuine Linear-compatible operator when it matches your gate and the price makes sense, and we’ll tell you when a quality aftermarket equivalent is the smarter call. We don’t carry parts on a truck and we don’t stock them, so the part gets matched to your gate, ordered, and installed. We service Linear alongside LiftMaster, Mighty Mule, and Ghost Controls, and we’re an independent provider, not affiliated with Linear.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your Linear Gate Motor Replacement Is Failing
A dying operator usually tells you before it quits. These are the symptoms we see most in North Las Vegas:
- The gate stalls halfway and reverses. That’s almost always the control board sensing resistance it shouldn’t, either from a binding gate or a motor straining under load. If the gate moves freely by hand, the operator is the problem.
- The motor runs but the gate doesn’t move. A stripped drive gear or a worn chain and sprocket inside the operator. The motor’s fine, the linkage that pushes the gate isn’t.
- Loud grinding or a rhythmic clunk. Gear wear inside the housing. Desert grit works its way in over time, and the gears take the abuse.
- The gate creeps or drifts after it stops. The limit switches or the brake have given up. It’s a safety issue, not just an annoyance, because a gate that drifts can catch a car or a kid.
- Dead on arrival, no lights, no sound. Could be the board, could be a tripped breaker, could be a failed transformer. We check power and the board first, because sometimes it’s a $90 fix instead of a new motor.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In North Las Vegas, a standard residential Linear slide or swing operator replacement lands between $650 and $1,400 installed. The low end covers a straightforward single-leaf gate with a basic operator. The high end is a heavier gate, a swing arm, or a unit that needs new mounting and travel-limit setup. What drives the number is gate weight, operator series, whether the existing wiring and safety edges can be reused, and whether the old mount has to be rebuilt. The price we quote is the price you pay, agreed before we start, no surprises at the door. The $40 off any repair over $200 offer applies, and there’s no trip charge inside the county. Every job carries the 90-Day Done Right Promise in writing. Seniors and veterans get a permanent 10% discount.
DIY or Call Us?
Here’s the honest split. You can safely check a few things yourself: confirm the breaker isn’t tripped, make sure nothing is blocking the gate’s path, and see if the gate swings or slides freely by hand with the operator disengaged. That last check tells you a lot. If the gate is stiff, the operator’s fighting it and replacement won’t fix the real cause. Where DIY goes wrong is the swap itself. Gate operators run on line voltage, and the control board and safety-edge wiring have to be landed correctly or the gate can run when it shouldn’t. A gate that closes on its own without a working safety edge is a real hazard, not a nuisance. This isn’t a job to learn on. If you’re in North Las Vegas and you’re weighing it, call (844) 761-9351 and we’ll give you a straight answer on what your gate actually needs.
FAQs
A residential Linear operator typically lasts 10 to 15 years here, and the desert shortens that. North Las Vegas heat bakes the control boards and the plastic gears, and the grit that blows around wears the moving parts faster than in milder climates. If yours is past a decade and acting up, replacement usually makes more sense than another repair.
Often, yes. We look at the repair first. A bad control board, limit switches, or a worn gear set can be fixed for a fraction of a new operator, and we weld and repair on site rather than swapping parts that don’t need it. If the motor windings or the housing are shot, replacement is the honest call. A free second opinion on any written estimate is yours if another shop already said “replace it.” Call (844) 761-9351.
A straight swap on a standard residential gate usually takes two to four hours once we’re on site. That covers removal, mounting the new operator, setting the travel limits, wiring the safety edges, and testing the gate through full open and close cycles. Heavier gates or a mount that needs rebuilding run longer, and we’ll tell you up front.
We match the operator to your gate and your existing board revision, then order the exact part. We don’t stock parts and we don’t carry them on a truck, so nothing gets guessed at or forced to fit. You get the operator that belongs on your gate, installed and tested, with the 90-Day Done Right Promise in writing.
If your Linear gate motor has quit in North Las Vegas, don’t wait on a gate that won’t close. Call (844) 761-9351 for a free estimate. A live person answers, day or night, and we’ll be straight with you about repair versus replacement.
Written by the team at Gatewood Fence & Gate North Las Vegas, serving North Las Vegas and nearby areas.