A Gatewood company - serving North Las Vegas, NV

Ghost Controls Gate Repair in North Las Vegas, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Gate Repair in North Las Vegas: What to Know First

We repair Ghost Controls gate systems in North Las Vegas on a repair-first basis: most arm and operator failures are diagnosed and fixed in a single visit, and swing-gate hardware repairs usually run $195 to $650, with the exact price quoted and agreed before any work starts. This page is for homeowners who already own a Ghost Controls opener and want it repaired, not replaced. Call (844) 761-9351 and a live person answers, any hour of the day.

Call (844) 761-9351

We’re an independent Ghost Controls service provider, which means we are not affiliated with or authorized by Ghost Controls, and we don’t sell the equipment. What we do is fix it. Our technicians have up to 25 years of experience, and Gatewood Fence & Gate North Las Vegas has been locally owned and owner-operated since 2001, with a published address and license number anyone can look up.

How Ghost Controls Products Fail – and How We Fix Them

Ghost Controls makes a homeowner-oriented swing gate operator: the AXS, AXD and ARD series are the lines we see most often on residential driveways around North Las Vegas, and each has its own pattern of wear. Here’s what actually goes wrong and what we do about it.

  • AXS-series control board and battery failures. The AXS units run off a charged battery, and in North Las Vegas summer heat – we regularly see gate batteries fail early in the summer because they sit inside the control box in direct sun where the box can get blistering hot – the battery packs fail early and the control board follows if you keep cycling it on a dying battery. We test the charging circuit before we replace anything, then decide on an OEM board or a quality aftermarket equivalent and tell you which and why.
  • AXD-series arm wear and slipping. The screw-drive arm takes load every time the gate opens, and on gates that hang even a little crooked the arm binds at the hinge side and wears out fast. We check the arm and the gate sag together, because a new arm on a sagging gate will fail again inside a year.
  • Hinge and post problems that look like operator problems. A gate sags in the hinge post, not in the middle – and that’s where we start. When the gate is dragging, the motor strains, self-closes, or reverses halfway. We weld and re-hang the gate on site so the arm does the work it was built for.
  • Limit and alignment faults. On the ARD-series models the open/close limit points drift once a gate racks out of plumb, so the gate stops short or keeps reversing. Realigning the gate and setting the limits is the fix; resetting the limits on a crooked gate is a callback waiting to happen.
  • Entry and safety-accessory issues. Keypads, loop sensors and photo-eyes fail from dust, heat and gophers in rural parts of North Las Vegas. We test each accessory and repair or replace only the failing part, not the whole bundle.
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Ghost Controls Gate Repair Process

Every Ghost Controls job runs the same way, from the call to the cleanup:

  1. 1
    Talk to a person. A live person answers the call and asks what the gate is doing – stopping short, reversing, beeping, not responding to the remote. We schedule a window and hold it.
  2. 2
    Diagnose the whole gate. We check the operator, the arm, the board, the accessories, and the gate and posts, because the failure is often in the gate, not the equipment. Show me the gate closing on its own and I’ll show you where it’s failing.
  3. 3
    Give you the price before we start. You get a written, upfront price and we agree to it before any work begins. If we find something else, we show you and quote that too – no surprise invoice at the door.
  4. 4
    Fix it in your driveway. On-site welding means we repair the gate and gate hardware where it sits. We choose an OEM part when it’s the right part and a quality aftermarket equivalent when it genuinely is, and we tell you which.
  5. 5
    Test it fully. We cycle the gate through full open and close, confirm the limits, test the safety accessories and the remote, and walk you through it.
  6. 6
    Stand behind it. Every job carries the 90-Day Done Right Promise in writing. One call brings us back, no runaround. If it’s not done right, we make it right.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Ghost Controls Gate Repair Costs in North Las Vegas

Here’s what Ghost Controls gate repair typically runs in North Las Vegas. These are real ranges for what homeowners actually pay – the exact price is quoted and agreed before any work starts.

Job Typical Range
Diagnostic visit (waived if you go ahead with the repair) No trip charge inside the county
Battery and charging circuit repair $150 – $320
Control board replacement (AXS/AXD) $280 – $480
Arm repair or replacement (AXD) $220 – $420
Hinge, post and gate weld repair with realignment $195 – $550

What moves the price: whether we need to re-hang and weld the gate, the model line, OEM versus aftermarket parts, and how many accessories are failing. We offer $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (844) 761-9351 for an exact quote – estimates are free.

Why North Las Vegas Homeowners Call Gatewood Fence & Gate North Las Vegas for Ghost Controls Work

Because we repair first. A lot of shops will look at a Ghost Controls operator and quote you a new gate; we look at what’s actually broken and fix that. Hal’s name is on the shop and on every invoice, and it’s down the road – that’s the oldest accountability there is. You’ll see the same face the next time you’re at the hardware store.

Every job carries our 90-Day Done Right Promise in writing, calls are answered by a live person around the clock, and our technicians are background-checked and uniformed. We’re certified to service nine major gate brands, so if you have a mixed setup – a Ghost Controls operator on one gate and a LiftMaster, Mighty Mule or DoorKing on another – we can handle both. We are an independent Ghost Controls service provider; we don’t have to sell you their equipment to fix it.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (844) 761-9351
Local Service Coverage

Request a Free Estimate in North Las Vegas

Tell us what you need - Gatewood Fence & Gate North Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch