A Gatewood company - serving North Las Vegas, NV

DoorKing Gate Motor & Opener in North Las Vegas, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

DoorKing Gate Motor & Opener in North Las Vegas: What to Know First

We repair and install DoorKing gate motors and openers in North Las Vegas as an independent DoorKing service provider. Most single-family residential failures are diagnosed and corrected in a single visit, and multi-door systems tied into a 1833 or 1837 controller usually run a bit longer because there are more boards and loops to check. Prices are quoted and agreed before any work starts. Call (844) 761-9351 and a live person picks up, day or night.

Call (844) 761-9351

This page is written for the homeowner who has a DoorKing operator bolted to the driveway, a keypad or intercom on the post, and a problem that the installer has never come back to fix. We’re Gatewood Fence & Gate, owner-operated since 2001. Hal Gatewood’s address and license are published, and the name is on every invoice.

How DoorKing Products Fail – and How We Fix Them

DoorKing is a commercial-grade line that lots of North Las Vegas builders put on residential gates, and that combination shows up in predictable places. Here’s what we actually find in driveways around North Las Vegas:

  • 1833, 1835, and 1837 slide operators that stall at the same spot each cycle. Almost always a worn drive sprocket or a chain that’s stretched past adjustment, not a bad motor. The board gets blamed because it throws a fault code, but the symptom returns in exactly the same spot on the track. We pull the chain cover, measure the stretch, and check the sprocket before we touch any electronics.
  • 9010 and 9000 swing operators that “creep” open or reverse mid-swing. On these units, a failing limit cam or a dirty encoder disc mimics a control-board problem. The fix is usually a cam reset and cleaning, not a new board. A lot of our calls are second opinions on a quote for a board swap that wasn’t needed.
  • Battery-backup systems that quietly die in a seasonal outage. North Las Vegas sits where summer heat and winter cold both stress the sealed battery in the DoorKing backup kit. A battery that held fine two years ago can give you zero cycles in a power cut. We load-test it under actual gate weight and tell you whether it needs replacing now or can wait.
  • Keypads and intercoms that stop admitting anyone. DoorKing 1500-series keypads and the intercom module inside the 1837 controller share low-voltage wiring with the operator. A short on one entry point can knock out the whole access system. We trace the low-voltage run and find the actual break, rather than swapping the keypad and hoping.
  • Seized or binding hinges that burn out the operator. A swing operator fighting a hinge that hasn’t been greased in years will overheat and shut down. On DoorKing swing gates, this is the most common cause of motor failure we see. We address the gate first, then the motor, because a new motor on a binding gate fails again inside a season.
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our DoorKing Gate Motor & Opener Process

  1. 1
    The call. A live person takes it, 24 hours a day. We ask what model is on the operator tag, whether the gate is slide or swing, and what it’s doing. That gets the visit close to right the first time.
  2. 2
    Diagnostics on site. We test the operator, board, limits, sensors, and the gate itself. On DoorKing equipment we read the fault history before we touch anything, so the diagnosis is on the machine’s own record, not our guess.
  3. 3
    Parts decision. OEM DoorKing parts are the right call when you’re inside a manufacturer warranty or on a newer install. Quality aftermarket is often the honest answer on an older unit where OEM cost outpaces the value of the operator. We price both and let you choose.
  4. 4
    The repair or install. Welding, hinge work, and gate alignment are done on site so we don’t have to haul the gate off. Motor and board work is done in your driveway with the power isolated and locked out.
  5. 5
    The test. Every job runs a full cycle test: open, close, obstruction reversal, backup battery under load, and every entry point on the keypad. We don’t call it done until the gate does what it’s supposed to do without help.
  6. 6
    The promise, in writing. Every job is stamped with our 90-Day Done Right Promise before we leave. If it’s not right, we come back. One call, no runaround.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What DoorKing Gate Motor & Opener Costs in North Las Vegas

These are the ranges North Las Vegas homeowners see from us for common DoorKing work. Your exact number is quoted and agreed before any work starts, and it doesn’t change at the door.

Job Typical Range
Diagnostic visit (credited toward repair) $95 to $135, no trip charge inside the county
DoorKing slide operator repair (sprocket, limit, chain) $225 to $475
DoorKing swing operator repair (cam, encoder, hinge) $250 to $550
Battery-backup replacement and load test $185 to $340
Keypad or intercom integration and rewiring $275 to $650
Full DoorKing motor/opener replacement (residential) $1,200 to $2,400, installed

Repair over $200, we take $40 off. Written estimate in hand from somebody else, we’ll give you a free second opinion before you spend a dollar.

Why North Las Vegas Homeowners Call Gatewood Fence & Gate North Las Vegas for DoorKing Work

Because we repair first and replace second, and because we’ll tell you when the older DoorKing unit is the better bet. Some jobs do warrant a full replacement, and we’ll say so. Most DoorKing calls in North Las Vegas don’t.

The 90-Day Done Right Promise is in writing on every job. Failures after the fact are our problem, not yours. The person who answers your call is a live human being, and the person at your gate is background-checked and trained on nine major gate brands, DoorKing among them, with LiftMaster, Mighty Mule, and Ghost Controls on the same list. Up to 25 years of combined experience on our team. If you’re a senior or a veteran, 10% comes off, always, no asking.

The name is on the shop and the shop is down the road. That’s the oldest accountability there is.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (844) 761-9351
Local Service Coverage

Request a Free Estimate in North Las Vegas

Tell us what you need - Gatewood Fence & Gate North Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch