A Gatewood company - serving North Las Vegas, NV

DoorKing Gate Parts & Welding in North Las Vegas, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

DoorKing Gate Parts & Welding in North Las Vegas: What to Know First

We handle independent DoorKing gate parts and welding in North Las Vegas, usually as a scheduled visit with a written price in hand before anyone picks up a torch. Parts for DoorKing swing and slide operators are widely available, and most hinge, post, rail, roller and latch jobs are quoted free and finished in a single trip once the right parts are on the truck. You get the number before we start, and it doesn’t change because we found a worn hinge post.

Call (844) 761-9351

This page is for the owner of a DoorKing gate or operator who needs metal fixed and parts replaced, not a new system sold. We’re an independent DoorKing service provider, meaning we’re not affiliated with or authorized by DoorKing. Call (844) 761-9351 and a live person answers, day or night.

How DoorKing Products Fail – and How We Fix Them

  • Hinge post rot and lean on DoorKing swing gates. The operator on a 6002 or 6400 dual-leaf swing gate is usually fine. The hinge post is not. In North Las Vegas the post sits in soil that cycles hard between the dry heat of summer and the cold nights of January, and a gate that gets shoved by wind loads the top hinge until the post leans. We set and weld a proper post and re-hang the leaf square. Fix the panel without the post and you’ll fix it twice.
  • Sagging leaf from worn hinges on 6400-series swings. A gate that drags or hangs low is telling you the hinge barrel is worn, not that the frame is bent. We cut out the old hinge, weld a new heavy-duty barrel hinge in line with the gate’s travel, and check the closing arc against the operator’s limits so the 6400 isn’t fighting the sag.
  • Slide gate roller and track wear on 9100 and 9300 operators. DoorKing slide gate carriages ride on rollers, and in North Las Vegas the fine desert grit that blows across a driveway grinds them down. We replace the rollers and true the track rather than swapping the whole carriage, then re-check the operator’s reverse sensitivity after the gate rolls free.
  • Latch and lock misalignment from a settled gate. A DoorKing 6050 or 6100 operator can drive the leaf perfectly and still leave it short of the latch because the post moved a half inch. We weld the strike back into line and set the lock so the gate actually catches.
  • Rail and frame cracks at weld points. Wind gusts in the valley flex a gate, and the welds at the rail-to-frame joints crack before the tube does. We grind out the old weld and re-weld on site, so the gate stays in your driveway for the repair instead of getting hauled off.
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our DoorKing Gate Parts & Welding Process

  1. 1
    Call and a live person answers. You describe the gate, and we schedule a visit. No voicemail, no queue.
  2. 2
    On-site diagnosis. We walk the gate, check the operator and the frame together, and find the real failure. Show me the gate closing on its own and I’ll show you where it’s failing.
  3. 3
    Parts decision, spelled out. We tell you whether the part is OEM or a quality aftermarket equivalent, what the difference means for your DoorKing operator, and let you pick. No quiet substitutions.
  4. 4
    The repair. We weld and replace parts on site. The gate stays in your driveway.
  5. 5
    Test and re-test. We cycle the gate, check the operator’s limits and reverse sensitivity, and confirm it latches and locks clean.
  6. 6
    The promise in writing. Every job carries the 90-Day Done Right Promise, stamped on the paperwork. One call brings us back, no runaround.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What DoorKing Gate Parts & Welding Costs in North Las Vegas

These are the ranges we quote for common DoorKing jobs in North Las Vegas. The price is quoted and agreed before any work starts, and it doesn’t change at the door.

Job Typical range
Hinge replacement (per hinge, welded) $150 – $300
Hinge post replacement and re-hang $250 – $550
Rail or frame repair with on-site welding $200 – $450
Slide gate roller replacement $120 – $260
Latch and lock alignment $100 – $220
Custom welding / fabrication Quoted per job

What moves the price: post depth and footing, whether the gate is a swing or a 9100-series slide, and OEM versus aftermarket parts. We knock $40 off any repair over $200, there’s no trip charge inside the county, you get a free second opinion on any written estimate, and there’s a permanent 10% discount for seniors and veterans. Call (844) 761-9351 for a free estimate.

Why North Las Vegas Homeowners Call Gatewood Fence & Gate North Las Vegas for DoorKing Work

We’ve been locally owned and owner-operated since 2001, with a published address and license number you can look up. The 90-Day Done Right Promise is on every DoorKing job in writing, so if something we fixed acts up, one call brings us back. Hal and the crew have up to 25 years of experience and weld on site rather than swapping parts that don’t need it. We service nine major brands, so if your control board is LiftMaster, Mighty Mule or Ghost Controls, we’re still the right call. Live person, 24/7. Show me the gate, and we’ll get it right.

FAQs

My DoorKing gate sags – can you weld the hinge on site? We repair and weld in your driveway, so the gate never gets hauled off. A sagging gate usually points to a worn hinge or a leaning post, and both get fixed the same visit. Call (844) 761-9351 for a free estimate.

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (844) 761-9351
Local Service Coverage

Request a Free Estimate in North Las Vegas

Tell us what you need - Gatewood Fence & Gate North Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch