A Gatewood company - serving North Las Vegas, NV

Elite Gate Installation in North Las Vegas, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Elite gate installation in North Las Vegas usually starts with a free on-site measure and a written price, not a phone quote. We install Elite swing, slide and double driveway gates for homeowners across the valley, and most jobs are scheduled a few weeks out once the hardware is ordered. As an independent Elite service provider, we quote the whole job in writing before anything gets dug or bolted, and that number is the number you pay.

This page is for the homeowner with an Elite gate, operator or entry system who needs it installed – or replaced – and wants a straight answer about cost, timing and what actually goes into the ground. If you’d rather talk it through, call (844) 761-9351 and a live person picks up.

How Elite Products Fail – and How We Fix Them

Elite builds gate operators that hold up well when they’re installed right. Most of the problems we see in North Las Vegas aren’t the operator failing. They’re the install underneath it giving way. Here’s what actually goes wrong, and what we do about it.

Call (844) 761-9351

  • Swing gate sag at the hinge post. On Elite swing operators with a long articulated arm, the gate leaf starts dropping at the hinge within a couple of seasons. Owners blame the arm. The real cause is a hinge post that was set shallow in our caliche soil and never got enough concrete around it. We reset the post to depth with the right footer before we touch the operator, because fixing the panel without the post means you’ll fix it twice.
  • Slide gate bind on the track and rollers. Elite slide operators with a rack-and-pinion drive will reverse or strain when the V-groove wheels wear unevenly. On valley floors that see hundred-plus-degree summers, the track expands and the wheels flat-spot faster than they should. We check wheel diameter, track straightness and gate plumb together – a slide operator can’t push a gate that’s already fighting its track.
  • Operator mounting that cracks over time. Concrete pads poured thin or on un-compacted ground will hairline and shift under a heavy Elite arm operator, and the whole assembly walks out of alignment. When we install new, the pad sits on compacted base at the depth the gate weight calls for. When we repair, we re-level and re-anchor rather than stacking shims that fail again next summer.
  • Entrapment safety edge and photo-eye failures. Elite operators wired to older or aftermarket safety edges will throw faults or refuse to close, and in some cases the edge itself stops reversing the gate. That’s a genuine hazard, and we don’t sketch it out over the phone. We test the safety circuit on site and replace the edge and photo-eyes with components rated for the operator.
  • Control board and low-voltage wiring trouble. Wind and monsoon dust work their way into control enclosures, and low-voltage runs buried without conduit fail at the splice. We re-run control wiring in conduit and seal the enclosure, then reset the travel limits and force settings to the gate’s actual weight instead of leaving them at factory defaults.

A note on parts: we use Elite OEM boards and arms when the operator is under its manufacturer’s warranty, so the coverage stays intact. On out-of-warranty units we’ll quote quality aftermarket equivalents where they perform the same and cost less, and we tell you which is which before you decide. We won’t put a part on that voids a warranty you’re still counting on.

Our Elite Gate Installation Process

  1. 1
    The call. A live person answers, day or night. We ask what gate you have, what it’s doing, and we set a time to come measure. No phone estimates that change at the door.
  2. 2
    On-site measure and diagnostics. We look at the gate, the posts, the soil, the power run and the safety setup. On existing hardware we test the operator and pinpoint what’s actually wrong before recommending a full replacement.
  3. 3
    The parts decision. OEM or quality aftermarket, quoted in writing, with the warranty impact spelled out. You approve the number before we order or dig.
  4. 4
    The install. Posts set to depth in our hard soil, pad poured and compacted, operator mounted and aligned, safety edges and photo-eyes wired and tested, low-voltage run in conduit.
  5. 5
    The test. We cycle the gate through travel limits, force settings and every safety reverse. Show us the gate closing on its own and we’ll show you where it was failing – and prove it isn’t now.
  6. 6
    The cleanup and the promise. We haul the debris and leave the site clean. Every job carries the 90-Day Done Right Promise in writing – if it’s not done right, we come back and make it right.
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

What Elite Gate Installation Costs in North Las Vegas

Every install is a free on-site measure and a written price, so treat these as real-world ranges, not a phone quote. What moves the number: gate size and material, driveway width, soil conditions, how far the power and control wiring has to run, and whether the pad and posts are new or existing.

Typical Elite job Usual range
Single swing driveway gate install with operator $2,400 – $4,200
Double swing gate install with operator $3,800 – $6,500
Sliding gate install with rack-and-pinion operator $3,200 – $5,800
Pedestrian gate install $900 – $1,800
Safety edge and photo-eye package $300 – $650
Power run and low-voltage conduit $400 – $1,200

That quoted number is agreed before any work starts, and it doesn’t move at the door. Right now we’re running $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (844) 761-9351 for a free estimate.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Why North Las Vegas Homeowners Call Gatewood Fence & Gate North Las Vegas for Elite Work

We repair what other companies want to replace. Elite is one of nine major gate brands we’re certified to service – alongside LiftMaster, Mighty Mule, Ghost Controls and DoorKing – so we know how this operator compares to the rest and when a repair actually beats a swap. When an Elite operator can be fixed in your driveway, we weld and fix it there instead of hauling it off or selling you new parts it doesn’t need.

Our technicians have up to 25 years of experience, and they’re background-checked and uniformed on every job. A live person answers the phone around the clock – no voicemail, no call queue three states away. The 90-Day Done Right Promise is stamped in writing on every job. When you call for Elite work in North Las Vegas, you get a name you can verify and a written price you can hold us to.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (844) 761-9351
Local Service Coverage

Request a Free Estimate in North Las Vegas

Tell us what you need - Gatewood Fence & Gate North Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch