A Gatewood company - serving North Las Vegas, NV

Elite Gate Motor Replacement in North Las Vegas, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Elite Gate Motor Replacement: The North Las Vegas Owner’s Guide

Elite gate motor replacement in North Las Vegas usually runs $650 to $1,400 installed, depending on the model, the gate’s weight, and whether the arm or the control board is the part that failed. We handle Elite swing and slide operators regularly at Gatewood Fence & Gate North Las Vegas, and most replacements are scheduled within a few days of the estimate. You’ll know it’s time when the gate slows, reverses halfway, or quits in the middle of a cycle and the operator light blinks a fault code instead of moving.

Call (844) 761-9351

Most North Las Vegas owners find out the hard way. The gate works fine through spring, then a 108-degree July afternoon hits and the motor stalls, hums, or trips its breaker. Heat is hard on these units, and a motor that was already tired from a dragging gate gives up in the summer heat.

Which Elite Models This Applies To

Elite makes a range of residential and light-commercial operators, and the part you need depends on which one is on your gate. The common ones we see around North Las Vegas are the swing-arm models (think the Elite AM series and its siblings) and the slide operators for rolling gates. Before anything gets ordered, we read the data plate inside the control box, check the arm or rail for a model stamp, and measure the gate leaf’s weight and length. A 12-foot single leaf and a 20-foot double gate use different torque ratings, and grabbing the wrong unit is the most common mistake we fix after a DIY purchase.

On the OEM question: Elite factory parts fit exactly and carry the factory spec, which matters on the control board and the limit switches. Quality aftermarket arms and motors can be a good value on older units where the factory part is discontinued or back-ordered, but we only use aftermarket parts we’ve installed before and trust. We’re an independent shop, not affiliated with Elite, so our loyalty is to the gate in your yard, not to a parts catalog. If a $40 limit switch fixes it, that’s what you get.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your Elite Gate Motor Replacement Is Failing

These are the symptoms that actually show up on Elite operators in North Las Vegas, and what’s usually behind each one:

  • The gate moves a foot and stops, then reverses. The control board is reading too much resistance, either from a binding hinge, a sagging gate, or a motor that’s lost torque. A gate that drags will kill a healthy motor over time.
  • The motor hums but the arm won’t move. Usually a stripped gear inside the operator or a failed capacitor. On older Elite units the gearset is often the first thing to go after years of heat cycling.
  • Erratic or random opening. Often a failing limit switch or a control board that’s taken on moisture and heat. In North Las Vegas, the dust and the sun cook these boards faster than most people expect.
  • The operator trips the breaker or blows a fuse. A sign of a shorted motor winding or a board fault. Stop running it and get it looked at before it damages the control board too.
  • Loud grinding or screeching during travel. Worn gears, dry pivot points, or a chain that’s jumped the sprocket on a slide unit. Grinding means metal is being removed every cycle.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s how the numbers break down for a typical North Las Vegas job:

Item Typical Installed Range
Swing-arm operator replacement (residential) $650 – $1,100
Slide operator replacement (residential) $850 – $1,400
Control board only $280 – $520
Motor or gearset rebuild (where parts allow) $220 – $480
Safety edge / photo-eye reconnection $90 – $220

What drives the range: the weight and length of the gate, whether the existing wiring and power run are usable, whether safety edges or loops need to be redone, and whether you go OEM or a quality aftermarket unit. Parts and labor are quoted separately and in writing, and the price you agree to is the price on the invoice. No surprises at the door. Every replacement carries our 90-Day Done Right Promise, so if something isn’t right, one call brings us back.

DIY or Call Us?

Some things are safe to check yourself. Look at the gate for sag or drag, listen for grinding, clean the photo-eyes, and read the model plate. That helps us quote accurately. What we’d steer you away from is opening the control box or swapping the operator yourself. Gate operators run on 120-volt line power, and a mistake at the board or the wiring can shock you or fry a $400 part. There’s also the weight: a swing arm under tension and a heavy gate leaf can pinch or crush fingers and hands in a hurry.

Elite motor replacement in North Las Vegas is a job for someone who does it every week. Call (844) 761-9351 and we’ll give you a straight answer and a free estimate.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (844) 761-9351
Local Service Coverage

Request a Free Estimate in North Las Vegas

Tell us what you need - Gatewood Fence & Gate North Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch