A Gatewood company - serving North Las Vegas, NV

Elite Gate Parts & Welding in North Las Vegas, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Elite Gate Parts & Welding in North Las Vegas: What to Know First

We handle Elite gate parts and welding in North Las Vegas as an independent Elite service provider, and most hinge, post, roller and weld repairs take one visit. We diagnose the gate, quote the price in writing, and you approve it before any work starts. On a typical sagging or dragging Elite gate, welding and parts work runs $180 to $650 depending on whether we’re re-hanging a panel or rebuilding a hinge post.

Call (844) 761-9351

This page is for North Las Vegas homeowners who already own an Elite gate and want it fixed by someone who knows the brand, not swapped out by a company that profits from replacement. We work on Elite slide and swing systems across the valley, from the older neighborhoods off Carey Avenue to the newer builds out near Aliante. If your gate is dragging, sagging, or a panel is starting to separate from the frame, call (844) 761-9351 and a live person picks up.

How Elite Products Fail – and How We Fix Them

Elite builds a solid gate, and the failures we see are usually installation or age problems rather than brand problems. Here’s what actually shows up on our North Las Vegas calls:

  • Hinge and post failure on swing gates. A gate sags at the hinge post, not in the middle, and that’s where we start. On heavier Elite swing panels, the post eventually loosens in the soil or the hinge welds crack at the frame. The fix is cutting out the weak weld, reinforcing the post if it has pulled, and re-hanging the panel square. Fix the panel without the post and you’ll fix it twice.
  • Weld separation at panel corners. The welded corners on Elite slide gates take a beating from the daily open-and-close cycle, and we regularly find hairline cracks that have spread into a full separation. We clean the joint, weld it on-site in your driveway, and grind it smooth so the repair is stronger than the original corner.
  • Roller and track wear. Elite cantilever and track slide gates ride on rollers that flat-spot and bind, and the gate starts dragging or jumping the track. We replace the rollers with a matching set rather than one at a time, since a mixed set wears unevenly and you’re back in six months.
  • Latch and lock misalignment. A latch that won’t catch is almost always a gate that’s dropped a fraction of an inch, not a broken latch. We fix the hang first, then adjust or replace the latch and lock hardware so it lines up on its own.
  • Rail and frame corrosion from desert swing. North Las Vegas heat and dust work grit into every pivot and weld seam, and we see rust starting at the bottom rail where sprinkler overspray hits the frame. We wire-brush, treat, and re-weld or reinforce the rail before it fails.

Show us the gate closing on its own and we’ll show you where it’s failing. That’s usually a hinge post or a roller problem in under a minute.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Elite Gate Parts & Welding Process

We keep it simple and we do the work in front of you. Here’s what a typical Elite job looks like from the call to the cleanup:

  1. 1
    Diagnostics on-site. The person who shows up checks the gate hang, the post, the welds, the rollers, and the latch, and tells you in plain language what’s failing and why.
  2. 2
    Parts decision, explained. We tell you whether the part calls for OEM Elite hardware or a quality aftermarket equivalent, what the difference in cost and lifespan is, and what keeps your gate running longest. You decide; we don’t decide for you.
  3. 3
    The repair or weld. We weld on-site in your driveway wherever the repair allows, so the gate stays right where it is instead of getting hauled off.
  4. 4
    The test. We open and close the gate by hand and by operator, check the latch catches, the rollers track clean, and nothing binds or drags.
  5. 5
    The written guarantee. Every job carries the 90-Day Done Right Promise in writing, not buried in fine print. If it’s not done right, one call brings us back.
  6. 6
    Cleanup. We haul off the old parts and sweep the driveway. You shouldn’t be able to tell we were there except that the gate works.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Elite Gate Parts & Welding Costs in North Las Vegas

Price depends on what we find and what it takes to fix it. Here are honest ranges for the most common Elite jobs in North Las Vegas:

Job Typical Range
Hinge replacement (per hinge, welded) $95 – $180
Hinge post reinforcement or replacement $250 – $650
Rail repair or re-weld $150 – $400
Custom welding (frame, corner, bracket) $120 – $350
Gate roller replacement (matched set) $90 – $200
Latch and lock adjustment or replacement $75 – $175

What moves the price is access to the gate, whether the post has pulled out of the ground, how much corrosion we have to cut back before we can weld clean metal, and whether we’re matching OEM Elite parts or using a quality aftermarket piece. We quote it in writing and we don’t change it at the door. Standing offers that don’t require haggling: $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate. Estimates are always free, so call (844) 761-9351 and we’ll give you a number before anyone touches the gate.

Why North Las Vegas Homeowners Call Gatewood Fence & Gate North Las Vegas for Elite Work

We repair what other companies want to replace. That’s the whole idea. When a North Las Vegas homeowner calls us about an Elite gate, they get a person who has been fixing gates since 2001, knows Elite hardware, and would rather weld a cracked corner than sell a new gate. Every job carries the 90-Day Done Right Promise in writing, and if we miss something, one call brings us back. We answer the phone with a live person 24/7, not a voicemail and not a queue three states away. We’re certified to service nine major gate brands, including LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so if your gate turns out to be a mixed setup, we’re still the right call. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (844) 761-9351
Local Service Coverage

Request a Free Estimate in North Las Vegas

Tell us what you need - Gatewood Fence & Gate North Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch