Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateElite Gate Repair in North Las Vegas: What to Know First
We provide independent Elite gate repair in North Las Vegas, and most swing and slide gate failures we see on Elite operators are diagnosed and repaired in a single visit. If a control board or motor has to be ordered, you’ll usually be back up and running within two or three business days. We quote every job up front, you approve it before we touch the gate, and the price on the invoice matches the price we agreed. That’s the whole posture.
This page is for the homeowner with an Elite operator on their gate who is hearing a grind, seeing a code, or watching the arm stall halfway and needs an honest answer about repair, parts, and cost in North Las Vegas. Call (844) 761-9351 and a live person picks up, day or night. We’re an independent Elite service provider, not affiliated with or authorized by the manufacturer.
How Elite Products Fail – and How We Fix Them
Elite builds several operator families that show up on North Las Vegas gates, and each one has a failure pattern we’ve learned to recognize before we take a cover off. Here’s what we actually find.
- Swing operator arms that stall or reverse mid-travel. On the Elite swing series common on residential driveways, a stalling arm is usually a worn limit switch or a control board that lost its programming after a power flicker, not a dead motor. North Las Vegas summer heat browns out transformers, and that resets the board. We test the arm under load and reprogram or replace the switch before anyone talks about a new operator.
- Slide gate rollers and track wear that looks like an operator problem. On Elite slide operators, the motor gets blamed for uneven travel that’s really a flattened roller or a track that bowed in the sun. The operator is fighting drag. We free the gate by hand first; if it rolls smooth, the fix is rollers and track, and the operator stays.
- Cracked hinge posts and sagging gate frames. A gate sags in the hinge post, not in the middle, and that’s where we start. Elite operators are strong enough to mask a sagging gate by pushing through it, which is why homeowners call about the motor and not the metal. We weld the post and frame repair on site so the gate stays in your driveway.
- Control boards and receiver failures after monsoon-season surges. The board in an Elite operator is the first thing to go when lightning walks the fence line. We bench-test the board and receiver, and where an OEM board is discontinued or priced out of reason, we fit a quality aftermarket control that keeps the operator and its safety edges working. Fix the panel without the post and you’ll fix it twice; same idea with boards and wiring.
- Locks, latches, and access hardware that won’t line up. When an Elite operator closes a gate against a latch that’s drifted, the arm gets blamed again. We realign the gate, adjust the latch and stop points, and test the close cycle until it seats clean. On northern Clark County lots with a lot of wind-blown grit, we also clear and lubricate the latch linkage while we’re in there.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Elite Gate Repair Process
- 1
Call and describe it. A live person answers and takes the symptoms, the model if you have it, and whether the gate is stuck open, stuck closed, or cycling on its own.
- 2
On-site diagnosis. We free the gate by hand, check the hinge posts and track, then load-test the operator and read the board. We tell you what’s broken and what isn’t.
- 3
Parts decision. OEM where it’s available and sensible, quality aftermarket where the OEM part is discontinued or overpriced. We explain the trade-off and let you choose.
- 4
The repair. Welding on site where metal is involved, parts swapped, wiring and safety edges checked so the operator shuts down the way it should.
- 5
Test cycle. Show me the gate closing on its own and I’ll show you where it’s failing. We run it open and closed, under load, and watch the reverse.
- 6
Cleanup and the promise. We clean the site and hand you the 90-Day Done Right Promise in writing, not buried in fine print. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Elite Gate Repair Costs in North Las Vegas
Elite gate repair in North Las Vegas typically runs $185 to $650 depending on the part and the operator. Here’s how it breaks down for the jobs we actually do.
| Repair | Typical range |
|---|---|
| Diagnostic and adjustment (limits, stops, latch) | $95 – $175 |
| Swing arm or limit switch repair | $185 – $340 |
| Control board or receiver replacement | $280 – $520 |
| Slide operator rollers and track service | $220 – $480 |
| On-site welding: hinge post, frame, or rust repair | $250 – $650 |
| Lock and access hardware repair | $120 – $260 |
What moves the price: OEM versus aftermarket parts, whether the gate frame needs welding, whether the operator is a discontinued Elite model, and access. Every price is quoted and agreed before any work starts; no surprise at the door. First-time customers get $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (844) 761-9351 for an exact quote. Estimates are free.
Why North Las Vegas Homeowners Call Gatewood Fence & Gate North Las Vegas for Elite Work
The name is on the shop, and the shop is down the road. That’s the oldest accountability there is. Gatewood Fence & Gate North Las Vegas has been locally owned and owner-operated since 2001, proudly serving local communities for over 29 years, with a published address and license number anyone can look up. Hal Gatewood’s name is on the shop and on every invoice.
Calls are answered by a live person 24/7, not voicemail or a queue. The person who shows up knows Elite and our other brands, including LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, and our technicians have up to 25 years of experience. Every job carries the 90-Day Done Right Promise in writing: one call brings us back, no runaround. If you’d rather look us in the eye first, drive to the shop in North Las Vegas and do it.
FAQs
Will repairing my Elite operator void the manufacturer’s warranty?
No, not when it’s done correctly. We use OEM parts where the warranty is live and match the operator’s specs on any aftermarket part, so we keep you inside Elite’s terms while fixing what’s broken. If a part is still under manufacturer coverage, we say so plainly and point you to the claim before we touch it. Call (844) 761-9351 and we’ll walk through what your model covers.
Can you get parts for an older Elite operator?
Usually, yes. Some older Elite boards and receivers are discontinued, which is where our aftermarket sourcing matters: we fit a quality control board that keeps the operator, safety edges, and remotes working rather than selling you a whole new unit. We tell you up front whether it’s OEM or aftermarket and what it means for you. Estimates are free; call us for a second opinion on any written estimate you already have.
Should I repair or replace my Elite gate operator?
Repair almost always comes first, and replacement is the last answer. If the gate rolls freely by hand and the frame and posts are sound, the operator is almost always fixable. We only recommend replacing when the motor itself is dead and the part is unavailable, or when the operator has been run hard on a bent gate for years. Call (844) 761-9351 and we’ll give you a straight answer on both.
How fast can you get to my Elite gate repair in North Las Vegas?
Most Elite repair calls in North Las Vegas are handled the same day or next business day, and a live person answers every call 24/7 when a gate is stuck open and your property is exposed. We give you a window and we show up in it. No trip charge inside the county. Estimates are free.
Do you handle the power run, wiring, and safety edges on an Elite job?
Yes. When an Elite repair touches the control board, receiver, or safety edges, we check the wiring and power run so the operator and its safety reversing work the way they’re supposed to. If the repair needs more than a board swap, we measure, quote, and schedule it, and you’ll get a written price before anything starts.
Call (844) 761-9351 for a free estimate on Elite gate repair in North Las Vegas. A live person answers, you’ll get an upfront price before any work starts, and the 90-Day Done Right Promise comes in writing on every job.
Written by the team at Gatewood Fence & Gate North Las Vegas, serving North Las Vegas and nearby areas.