Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateElite Welding & Fabrication: The North Las Vegas Owner’s Guide
If you have a failed weld, cracked hinge mount, or rusted-through frame on an Elite gate, we repair and fabricate those parts on site in North Las Vegas, usually for $180 to $650 installed depending on what’s involved. Most repairs happen same-day when it’s structural, and we’ll always give you a written price before we strike an arc. One thing we won’t do is pretend a broken weld is a parts swap: welding is the part.
Owners usually find out the hard way. The gate starts dragging at the bottom on a hot afternoon. A hinge pulls loose from the post with a sound you feel before you hear it. Or a weld that held fine through spring starts showing a hairline crack in July, when the metal expands and every weak joint announces itself. In North Las Vegas, our summer heat and the sun loading on the east-facing side of a gate are usually what puts the first crack in place. A weld that passed inspection in April can fail by August.
Which Elite Models This Applies To
Elite builds gates and gate operators across several series, and the fabrication details vary more than most owners expect. Swing gate frames, cantilever gates, and the mounting brackets for the operator arm each have their own steel gauge and hinge-post conventions. We need the model label, usually riveted inside the operator housing or stamped on the gate frame near the hinge side, plus a few on-site measurements: post diameter, hinge spacing, and frame wall thickness. Those five numbers tell us whether the gate takes a standard fabricated hinge bracket or a reinforced one.
On the OEM-versus-aftermarket question, our honest answer: for structural welds and fabricated hinge plates, we don’t use either. We fabricate the piece to match what’s on your gate and weld it in place. For hardware that bolts on (hinge pins, brackets, latch posts), we source OEM-spec replacements, and we don’t carry parts on a truck, so we order them against your model number. We are an independent service provider in North Las Vegas, not affiliated with Elite, which means we can pick the right part for your gate without being locked into one catalog. If a quality aftermarket bracket fits better and costs less, we’ll say so.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your Elite Welding & Fabrication Is Failing
Welds and frames rarely fail without warning. Here’s what we look for, and what it usually means.
- A hairline crack at a hinge or corner weld. Thermal expansion has pulled a previously sound joint apart. Left alone, the crack grows every hot day until the post pulls free.
- The gate sags on the hinge side. The hinge post weld or the mounting plate is giving way, not the middle of the gate. Fix the panel without addressing the post and you’ll fix it twice.
- Rust streaks running from a weld seam. Our desert heat is one thing, but monsoon humidity and irrigation overspray do the rest. Surface rust around a weld means moisture has gotten inside the joint.
- A grinding or popping sound when the gate moves. Metal-on-metal contact where a weld has shifted or a bracket has cracked. The gate is now flexing, and flexing accelerates failure.
- The gate won’t sit square in the opening, even after hinge adjustment. The frame itself has warped or a fabricated joint has pulled. No amount of hinge tweaking fixes a bent frame.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what fabrication and weld repair typically runs in North Las Vegas. These are installed prices, parts and labor together, so there’s no surprise line item when the job is done.
- Hinge or corner weld repair: $180 to $340
- Hinge post reinforcement or re-weld: $250 to $450
- Fabricated bracket or mount, custom-fit: $300 to $550
- Frame section fabrication and replacement: $450 to $650
What drives the range is how much has to come apart before we can weld it right. A clean crack in an accessible spot is quick. A hinge post that’s rusted through and buried in caliche takes longer. Every price is quoted and agreed before any work starts, and every job carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings us back.
DIY or Call Us?
There’s a lot you can safely check yourself. Walk the gate and look for cracks at every weld point. Push on the hinge side and watch for movement at the post. Snap photos of the model label and any damage. That’s all useful information to have when you call.
What you shouldn’t do is weld or cut structural steel on a standing gate. A gate that’s welded while under tension can release suddenly, and the hinge post carries real load. Improper welds fail without warning, and a gate that drops can injure someone. We weld on site so the gate stays in your driveway, but that work is for someone who knows the load path and the metal. If you’re not sure, that’s exactly the call to make. We can be there the same day for structural repairs in North Las Vegas.
FAQs
How long should an Elite gate weld last in North Las Vegas? A proper weld on a well-prepped joint will hold ten years or more, even in our heat, as long as the steel is clean and the gate isn’t overloaded. Most failures we see are on welds that were rushed or done over rust, not on the steel itself.
Can a cracked weld be repaired instead of replacing the whole part? Usually yes, and that’s how we prefer to work. A hairline crack or a pulled hinge bracket is a repair, not a replacement. We’ll only fabricate a new frame section when the existing metal is too far gone to weld safely.
How long does the repair take? Most weld repairs are done in a single visit. A pulled hinge bracket or a cracked corner weld is often a couple of hours. Frame fabrication takes longer and we’ll tell you the window up front.
How do you source the part? We order OEM-spec hardware against your Elite model number and fabricate structural pieces on site to match what’s on your gate. We don’t carry parts on a truck, so we confirm the right fit before we schedule the work. Call (844) 761-9351 for a free estimate.
If your Elite gate has a crack, a sag, or a weld that’s given up, call (844) 761-9351. A live person answers around the clock, the estimate is free, and pricing is agreed before we start. We also service LiftMaster, Mighty Mule, and Ghost Controls alongside Elite.
Written by the team at Gatewood Fence & Gate North Las Vegas, serving North Las Vegas and nearby areas.