Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Installation in North Las Vegas: What to Know First
Ghost Controls gate openers are solar-friendly and homeowner-installable, which is exactly why so many North Las Vegas driveways have one mounted to a gate that was never built to carry it. A proper Ghost Controls gate installation in North Las Vegas runs $1,450 to $5,800 depending on gate type, power source and whether the post needs work, and a straightforward driveway gate is usually a one-day job once parts are in hand. We quote the price in writing before anything starts, and the number on that quote is the number on your invoice.
This page is for the homeowner in North Las Vegas who already owns the opener, or is about to buy one, and wants a gate under it that swings true for years instead of months. Call (844) 761-9351 and a live person picks up.
How Ghost Controls Products Fail – and How We Fix Them
Ghost Controls builds a decent opener for the money. The trouble we see in North Las Vegas almost never starts inside the control box. It starts in the gate, the post or the mounting, and the opener gets blamed. Here are the five we run into most.
- The H-series and light-duty arms on a gate that’s too heavy. Ghost Controls residential arms are rated for gates up to roughly 12 feet and a few hundred pounds. We regularly find a 14-foot cedar or steel gate hanging off one, and the arm strains, slows and eventually quits. The fix isn’t a bigger opener first; it’s getting the gate’s weight and swing resistance back where the arm was designed to push it. If it stays heavy, we’re honest about it and talk through a different opener.
- Post flex and hinge sag on double swing gates. A ghost Controls single-arm kit installed on a sagging double gate will drag within a season. The sag lives in the hinge post, not the middle of the gate, and that’s where we start. We brace or reset the post, re-hang the hinges, then re-mount the arm to the corrected geometry.
- Solar panel and battery failures in full summer sun. North Las Vegas summers cook a solar panel’s wiring and cook the sealed battery faster than the manufacturer’s own chart suggests. A unit that “works all winter and dies every July” is usually a tired battery plus a panel pointed wrong. We test the charge curve before we sell you anything.
- Mounting-bracket loosening on stucco and block piers. Our soil moves, and a bracket anchored into a hollow block pier with the wrong fastener loosens and lets the arm walk. We re-anchor to solid material, add backing where needed, and torque to spec.
- Limit and sensitivity settings that fight the gate. The opener gets blamed for reversing or stopping short when it’s actually set too tight for the gate’s real weight. A proper re-set of the limits and force on a corrected gate solves symptoms that look like a dead motor.
We’re an independent Ghost Controls service provider and not affiliated with or authorized by the manufacturer. That means we tell you what the gate actually needs, not what a sales sheet wants to sell.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Ghost Controls Gate Installation Process
Here’s how a Ghost Controls job runs from the first call to the last sweep of the driveway.
- 1
Diagnostics at the gate. We measure the gate, check the swing, test the post and hinges, and look at the power source before we quote a thing. If the gate is the real problem, we say so.
- 2
Parts decision. We use OEM Ghost Controls parts when they make sense and a quality aftermarket part when it’s the better value, and we tell you which is which. Warranty-safe practices come first on a unit still under coverage.
- 3
The install or correction. Bracket, arm, power run and safety edges set to the gate’s real geometry. On-site welding when the post or frame needs it so the gate stays in your driveway.
- 4
The test. We run the gate through full open and close cycles, check the force and limits, and confirm the safety reverse actually reverses.
- 5
The written guarantee. Your 90-Day Done Right Promise is stamped on the job, not buried in fine print. One call brings us back.
- 6
Cleanup. We leave the driveway the way we found it, minus the problem.
See the difference
Before
After
Before
After
Before
AfterWhat Ghost Controls Gate Installation Costs in North Las Vegas
Here are the ranges we see on real North Las Vegas jobs. Every price is quoted and agreed before work starts.
| Job | Typical range |
|---|---|
| Ghost Controls single swing driveway gate, opener you already own | $1,450 – $2,600 |
| Double swing gate with dual arms | $2,400 – $3,900 |
| Sliding gate with Ghost Controls operator | $2,200 – $4,200 |
| Pedestrian or security gate install | $1,100 – $2,100 |
| Post reset, brace or on-site weld | $250 – $800 |
| Solar panel and battery setup | $180 – $420 |
What moves the price: gate weight and width, how much post work is needed, whether power has to be run, photosensors and safety edges, and gate material. Old offers apply too: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (844) 761-9351 for a free estimate.
Why North Las Vegas Homeowners Call Gatewood Fence & Gate North Las Vegas for Ghost Controls Work
We’ve been doing gate work in the North Las Vegas area since 2001, locally owned and owner-operated, with a published address and license number anyone can look up. Our technicians have up to 25 years of experience, and they know Ghost Controls units and the gates they get bolted to. Every job carries the 90-Day Done Right Promise in writing. Calls are answered by a live person 24 hours a day, 7 days a week. We’re also certified to service LiftMaster, Mighty Mule and DoorKing, plus FAAC, BFT, Linear, Viking and Elite, so if a Ghost Controls unit truly isn’t the right fit we can tell you straight and quote a real alternative. We repair first and replace last. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
FAQs
It can. Manufacturer warranty terms depend on correct installation and settings, and homeowners often lose coverage on a unit that was mounted on an out-of-spec gate. We use warranty-safe practices on a unit still under coverage so you keep what you paid for.
We source OEM Ghost Controls parts and quality aftermarket equivalents, and we tell you which we’re using and why. Most parts for common units are on hand or come in within a normal turnaround.
Repair first, almost always. We fix the gate, post and mounting that actually caused the problem and service the opener where it’s sound. We only recommend a new unit when the diagnosis really points there. A free second opinion on any written estimate is always available.
Installation is scheduled, not same-day dispatch. We measure, order parts and book a window that fits your gate. Calls are answered by a live person any hour, so you’ll get a real timeline when you call.
Yes. Ghost Controls units go on driveway gates, pedestrian gates, sliding gates and security gates, and we install and correct all of them in North Las Vegas. Call (844) 761-9351 for a free estimate; the number quoted is the number you pay.
Whether your opener is still in the box or bolted to a gate that’s misbehaving, call Gatewood Fence & Gate North Las Vegas at (844) 761-9351 for a free estimate. A live person answers, we quote before we start, and the 90-Day Done Right Promise backs every job in writing.
Written by the team at Gatewood Fence & Gate North Las Vegas, serving North Las Vegas and nearby areas.