A Gatewood company - serving North Las Vegas, NV

Ghost Controls Gate Motor Replacement in North Las Vegas, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Gate Motor Replacement: The North Las Vegas Owner’s Guide

We replace Ghost Controls gate motors in North Las Vegas, and most jobs run about $650 to $1,200 installed depending on the model, the gate’s weight, and whether the operator is a single or dual swing unit. We can often get to a dead operator the same day. We are an independent service provider, not affiliated with Ghost Controls.

Call (844) 761-9351

Owners usually find out the hard way. The gate stops halfway up the driveway, the remote clicks and nothing moves, or the arm starts groaning every time the wind picks up off the desert. In North Las Vegas, where summer afternoons hit 110 and the sun bakes a motor housing day after day, heat is the quiet killer. We’ll get to what fails first, which replacement fits your model, and what it costs before we start.

Which Ghost Controls Models This Applies To

Ghost Controls builds around two families: single swing and dual swing. The TSS1 and similar single operators drive one gate leaf; the DTP1, DTP2, and their kin drive two. The housing shape, the control board layout, and the arm throw all differ between them, and the throw is the number that bites people. Put a motor with the wrong throw on a wide gate and it’ll stall at the far end of travel before it ever thinks about failing.

The fastest way to get the right part is to read the label on the underside of the motor housing, not the remote, and note the model plus the arm length in inches. Measure the gate leaf too. We match a replacement to your A, B, and single-digit letter series board so the limit switches and the accessory plugs line up.

OEM versus aftermarket: for Ghost Controls, we lean OEM on the control board and the drive arm. The aftermarket arms we’ve pulled off gates in North Las Vegas often run a slightly different gear tooth profile, and they wear against the original gear like a mismatched pair of shoes. On a plain replacement remote or a set of limits, a quality equivalent does fine.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your Ghost Controls Gate Motor Replacement Is Failing

Here’s what we actually see when we open the housing in North Las Vegas:

  • The gate stalls or reverses mid-travel. That’s usually the control board losing its limit reference, or a worn drive gear slipping under load. When the board can’t find the end of travel, it does the safe thing and backs off.
  • The arm groans and the gate drags. The gear inside the operator has worn down, or the gate hinge has sagged so the motor is fighting weight it was never sized for. A motor working twice as hard runs hot, and in our heat it doesn’t run long.
  • The remote clicks but nothing moves. Often a dead motor winding or a blown board, not the remote. We check the board before we ever quote a motor.
  • The motor hums but the gate doesn’t budge. A seized arm or a stripped gear. That hum is the motor trying to turn something that won’t.
  • Repeated breaker trips or a board that resets on its own. Water intrusion or heat-damaged capacitors on the board. Our monsoon storms and the dust that rides in with them find every weak seal.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A straight motor swap for a single swing Ghost Controls operator in North Las Vegas typically lands between $650 and $950 installed. Dual swing setups and heavier gates run $900 to $1,200. The part itself is most of the cost; labor covers the removal, wiring, limit-setting, and a full test cycle.

Line item Typical range
Replacement motor/operator unit $380 – $650
Removal, install, wiring, limits $220 – $450
Extra safety edge or accessory wiring $60 – $150

We quote the price and agree on it before any work starts. No surprises at the door. Every motor replacement carries our 90-Day Done Right Promise in writing, and if it’s not right we come back. Repair runs over $200 get $40 off, and there’s no trip charge inside the county.

DIY or Call Us?

You can safely check some things yourself. Read the label, look for a reset button, test a fresh battery in the remote, and clear debris from the gate track. That’s the honest boundary. Beyond it, the operator is a 120-volt electrical device with a motor that will grab, and the board and wiring carry enough current to hurt you. We don’t hand out step-by-step instructions for pulling the housing and swapping the motor because that’s the part where people get hurt or fry a board worth more than the install.

If you’re in North Las Vegas and the gate’s dead, call us at (844) 761-9351. We’ll tell you straight whether it’s a motor or something cheaper.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (844) 761-9351
Local Service Coverage

Request a Free Estimate in North Las Vegas

Tell us what you need - Gatewood Fence & Gate North Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch