A Gatewood company - serving North Las Vegas, NV

Ghost Controls Hinge & Roller Replacement in North Las Vegas, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Hinge & Roller Replacement: The North Las Vegas Owner’s Guide

We replace failed Ghost Controls gate hinges and rollers with compatible parts, and a typical installed job in North Las Vegas runs $145 to $320 depending on how many hinges and rollers your gate uses and whether the hinge post needs welding. Same-day repair is often possible when you call early. Most owners here don’t discover this part has failed until the gate starts dragging on the driveway, hangs at an angle when it’s open, or the opener begins straining and stalling partway through a cycle. By the time the motor complains, the hinge has usually been worn for months. Our technicians have up to 25 years of experience, and we’re certified to service Ghost Controls along with LiftMaster, Mighty Mule, and DoorKing.

Call (844) 761-9351

Why hinges and rollers wear faster in the desert

North Las Vegas gates live in blowing grit, 110-degree summers, and hard temperature swings between afternoon and night. Dust works into hinge pins and roller races and turns into an abrasive paste, then the monsoon arrives and pushes it deeper. That’s a big part of why we see hinge and roller wear here earlier than owners expect.

Key Takeaways

  • Installed Ghost Controls hinge and roller replacement in North Las Vegas typically runs $145-$320.
  • Same-day repair is often available; call early in the day.
  • We identify your exact Ghost Controls model before quoting, because the parts aren’t universal across the line.
  • Worn hinges stress the opener motor. Fixing the hinge early protects the operator.

Which Ghost Controls Models This Applies To

Ghost Controls builds a lot of its residential line on a shared tube-and-frame platform, and many hinge and roller components cross between models. But not all of them. Before we quote anything, we read the model and serial sticker, usually inside the control box cover or on the rear frame member, and match the part to that model rather than to a photo the owner texted us. A gate that looks identical from the street can carry different hinges.

Ghost Controls uses a mix of bolt-on hinge brackets and welded or bolted roller assemblies, and the exact tube diameter and hinge-pin spacing vary by series. That’s the compatibility gotcha most buyers hit online: a generic “fits Ghost Controls” hinge often has the right look and the wrong bolt pattern or pin diameter. It’ll bolt on, then wear out in a season because it never sat flush.

OEM or aftermarket?

For Ghost Controls specifically, OEM hinges and rollers are the safest fit if your model is still supported. When it isn’t, quality aftermarket equivalents do exist, but only if the pin diameter and bracket geometry match. We’ll tell you honestly which way we’d go for your gate. We don’t claim stock of any parts, so we confirm the exact part number with you before we order or install.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your Ghost Controls Hinge & Roller Replacement Is Failing

  • Gate sags when open. A worn hinge pin or an elongated bolt hole lets the gate drop at the hinge post. If it only sags when open, the hinge is the suspect, not the frame.
  • Rollers that flat-spot or bind. Desert grit gets into the roller race and the wheel stops turning cleanly. You’ll hear a scrape or feel a catch as the gate travels.
  • Opener straining or stalling mid-cycle. A dragging hinge forces the motor to fight the gate. The opener is usually the messenger, not the cause.
  • Visible play at the hinge. Grab the gate and rock it. If there’s slop at the pin or bracket, the hinge is worn and it will only get worse.
  • Rust streaks or fresh paint over old wear. Sometimes the last repair was paint over a failing hinge. We see this in North Las Vegas more than you’d think, and it hides the real problem for a season.

Here’s the pattern we’ve learned: a gate sags in the hinge post, not in the middle. That’s where we start, every time. Fix the panel without the post and you’ll fix it twice.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

We quote installed prices, parts and labor together, so you’re not chasing a separate parts invoice. Upfront pricing is agreed before any work starts, and it doesn’t change at the door.

Job Typical installed range
Single hinge replacement $145-$195
Pair of hinges (both posts) $195-$260
Roller set replacement $150-$220
Full hinge and roller refresh, one leaf $240-$320
Hinge post welding if the post is compromised Quoted on site

What drives the range: number of hinges and rollers, model, whether the hinge post needs on-site welding (Hal welds in your driveway, so the gate stays put), and whether the gate is a single swing, double swing, or slide. Every job carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings us back.

DIY or Call Us?

Some checks are safe for an owner. You can rock the gate by hand to feel for hinge play, look for flat spots or binding on the rollers, and look for rust streaks at the hinge brackets. What you shouldn’t do yourself is remove a hinge on a gate that’s already free-standing at load, weld a post, or chase a bolt pattern that doesn’t match. A swinging gate carries real weight, and if a hinge lets go while you’re working under it, that’s a hospital visit, not a repair. That’s the honest line. We’re not going to scare you, but we will tell you plainly: a gate that sags and binds is not a weekend bolt-on.

Call (844) 761-9351 for a free estimate. A live person answers, day or night.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (844) 761-9351
Local Service Coverage

Request a Free Estimate in North Las Vegas

Tell us what you need - Gatewood Fence & Gate North Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch