LiftMaster operators
Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gatesFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateLiftMaster Keypad & Intercom Repair: The North Las Vegas Owner’s Guide
We repair and replace LiftMaster keypads and intercoms in North Las Vegas, and most keypad swaps run $185 to $320 installed, while intercom repairs and replacements typically land between $240 and $520 depending on the model and wiring. In most North Las Vegas cases we can get eyes on the problem the same day you call. You’ll usually know the part has failed before you ever look at it: the code that worked for years suddenly doesn’t, the keypad beeps but the gate never moves, or the intercom crackles and cuts out halfway through a sentence. Sometimes the gate works fine from the remote and refuses the keypad entirely, which tells you the operator is healthy and the problem is at the wall or the pedestal.
Which LiftMaster Models This Applies To
LiftMaster keypads live in a few families, and the model number on the inside of the battery door or the back of the housing is what tells us which one you have. The common residential units are the wireless 877MAX, the wired 878MAX, and older 976LM and 377LM models still running on plenty of North Las Vegas gates. Intercoms are a different animal: the EL25 and EL2000 entry systems pair a keypad with a speaker, microphone and call button, and the failure is often in the audio board rather than the keys.
Here’s the compatibility gotcha that bites people: LiftMaster wireless keypads are programmed to a specific operator’s radio frequency and security protocol, and a keypad built for a Security+ 2.0 operator will not talk to an older Security+ or billion-code receiver no matter how many times you enter the code. The date on the operator’s label matters more than the date on the keypad. We identify the operator first, then match the keypad to it.
On OEM versus aftermarket: genuine LiftMaster parts cost more but drop in with the exact connector and mounting pattern. Quality aftermarket keypads work fine on the simpler wireless models and cost meaningfully less. On the intercom and entry systems, we steer toward OEM because the audio and call-board wiring is fussier and aftermarket substitutes cause call-button ghosting. We’re an independent service provider, not affiliated with LiftMaster, so we have no reason to push one over the other except what actually holds up.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your LiftMaster Keypad & Intercom Repair Is Failing
- The code stops working but the remote still opens the gate. The operator and receiver are fine; the keypad’s memory or keypad-to-operator programming has dropped, usually from a power surge or a dying battery in the wireless unit.
- Keys beep or light up but nothing happens at the gate. The keypad is getting power but not transmitting a signal the operator recognizes. Could be a dead transmitter, a mis-set frequency, or a wiring fault on a wired model.
- The intercom crackles, cuts out, or the visitor can’t hear you. That’s the audio board or a corroded connection at the pedestal. North Las Vegas dust and summer heat cook the speaker cone and the board’s solder joints over time.
- The call button does nothing or rings constantly. A stuck or shorted button, or a failed relay on the entry board. Ghost ringing is almost always a moisture or dust bridge across the contacts.
- The keypad housing is cracked, sun-bleached, or the buttons feel mushy. Nevada sun and 100-plus-degree summers degrade the plastic and the membrane. Once the buttons stop clicking, the switch contacts underneath are on borrowed time.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing in North Las Vegas breaks down roughly like this. A standard wireless LiftMaster keypad replacement is $185 to $260. A wired keypad or keypad-plus-receiver job runs $230 to $320. Intercom repair (audio board, speaker, call button) is $240 to $380, and a full intercom or entry-system replacement is $380 to $520 and up on multi-unit systems. What drives the range: whether we’re matching an older operator protocol, whether the pedestal wiring needs repair, and whether the housing has to be re-mounted.
That price includes the part, the labor, the programming, and testing the gate through several open and close cycles before we leave. We quote it and agree on it before any work starts, and it doesn’t change at the door. Every job carries our 90-Day Done Right Promise in writing. Repairs over $200 get $40 off, and there’s no trip charge inside the county.
DIY or Call Us?
You can safely do a few things. Check the keypad battery if it’s wireless, confirm the operator has power and the remote still works, and look at the wiring at the pedestal for anything visibly chewed, corroded or loose. That narrows it down without any risk.
Where DIY goes wrong on this part: people buy a keypad online that doesn’t match their operator’s protocol and spend an afternoon re-entering codes that will never take. On intercom and entry systems there’s low-voltage wiring sharing a pedestal with the gate operator, and poking around in there without knowing which conductor is which can damage the entry board or the operator. If the code won’t program or the intercom is dead, the fastest path is a call. Dial (844) 761-9351 and we’ll get a live person on the line and a real diagnosis in front of you. We also service Mighty Mule, Ghost Controls and DoorKing if you’ve got a mixed setup.
FAQs
A wireless keypad typically runs five to eight years here, and an intercom or entry system runs eight to twelve, but North Las Vegas heat and dust shorten both. Afternoon sun on a west-facing pedestal bakes the housing and the electronics, and we see keypads fail years earlier on gates that sit in full sun all day than on shaded ones. A cracked housing or mush buttons are your cue that it’s close.
Often yes. A keypad that stopped accepting codes usually just needs reprogramming or a battery, not a new unit. Intercom audio problems are frequently a speaker, a corroded connector, or a solder joint we can fix on site. We repair first and only recommend a replacement when the board or the housing is genuinely gone. Call (844) 761-9351 for a free second opinion on any written estimate you’ve been handed.
A keypad replacement is typically 30 to 45 minutes, and an intercom repair or replacement usually runs one to two hours depending on wiring and whether the pedestal needs work. We test the gate through several cycles before we pack up, so you see it working rather than taking our word for it.
We identify your operator’s model and radio protocol first, then order the keypad or intercom built for it, so the connector, frequency and mounting all match. That single step is why the job works the first time instead of the third. To get that started, call (844) 761-9351 for a free estimate.
If your LiftMaster keypad or intercom has quit in North Las Vegas, call (844) 761-9351 for a free estimate. A live person answers around the clock, we quote and agree on the price before any work begins, and every job carries the 90-Day Done Right Promise in writing. If you’d rather look us in the eye, the shop is down the road.
Written by the team at Gatewood Fence & Gate North Las Vegas, serving North Las Vegas and nearby areas.