Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateLinear Gate Parts & Welding in North Las Vegas: What to Know First
We provide independent Linear gate parts and welding in North Las Vegas, and most Linear swing and slide jobs we see are repaired within a single visit. We quote the full price before we touch anything, and it doesn’t move at the door. We’re not affiliated with or authorized by Linear; we’re an independent shop that works on their products because we’ve taken a lot of them apart. If your gate is sticking, sagging, or the post is pulling out of North Las Vegas caliche, call us at (844) 761-9351 and a live person will pick up.
How Linear Products Fail – and How We Fix Them
Linear builds solid residential gate operators, but the gates around them take the beating. These are the Linear-specific problems we see walking up driveways across North Las Vegas.
- LSO-series and LMT slide operators dragging on the rail. On Linear’s slide units, a worn chain or stretched drive causes the carriage to ride uneven, and the operator gets blamed for a bad gate track. We check the track and the gate wheel load before we sell anyone a motor.
- HG-series swing arms cracking at the hinge bracket. The arm bracket takes the full swing weight, and when the gate sags the bracket starts to tear. We weld that bracket back on site rather than swap the operator.
- Hinge posts pulling loose from North Las Vegas soil. Our ground is a lot of caliche and hard-packed dirt, and a post set shallow in it will walk over a couple of years. We re-set the post in concrete at the right depth, then re-hang the gate square.
- Rusted rail and frame sections on older Linear-ready gates. Desert heat and irrigation overspray take the finish off fast. We cut out the rusted section and weld in matching steel, then coat it so it doesn’t happen again next season.
- Latches and locks that no longer line up. When the gate sags even a quarter inch, the latch stops catching. We true the gate first, then adjust or replace the latch and lock so the operator’s close actually latches.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Linear Gate Parts & Welding Process
Every Linear job follows the same order. It’s not fancy, but it’s why the repair holds.
- 1
Look, then quote. We pull up and find the actual failure point before we talk price. On most Linear gates the operator is fine and the gate or post is the problem.
- 2
Decide OEM vs. aftermarket out loud. Some Linear parts need the OEM piece to stay right; some are fine with quality aftermarket. We tell you which and why, and you pick.
- 3
Weld and repair in place. The gate stays in your driveway. We weld on site, replace the hinge, true the post, or rebuild the rail rather than haul the whole gate off.
- 4
Test the whole cycle. Open, close, latch, safety reverse. We run it several times and watch where it’s tight.
- 5
Stamp the promise. Every job gets the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back.
- 6
Clean up. Grind dust, weld spatter, old parts gone. The gate looks like we were never there.
See the difference
Before
After
Before
After
Before
AfterWhat Linear Gate Parts & Welding Costs in North Las Vegas
Here’s the honest range for the Linear work we do most in North Las Vegas. These are real starting points, not a phone quote that changes when we show up.
| Job | Typical range |
|---|---|
| Hinge replacement (per hinge, on-site weld) | $95 – $180 |
| Hinge post replacement, re-set in concrete | $285 – $550 |
| Rail or frame section repair (cut and weld) | $180 – $420 |
| Gate roller replacement | $75 – $160 |
| Latch and lock adjustment or replacement | $85 – $200 |
| Custom welding, per linear foot of repair | $65 – $120 |
What moves the price: post depth and soil, how much rust we find once we open it up, and whether the part is OEM or aftermarket. The quote is agreed and in writing before any work starts. Estimates are free, and we offer $40 off any repair over $200, no trip charge inside the county, and 10% off for seniors and veterans. Call (844) 761-9351 for an exact number.
Why North Las Vegas Homeowners Call Gatewood Fence & Gate North Las Vegas for Linear Work
The name is on the shop and the shop is down the road, which is the oldest accountability there is. We’ve been locally owned and owner-operated since 2001, so you’re not calling a national outfit that quotes one price and charges another. A live person answers around the clock, not a voicemail. We work on nine major brands, including LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so if your gate turns out to be a different operator we can still fix it. Our technicians have up to 25 years of experience and they’re background-checked and uniformed. And every Linear repair carries the 90-Day Done Right Promise, stated plainly, in writing.
FAQs
It depends on the part and who made it. On Linear operator components still under manufacturer warranty, we use the OEM part so the coverage stays intact. On gate hardware and welding there’s no manufacturer warranty to protect, so quality aftermarket is often the better buy. We’ll tell you which is which before we order. Call (844) 761-9351 for a free second opinion on any written estimate.
Yes. We source OEM Linear parts for the operator and the hardware around it, and we carry quality aftermarket replacements when they’re the smarter call. For most common Linear swing and slide parts we can order the same day. Your estimate includes which part we’re using and why.
Repair almost always, if the operator and gate are sound. A hinge, post, or rail that’s failed is a weld-and-fix job, not a replacement. We only suggest replacing when the gate frame is rusted through or the post can’t be re-set. We’ll show you what we’re looking at before we recommend anything.
We do same-day and 24/7 emergency availability, so call and we’ll give you a real window. For standard parts some repairs are handled the same visit; custom welding or special-order parts may need a scheduled return. Either way, the price is agreed up front.
Yes. On-site welding means the gate stays in your driveway and we weld the hinge bracket, rail, or post right where it failed. That way we fix the panel and the frame together, because a panel fix without the post just brings you back next season.
Written by the team at Gatewood Fence & Gate North Las Vegas, serving North Las Vegas and nearby areas.