A Gatewood company - serving North Las Vegas, NV

Mighty Mule Gate Repair Service in North Las Vegas, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Why North Las Vegas Homeowners Choose Mighty Mule Gate Repair

We repair Mighty Mule gates in North Las Vegas as an independent service provider, and what sets our Mighty Mule work apart is that we diagnose the actual fault – battery, control board, limit switch or arm – before quoting a single part. Mighty Mule operators are common on North Las Vegas rear-yard and driveway gates, and most of them are not dead; they’re sagging on a tired battery or a limit that walked out of adjustment after the slab settled. We tell you which one it is.

Call (844) 761-9351

To be clear: we are not affiliated with, authorized by, or endorsed by Mighty Mule or its manufacturer. We’re independent gate specialists who happen to work on Mighty Mule operators every week, alongside eight other major brands.

North Las Vegas gets a specific kind of Mighty Mule failure. The 2000s build-out of Aliante and Eldorado left thousands of homes with original builder-grade gates, and the operators on those gates are now hitting the same wall at the same time. Afternoon sun bakes control boxes. Monsoon power events finish off tired boards. Dry windblown dust wears hinge pins and jams tracks. That’s the workload here, and it’s what we know.

Why Trust Gatewood Fence & Gate North Las Vegas for Your Mighty Mule Gate Repair?

Our technicians have up to 25 years of experience, and that experience includes the whole Mighty Mule line – the MM360/MM362 swing openers, the FM700/FM702 single-swing series, the MM572W/MM572 slide units, and the MM560/MM562 heavy-duty dual-swing systems. We know how each one fails differently, which matters because a slide operator’s symptoms are not a swing operator’s symptoms.

We fit genuine Mighty Mule parts where a direct OEM match exists – control boards, operator arms, limit switches. Where a proven aftermarket 12V battery or hardware piece genuinely outperforms or outlasts the OEM version, we’ll say so instead of upselling you into a part that fails faster. That’s warranty-safe practice, not guesswork.

Every Mighty Mule job we do carries the 90-Day Done Right Promise in writing. If something we touched isn’t right, one call brings us back. The name is on the shop and the license number is published, so you can verify who you’re dealing with before you ever pick up the phone. Calls are answered by a live person, 24/7, not a voicemail and not a queue three states away. We also stand behind upfront pricing: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Common Mighty Mule Gate Repair Problems We Fix in North Las Vegas

  • Control-board failure after monsoon voltage spikes. North Las Vegas summer storms send surges through the line, and Mighty Mule boards take the hit. The gate stops mid-travel, limit settings reset to nothing, or the board goes completely dead with no LED activity at all. A dead board with zero lights is a board problem, not a battery problem – that distinction saves you money.
  • Battery and solar-charge faults. The sealed 12V batteries in solar Mighty Mule setups sulfate fast in desert heat. The symptom is a gate that opens once and stalls, or beeps low-battery even in full sun. The panel is fine; the battery has aged out.
  • Operator arm and actuator wear. On MM360 and FM700 arms, years of duty shear pins, bend arms and strip gears. You feel it as binding, jerking, or a gate that reverses on contact before it ever reaches the limit.
  • Limit-switch and calibration drift. Open and close limits walk out of adjustment on uneven or settling driveway slabs, common on older North Las Vegas tract homes. The gate over-travels, slams shut, or stops short of the post.
  • HOA style and sun-exposure failures in Aliante. In Aliante and similar HOAs, replacement operators and arms have to match the community’s uniform style and color. We also regularly see operators fail after only a few years there because the control box sits in direct afternoon sun with no shade.

A typical Mighty Mule swing-gate call starts with a gate that opens partway and stops, or beeps and refuses to move – often an MM360 or FM700 with a tired 12V battery or a limit switch that drifted after the slab settled. A qualified tech checks battery voltage under load, verifies the control board’s LED fault codes, resets the open and close limits, then inspects arm pins and hinges for binding before clearing the fault. When the board is truly dead, the fix is a matched replacement board and a fresh battery, not guesswork.

Mighty Mule Parts & Our Repair-vs-Replace Approach

Mighty Mule parts come in two flavors: genuine OEM and aftermarket. We don’t pretend one is always better. For control boards and operator arms, we fit genuine Mighty Mule parts where a direct match exists, because a mismatched board on an MM360 or an ill-fitting arm on an FM700 causes more problems than it solves. For 12V batteries, limit switches and hardware, a proven aftermarket part often outlasts the OEM version – especially batteries, where heat tolerance is what actually matters in North Las Vegas.

We source parts for each job individually; we don’t claim a local stockpile. When we assess your gate, we tell you honestly whether a board-level repair makes sense or whether a unit that’s lost both board and arm is better replaced. If the math favors replacement, we’ll lay it out plainly rather than patch a failing operator and charge you twice.

Call (844) 761-9351 and we’ll talk through what your Mighty Mule is doing – the symptoms usually point to the part before we even arrive.

Our Mighty Mule Service Process – Step by Step

  1. 1
    Diagnosis. We check battery voltage under load first, because a sagging battery mimics a dead board. Then we read the control board’s LED fault codes, verify limit-switch settings, and test the operator arm for binding or pin shear. On solar setups we check the charge circuit too.
  2. 2
    Repair or install. Once we know the real fault, we quote it upfront and get your agreement before any work starts – no surprise invoice at the door. OEM board and arm where a direct match exists, proven aftermarket battery and hardware where it performs better. We weld on site when the gate frame or hinge post needs it, so the gate stays in your driveway.
  3. 3
    Test. We cycle the gate through full open and close, confirm limits are set correctly, check the safety reverse on contact, and verify the battery holds charge under load – not just at rest.
  4. 4
    Warranty. Every job carries the 90-Day Done Right Promise in writing. If the fault returns in that window, one call brings us back.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Mighty Mule Products We Service & Install in North Las Vegas

We work on the Mighty Mule lines North Las Vegas homeowners actually have: the MM360 and MM362 swing gate opener series; the FM700 and FM702 single-swing openers; the MM572W and MM572 slide gate opener series; and the MM560/MM562 heavy-duty dual-swing systems. That covers automatic gate repair, battery backup and solar-charge service, and motor and arm repair across all of them. If you’re adding access control to a Mighty Mule operator, we handle keypads, intercoms and card readers that are compatible with the board you have – some Mighty Mule boards accept them more cleanly than others, and we’ll tell you which before you buy anything.

We Also Service These Brands

Mighty Mule is one of nine major brands we service. We also repair LiftMaster, Ghost Controls and DoorKing operators across North Las Vegas, plus FAAC, BFT, Linear, Viking and Elite. That range means we’re not pushing one brand because it’s the only one we know. We’ll tell you what your gate actually needs, whichever brand is bolted to it.

FAQs – Mighty Mule Gate Repair Service in North Las Vegas

Book Your Mighty Mule Service in North Las Vegas, NV

If your Mighty Mule gate is beeping, stalling, slamming or dead, call Gatewood Fence & Gate North Las Vegas at (844) 761-9351. A live person answers around the clock, and we’ll diagnose the real fault before quoting a part. Free second opinion on any written estimate, no trip charge inside the county.

Written by the team at Gatewood Fence & Gate North Las Vegas.

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (844) 761-9351
Local Service Coverage

Request a Free Estimate in North Las Vegas

Tell us what you need - Gatewood Fence & Gate North Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch