Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateViking Gate Parts & Welding in North Las Vegas: What to Know First
We’re an independent Viking service provider for gate parts and welding in North Las Vegas, and most Viking repairs we see are done in a single visit once the right part is in hand. Typical jobs run from a hinge post re-weld to a full latch and roller rebuild, and on anything that needs a measured custom part we schedule the work rather than rush it. The price you’re quoted is the price you pay: we walk the gate with you, write the number down, and agree on it before anyone touches a wrench. Call (844) 761-9351 and a live person answers, day or night.
This page is for the homeowner in North Las Vegas who owns a Viking gate or operator, has watched it sag, drag, or stop latching, and wants a straight answer instead of a sales pitch. We’re not affiliated with Viking, and we won’t pretend to be – we’re just the crew that knows these gates best because we’ve repaired so many of them around here.
How Viking Products Fail – and How We Fix Them
Viking builds solid gates and operators, but every brand fails in its own way, and Viking is no exception. Here’s what we actually see on Viking jobs across North Las Vegas, and what the fix looks like:
- Hinge-post sag on Swing Gate frames. A Viking swing gate almost never sags in the middle – it sags at the hinge post, where the weld or the anchor has given. That post takes the whole weight of the leaf every time it swings. We weld the post back to true and shim the hinge to square, on site, instead of hauling the gate off.
- Corrosion pitting on the bottom rail. North Las Vegas heat and the hard swing from cool nights to hot days work steel over the years, and the bottom rail is where moisture collects and rust starts. Left alone, the pitting eats through the wall of the tube. We cut out the bad section and weld in a matching rail so the gate keeps its line and its strength.
- Worn gate rollers on sliding lines. Viking sliding gates ride on rollers that flatten and seize as grit works its way in – desert dust is relentless here. A seized roller drags the whole leaf and forces the operator to work harder than it should. We replace the rollers and true the track so the gate glides instead of grinding.
- Latch and lock wear on the entry leaf. The latch on a Viking pedestrian gate takes a beating, and the striker wears down until it won’t catch reliably. Factory-matched hardware and quality aftermarket both work here; we’ll tell you which is worth the money and which is just paying for a name.
- Operator-mount fatigue on the automation. Viking operators mounted to a tired bracket start misaligning, and the gate begins to close on its own or stall partway. We check the mount and the arm as part of every parts job, because a new part bolted to a bad bracket just fails again. (This is operator work, so it may not be same-day – see the pricing section.)
Fix the rail without the post and you’ll fix it twice. That’s why every Viking job starts at the structure, not at the symptom.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Viking Gate Parts & Welding Process
Here’s what an actual Viking job looks like from the first call to the final cleanup:
- 1
You call, a live person answers. No voicemail, no queue. We ask what the gate is doing and get a picture of the job before anyone gets in a truck.
- 2
We come out and look. Show us the gate closing on its own and we’ll show you where it’s failing. Diagnosis happens on your driveway, in front of you.
- 3
Parts decision, in plain English. OEM or quality aftermarket, what it costs, and why. We don’t swap parts that don’t need swapping, and we don’t upsell a replacement when a weld and a hinge will do.
- 4
On-site welding and repair. The gate stays in your driveway. We weld, true, and reassemble right where it lives.
- 5
The test. We cycle the gate, check the latch, the swing, and the rollers, and walk it with you before we call it done.
- 6
The 90-Day Done Right Promise, in writing. If it’s not right, one call brings us back. No runaround.
See the difference
Before
After
Before
After
Before
AfterWhat Viking Gate Parts & Welding Costs in North Las Vegas
Here are real ranges for the Viking work we do around North Las Vegas. Your written estimate is the number that matters, and we agree on it before any work starts – no surprises at the door.
| Viking Job | Typical Range |
|---|---|
| Hinge replacement / hinge-post re-weld | $180 – $340 |
| Rail repair and section weld | $220 – $480 |
| Gate roller replacement (sliding) | $150 – $300 |
| Latch and lock hardware swap | $120 – $260 |
| Custom welding (bracket, mount, frame) | $200 – $550 |
What moves the price: the size and weight of the leaf, how much corrosion we have to cut out, and whether a custom bracket has to be measured and ordered – that last one means a scheduled visit, not a same-day fix. Want a firm number? Call (844) 761-9351 and we’ll come measure it. Estimates are free, there’s no trip charge inside the county, and you get $40 off any repair over $200.
Why North Las Vegas Homeowners Call Gatewood Fence & Gate North Las Vegas for Viking Work
We’ve been locally owned and owner-operated since 2001, and the name is on the shop down the road – that’s the oldest accountability there is. Every job, Viking or otherwise, carries our 90-Day Done Right Promise in writing, and a live person answers the phone around the clock. Our technicians have up to 25 years of experience and know Viking gates the way you know your own driveway. When we’re not on Viking work, we’re certified on LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so if your property runs more than one gate we can look at all of them in one visit. Seniors and veterans get a permanent 10% discount, and if you’ve already got a written estimate from someone else, we’ll give you a free second opinion on it.
FAQs
It depends on the part and what we replace. As an independent service provider, we don’t claim Viking authorization, so we’re careful to use OEM parts where the warranty depends on it – your written estimate tells you which parts we’re using and why. When in doubt on a newer gate, tell us at the call and we’ll lean OEM. Call (844) 761-9351 for a free estimate.
We handle common Viking parts directly and order what needs measuring or matching, which is where a scheduled visit beats a rush job. We’ll tell you up front which category your repair falls into. Call (844) 761-9351 to find out.
Almost always, yes – we repair first and replace only when the metal itself is too far gone. Show us the gate and we’ll give you the honest call between a weld-and-hinge fix and a new leaf. Your written quote comes before any work, so you decide with the number in front of you.
Most Viking parts and welding repairs are handled in a single visit once the right part is in hand, and we answer the phone 24/7 so you’re not waiting on a callback. Custom-welded or measured parts get a scheduled visit with a firm written price. Call (844) 761-9351 to lock in a window.
On a Viking swing gate it’s usually the hinge post, not the middle of the leaf. We check the post first because fixing the hinge without it means paying twice. Call (844) 761-9351 and a live person will set up the visit.
If your Viking gate is dragging, sagging, or won’t latch, call (844) 761-9351 for a free estimate. We’ll come out, look it over with you, write the number down, and fix it in your driveway – and you’ve got the 90-Day Done Right Promise in writing to back it up.
Written by the team at Gatewood Fence & Gate North Las Vegas, serving North Las Vegas and nearby areas.