Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterElectric Gate Repair in North Las Vegas, NV
Electric gate repair in North Las Vegas usually costs $185 to $520, depending on whether the problem is in the operator, the access controls, or the gate itself. Most calls we run here are fixed in a single visit, because the fault is almost never the whole system – it’s one part that failed. An arm that won’t pull, a keypad that stopped recognizing codes, a photo-eye knocked out of alignment by a trash can: these are the everyday ones. We repair them at your driveway instead of swapping the operator for a new one.
Gatewood Fence & Gate North Las Vegas is owner-operated, with a published address and license number anyone can look up. When you call (844) 761-9351, a live person answers, day or night. That holds for the call that comes in at 6 a.m. before work and the one at 10 p.m. when the gate has been standing open for an hour. If the trouble is more than the operator – a bent frame, a broken hinge, a gate hit by a car – start with our Gate Repair page and we’ll sort out where it belongs. Our technicians have up to 25 years of experience, and every job carries the 90-Day Done Right Promise in writing.
What to expect when you call
You get a live voice, not a queue. You’ll be asked what the gate is doing, what brand it is if you know, and whether it’s stuck open, stuck closed, or moving but not staying put. From there we give you an upfront price range before anyone rolls out. No haggling, no surprise at the door.
When You Need Electric Gate Repair
A sliding gate that stops halfway is letting anyone walk up your drive. That’s the first thing neighbors notice. Here’s what we see most often in North Las Vegas:
- The gate reverses for no reason. Nine times out of ten it’s a misaligned or dirty photo-eye safety sensor. In this valley, dust and fine sand settle on the lenses after a windy stretch, and an electric gate that was working fine in March starts acting up in April. We clean, realign, and test both eyes before we touch the operator.
- The arm moves but the gate doesn’t. On swing gates with a LiftMaster or FAAC arm, this is usually a worn arm bushing, a stripped bracket, or a hinge pin that’s seized. A gate sags in the hinge post, not in the middle, and that’s where we start looking.
- The keypad or remote stopped working. Sometimes it’s the keypad; sometimes it’s the receiver board, a dead battery in the remote, or a power surge from a summer storm. We test the control side before replacing anything, because swapping a $200 board for a $15 battery happens more than it should.
- The gate opens on its own. Ghost openings are almost always a stuck limit switch, a wet control board, or interference on the radio frequency. In older North Las Vegas subdivisions off Civic Center Drive, we see this a lot on Linear and BFT operators past the ten-year mark.
- The gate drags or grinds on the track. On a sliding gate, a worn roller or a track with grit in it will wear out the motor fast. Fix the track and the rollers, and the operator lasts years longer than it would otherwise.
- The gate is stuck open and won’t close. This is the one that brings calls at odd hours. A safety sensor that’s failed closed, a broken chain, or a control board that’s given up. If the gate is standing open on a street where it shouldn’t be, call (844) 761-9351 and we’ll get someone out.
If the gate and the frame are damaged along with the operator, we handle that under the broader Gate Repair in North Las Vegas service. Fix the panel without the post and you’ll fix it twice.
Our Electric Gate Repair Process
This is the sequence we run on every electric gate call, and it’s the same whether it’s a LiftMaster arm on a residential swing gate or a DoorKing operator on a community entrance.
- We ask what it’s doing before we ask what brand it is. The symptom tells us more than the model number. “It opens but won’t close” and “it closes but bounces back” point to different parts of the system. That first phone call saves you time and saves us a return trip.
- We check the power and the controls first. Dead outlet, tripped breaker, bad transformer, blown fuse on the board. It sounds simple, but it’s the cause on a surprising share of calls, and it costs you nothing to rule out.
- We test the safety devices. Photo-eyes, edge sensors, loop detectors. If the gate is reversing or refusing to close, this is where the answer usually lives. We test them with the gate in motion, not just sitting still.
- We inspect the mechanical side. Hinges, rollers, track, chain, arm bushings, and the post itself. A gate that’s out of alignment will burn through an operator, and no amount of new electronics fixes a gate that’s dragging.
- We repair on site, and we weld on site. Bracket broken off the post? We weld it back on the spot. The gate stays in your driveway. Nobody hauls it off to a shop across town and leaves you waiting a week.
- We test it with you watching. Five full open-and-close cycles, plus a walk-through of the safety reverse. Show me the gate closing on its own and I’ll show you where it’s failing. If it isn’t right, we’re not done.
We’re certified to service nine major gate brands, and the ones we see most on North Las Vegas residential gates are LiftMaster, FAAC, Linear, and Mighty Mule. If your operator is one of those, parts are usually on hand or a day out.
Electric Gate Repair Pricing in North Las Vegas
Here are honest ranges. Every job gets a written estimate before we start, and the number you’re quoted is the number you pay. No trip charge inside Clark County, and no haggling required.
| Repair | Typical range |
|---|---|
| Diagnostic visit (waived when you approve the repair) | $0 – $95 |
| Photo-eye or safety sensor realign / replace | $95 – $185 |
| Remote, keypad, or receiver repair | $110 – $240 |
| Control board replacement | $240 – $480 |
| Operator arm or motor repair | $285 – $650 |
| Track, roller, or hinge repair (sliding gate) | $180 – $420 |
| On-site welding (bracket, hinge, post repair) | $150 – $350 |
| Full operator replacement (if repair isn’t the right call) | $850 – $1,900 installed |
What moves the number: the brand (a FAAC or BFT board costs more than a Mighty Mule), whether the gate also needs mechanical work, and whether the operator is a commercial unit like a DoorKing with loop detectors and access controls. What doesn’t move it is the time of day. No after-hours surcharge. The phone gets answered at 2 a.m. and the price doesn’t change.
Standing offers we run year-round: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate from another company, and a permanent 10% discount for seniors and veterans. If you’ve got a quote in hand and want a straight read on it, we’ll look at it for free.
Repair or Replace: Which One Makes Sense?
Repair, most of the time. An operator that’s under roughly twelve to fifteen years old and hasn’t had a catastrophic board failure is almost always worth fixing. The exceptions: an old unit that’s already on its third board, a motor that’s been dragging against a bad track for years, or an operator that’s been discontinued and parts are hard to source. In those cases a new LiftMaster or FAAC will cost less over the next five years than repeated fixes. We’ll tell you which one you’re looking at, plainly, and we won’t push the bigger job.
What actually causes early failures here
North Las Vegas heat and dust are hard on gate operators. The control board sits in a metal box in full sun, and summer temperatures inside that box climb past what the components are rated for. Add in windblown sand working into tracks and photo-eyes, and a residential operator here sees more wear in five years than one in a milder climate sees in ten. That’s why we check the enclosure, the seals, and the ventilation on every service call. A $30 fan or a repositioned sun shield can add years.
If your neighborhood sits in one of the windier parts of town, the gate itself takes a beating too. For gates that have been hit, bent, or pulled out of the ground, the fence side of the job lives on our main home page.
FAQs – Electric Gate Repair
How much does electric gate repair cost in North Las Vegas?
Most electric gate repairs in North Las Vegas run $185 to $520, with sensor and keypad fixes at the low end and operator or control board work at the high end. A full operator replacement, if it comes to that, runs $850 to $1,900 installed. Call (844) 761-9351 for an exact quote – estimates are free, and so is a second opinion on any written estimate you already have.
Can you come out today?
Usually, yes. We keep same-day slots open for gates that are stuck open, stuck closed, or a security concern. Call (844) 761-9351 and a live person will tell you honestly what’s available today – not a window we can’t hit. We answer around the clock, every day.
Do you repair the operator or only replace it?
We repair it. Replacing an operator is the last option, not the first. Most failures are one part – a sensor, a board, an arm bushing – and we’d rather fix that part and leave the rest of the system alone. When a unit really is past saving, we’ll show you why before we recommend replacement.
What brands do you service?
We’re certified on nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your operator isn’t on that list, call anyway with the model number – we’ll tell you straight whether we can help or point you somewhere that can.
What if the repair doesn’t hold?
One call brings us back. Every job we do carries the 90-Day Done Right Promise in writing. If something we fixed fails inside 90 days, we come back and make it right. No runaround, no fine print.
We’re a locally owned, owner-operated gate shop with a published address and license number, and the name is on the invoice. Background-checked, uniformed technicians show up when we say they will. If you want a second set of eyes on a gate that’s acting up, or a straight answer on what it needs, call (844) 761-9351 for a free estimate. We’ll be there.
Written by the team at Gatewood Fence & Gate North Las Vegas, serving North Las Vegas.