Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Enterprise
If your gate is dragging, sagging, or tripping its operator, we can help. We handle Gate Parts & Welding across Enterprise, NV, with on-site welding and a repair-first approach so your gate stays in your driveway instead of getting hauled off. Call (844) 761-9351 and a live person picks up, day or night.
We know the 89139 corridor south of the 215 well. That matters because Enterprise gates are a different animal than gates in older parts of the valley, and the fix usually starts somewhere most people don’t expect.
Why Gatewood Fence & Gate North Las Vegas Is Enterprise’s Preferred Gate Parts & Welding Company
Enterprise is master-planned HOA suburbia, and we get that. Almost every gate in the 89139 tract communities has to match a tract-wide design standard, so a repair here is as much about staying inside the acceptable iron, vinyl, or aluminum palette as it is about the mechanism. Somebody who doesn’t understand architectural review will fix your gate and leave you holding an HOA compliance letter. We don’t work that way.
We repair what other companies want to replace. Our technicians have up to 25 years of experience, and every job carries the 90-Day Done Right Promise stamped in writing. If it’s not done right, we make it right with one call, no runaround. Calls get answered by a live person around the clock, not a voicemail or a queue three states away.
We also know the specific failure pattern in Enterprise. The 1990s to 2010s tract homes here were built with manual gates that homeowners later automated, but the original posts and footings were never sized for an operator. So most swing gate failures in Enterprise start at the hinge post, not the motor. That single fact saves people from replacing a perfectly good motor that was never the problem. The name is on the shop and the shop is down the road, which is the oldest accountability there is.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Enterprise
When your gate fails, here’s how we go at it. Not every Enterprise job needs all of this, but these are the four we run into most.
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. In Enterprise, the builder-grade hinges on those 15- to 30-year-old tract gates are hitting end of life at scale. We cut off the tired hardware, weld on heavy-duty replacements, and correct the sag before we touch anything else. Fix the panel without the post and you’ll fix it twice.

Post Replacement
This is the big one in Enterprise. When a retrofitted LiftMaster or Linear operator torques a hinge post that was set shallow in desert soil and never designed for that load, the footing gives up. We dig out the old footing, pour a deeper post, and re-hang the gate so the whole assembly carries the load it was never built to carry. On-site welding means it all happens in your driveway, matched to your original builder’s style.

Rail Repair
Mojave heat and UV fade powder coat and warp vinyl, and monsoon dust storms jam tracks and stress rails. We straighten bent rails, repair weld seams that cracked, and get slide gates tracking true again. We match the finish to what’s already there so the repair doesn’t stand out to your neighbors or the ARC.

Custom Welding
Sometimes a part doesn’t exist anymore, or it does but nothing off the shelf fits your gate. That’s where on-site welding earns its keep. We fabricate the bracket, patch, or mount you need on the spot, including operator mounts and reinforcement plates for retrofitted automation. Your gate never leaves the property.
Trusted Brands We Service in Enterprise
We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, and Linear. We don’t claim to stock parts locally. Instead, we diagnose what failed and source the right hardware fast, so you’re not waiting weeks on a truck from out of state. Most Enterprise repairs come together quickly once we know whether the problem is the post, the operator, or the sensor, and we tell you which one it is before any work begins. We quote the price and agree on it with you first, every time.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Enterprise Homes
- Undersized hinge posts on automated gates. The builder put in a manual gate, a later owner added an operator, and the post was never sized for the torque. Sagging swing gates in Enterprise usually trace right back to that footing.
- After-the-fact power and conduit runs. Enterprise homes didn’t come with conduit for a gate operator. When it gets added later, you get voltage drop or exposed wiring that trips the operator and leaves you guessing.
- UV-baked photo-eyes and lubricants. The 105°F summers here cook the safety sensors and lubricants on LiftMaster and Linear operators, causing intermittent safety reverses and jamming in the heat.
- Shared property lines and HOA standards. In Enterprise’s tract communities, one sagging gate is a neighbor dispute and an HOA compliance letter waiting to happen. Matching the original builder’s iron, vinyl, or aluminum style and color exactly is part of the job, not an afterthought.
Pricing for Gate Parts & Welding in Enterprise, NV
We give you upfront pricing and agree on it before any work starts, so there’s no invoice surprise at the door. Here’s what Enterprise jobs typically run:
| Job | Typical Enterprise Range |
|---|---|
| Hinge replacement (per hinge, welded) | $145 – $310 |
| Post replacement with new footing | $420 – $850 |
| Rail repair or re-weld | $180 – $390 |
| Custom welding / fabricated bracket or mount | $210 – $560 |
| Roller or track hardware swap | $90 – $220 |
Deep footings, matched-style fabrication for HOA sign-off, and re-mounting an operator push a job toward the top of these ranges. Standing offers include $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (844) 761-9351 for a free estimate.
We Also Serve Cities Near Enterprise
We take care of gates throughout the valley, not just Enterprise. If you’re in Spring Valley, Paradise, Winchester, or Henderson, you get the same on-site welding and 90-Day Done Right Promise. Same live person on the phone, same upfront pricing. Call and let’s talk about what your gate is doing.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Enterprise
Because the operator was never the problem. In Enterprise’s 1990s – 2010s tract communities, the original hinge post was set in shallow desert soil and never sized for the torque of a retrofitted LiftMaster or Linear operator, so the footing gives way under the load. A proper fix digs out the old footing, pours a deeper post, and re-hangs the gate with heavy-duty hinges and a sag correction before re-mounting the operator. Call (844) 761-9351 for a free estimate on yours.
Yes, and it’s common here, but the post and footing usually need attention first so the automation holds up. We check the hinge post, size the power and conduit run properly, and pick hardware that fits your operator, then match the gate to your builder’s style so architectural review goes through. Call (844) 761-9351 and we’ll give you a written price before any work starts.
That’s usually UV-degraded photo-eye sensors and baked lubricants combined with 105°F heat, not a dead motor. We replace the safety photocell, re-align the rack and pinion on slide gates, and re-lubricate with heat-rated product so it stops the intermittent reverses. Don’t force it or bypass the safety sensor; call (844) 761-9351 and we’ll sort it out.
It depends on how your gate is used and what your HOA requires, but loop detectors and keypads are common on automated driveway gates in 89139. We’ll size the setup to your gate and explain the options and the price before we install. Call (844) 761-9351 to schedule a written estimate.
We match the iron, vinyl, or aluminum style and finish to your tract standard, and we weld on-site so the repair blends with the original gate rather than standing out. We’ve done enough work in these Enterprise communities to know what architectural review looks for. Call (844) 761-9351 and we’ll take a look.
If your gate is sagging, jammed, or tripping its operator, call Gatewood Fence & Gate at (844) 761-9351 for a free estimate. A live person answers around the clock, and every job in Enterprise carries the 90-Day Done Right Promise in writing.
Written by the team at Gatewood Fence & Gate.