Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterWeld & Rust Repair in North Las Vegas, NV
Weld and rust repair is what keeps a sound gate out of the scrap pile. If your gate has a cracked hinge post, a sagging frame, a broken latch tab, or rust eating through the bottom rail, we weld it on site in your driveway instead of hauling it off or selling you a new gate. That matters here in North Las Vegas, where dry air and intense sun do one kind of damage and the occasional monsoon-season soaking does another.
For Gate Repair in North Las Vegas, rust is rarely the whole story. A gate that rusts through at the bottom often has packed dirt and sprinkler overspray sitting against its base, and a gate that sags usually failed at the hinge post, never the middle. That’s where we start looking. Call (844) 761-9351 and you’ll get a live person, day or night, not a voicemail.
We’re locally owned and owner-operated since 2001, with a published address and license number anyone can look up. On-site welding is a real part of what we do, not a service we farm out. We handle repair work of this kind for LiftMaster, FAAC, BFT, and Linear gate systems, and our technicians have up to 25 years of experience.
Key Takeaways
- Most rust damage starts at the bottom rail and hinge post, where water and dirt collect.
- On-site welding keeps your gate in your driveway and off a tow truck.
- We repair first and replace only when the metal won’t hold a weld.
- Every weld and rust job carries the 90-Day Done Right Promise in writing.
- Calls are answered by a live person, 24/7, and estimates are free.
When You Need Weld & Rust Repair
Rust doesn’t announce itself. It shows up as a gate that drags, a hinge that won’t hold, or a spot of orange you noticed when you were out with the hose. Here are the situations that bring people to us most often in North Las Vegas:
- A cracked or torn hinge post. The hinge post takes the whole weight of the gate, so it’s the first thing to fail. Once it cracks, the gate sags and starts dragging on the ground.
- Rust at the bottom rail and base. This is the classic North Las Vegas problem. Dirt, lawn debris, and sprinkler overspray collect at the base and hold moisture against the metal. When that rail rusts through, the gate loses its lower stiffness and starts to twist.
- Broken latch tabs and pass-through gaps. A latch tab that snaps off leaves your gate not closing right, which is a headache even if it isn’t a full security failure.
- Pest and pack work. Sagging gates that have rusted at the welds often need the old weld ground out and a fresh one laid in, especially on drive gates in older parts of town where the frames have been sitting out in the sun and weather for years.
- Damage from wind and monsoon gusts. High summer winds and the occasional strong storm push gates past their design load. A gate that gets slammed can crack at its weakest weld, usually right at a hinge.
- Sloppy work someone else left behind. Cold welds, welds ground smooth to hide a poor joint, or a panel patched without fixing the post underneath. We see it and we fix it so you don’t have to fix it twice.
If you can’t tell whether it’s a weld or a rust problem, a quick look tells us. That’s part of what a free estimate is for. The same eye applies when we look at motorized gates, so if your opener is part of the picture, the home page lays out how the whole service fits together.
Our Weld & Rust Repair Process
We’re repair-first by nature. That means we look for the fix that keeps your gate in place before we ever talk about replacing it. Here’s how a weld and rust job runs from start to finish.
- Look at the gate in person. We come out and check the hinge posts, the bottom rail, the frame welds, and the latch hardware. A gate sags in the hinge post, not in the middle, so that’s where we look first. You get the full picture before anyone touches a tool.
- Give you an upfront price. You get the number in writing before we start, and that number doesn’t change at the door. No haggling, no mid-job surprises.
- Prep and clean the metal. Rust gets ground back to bare steel. A weld won’t hold on rust or paint, so this step is not one you skip. We treat any remaining pitting so it doesn’t come right back.
- Weld on site. This is the part we’re known for. The gate stays in your driveway. We grind out the old joint and lay in a fresh weld at the joint that’s failing, then true the frame so the gate closes properly and swings without dragging.
- Seal and finish. We coat the welded areas and rust spots so moisture stays out. On older gates, we’ll tell you if a spot is going to be a yearly touch-up instead of a one-time fix.
- Shake it, test it, and stand behind it. You get the gate closed, latched, and tested with you there. And then there’s the 90-Day Done Right Promise, stamped in writing on the job: if it isn’t right, one call brings us back, no runaround.
If the gate needs more than welding, we’ll tell you. Sometimes a gate that’s beyond welding needs a full frame repair or new panels, and we’ll outline that honestly rather than weld something twice. Learn more about Gate Repair for the wider picture of what we handle.
Weld & Rust Repair Pricing in North Las Vegas
Let’s talk numbers, because most folks just want to know what this runs. Prices below are typical ranges for weld and rust repair in the North Las Vegas area. Your exact quote depends on the gate and the amount of rust, so treat these as a starting point rather than a firm bid.
| Job | Typical Price Range |
|---|---|
| Spot weld and seal at a single hinge or latch point | $75 – $150 |
| Hinge post weld and re-hang a sagging gate | $150 – $300 |
| Bottom rail rust repair or replacement | $175 – $350 |
| Full frame re-weld on a drive gate (larger gates run higher) | $250 – $500 |
| Multiple rust spots treated and sealed | $100 – $275 |
What moves the price up or down:
- How much rust there is. Surface rust cleans up fast. Structural rust at a weight-bearing joint takes longer and costs more.
- Gate type and size. A small walk gate is quicker to handle than a wide drive gate. Automated gates add a little time because the opener has to be re-tested after the weld.
- Access and equipment. A gate that’s easy to reach is faster. We weld on site, so we don’t charge for hauling a gate away and bringing it back.
- Brand and control hardware. Gates with LiftMaster, FAAC, BFT, or Linear operators need a quick re-test once they’re welded, and we build that into the quote from the start.
Here’s where the standing offers help. You get a $40 off any repair over $200 right off the top, no trip charge inside the county, a free second opinion on any written estimate (bring us the one you already have), and a permanent 10% discount for seniors and veterans. Those don’t require haggling. They’re there.
We don’t give phone quotes and then change them at the door. The estimate you get is the price you pay. If the number on the phone isn’t the number at the door, that’s not a company you want coming back, and it’s not how we do business.
FAQs – Weld & Rust Repair
Can you weld my gate on site, or does it have to be hauled away?
We weld on site, and the gate stays in your driveway. On-site welding is standard for us, so you don’t pay to have the gate trucked off and brought back. That keeps the cost down and keeps your property secure during the work. Call (844) 761-9351 to set up a time.
How much does rust repair cost in North Las Vegas?
Rust repair typically runs $100 to $350 depending on how much metal needs to be cleaned and sealed. Spot treatment at one or two rust points sits at the low end. A bottom rail rusted through that needs replacement sits at the high end. Call (844) 761-9351 for an exact quote, and your estimate is free.
Is it cheaper to repair a rusted gate or replace it?
Repair is usually cheaper than replacement unless the frame has rusted through in two or more weight-bearing spots at once. If only a hinge post or bottom rail is rusted, a proper repair keeps the gate and its original look. If the whole frame is gone, we’ll tell you straight rather than charge you to weld metal that won’t hold. Call (844) 761-9351 for a free second opinion if you’ve already been quoted a replacement.
Can you come today?
Same-day visits are often possible in North Las Vegas depending on the day’s schedule. Calls are answered by a live person 24/7, so you’ll talk to a person, not a voicemail, and we’ll tell you honestly when we can get there. If you want a same-day look, call (844) 761-9351 early in the day.
Do you guarantee the weld job?
Yes. Every weld and rust job comes with the 90-Day Done Right Promise in writing. If a weld fails or a rust spot comes back within 90 days, one call brings us back to make it right. We don’t hedge it and it isn’t buried in fine print.
Get Your Weld & Rust Repair Done Right
If your gate is sagging, cracked at a hinge, or rusting through at the bottom, don’t let it get worse. We’re Gatewood Fence & Gate North Las Vegas, locally owned and owner-operated since 2001, with a published address and license number anyone can check. Our technicians have up to 25 years of experience, and every job carries the 90-Day Done Right Promise in writing. Call (844) 761-9351 for a free estimate. A real person answers, day or night.
Written by the team at Gatewood Fence & Gate North Las Vegas, serving North Las Vegas.