A Gatewood company - serving North Las Vegas, NV

Ghost Controls Gate Repair in Whitney, NV

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Gate Repair in Whitney, NV

We repair Ghost Controls gate operators across Whitney, NV as an independent service provider – we’re not affiliated with, authorized by, or warrantied through Ghost Controls. The one thing that makes our Ghost Controls work different here: most calls in Whitney aren’t really motor failures. They’re sun-baked control boards and sagging chain-link drive gates straining a healthy arm. We sort out which problem you actually have before anyone touches a part. Call (844) 761-9351 and a live person picks up, day or night.

Call (844) 761-9351

Why Whitney Residents Choose Us for Ghost Controls Service

Ghost Controls builds a fairly narrow family of low-voltage and solar-capable swing and slide operators. That narrowness is good news for you, because the same handful of quirks show up again and again – and working on them in Whitney’s heat and dust is how you learn those quirks cold. We’ve serviced Ghost Controls units long enough to know what a cooked battery harness looks like versus a jammed limit switch, and to tell the difference before we swap something that didn’t need swapping.

Whitney calls get answered by a person, not a queue. If your TDS single swing operator is stalling mid-travel on a gate off Boulder Highway, we’ll tell you on the phone whether it sounds electrical or structural, then come look. Our techs have up to 25 years of experience, and every job carries the 90-Day Done Right Promise in writing. We don’t haul gates off to a shop to diagnose them. If it can be fixed in your driveway, it gets fixed in your driveway.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Common Ghost Controls Gate Repair Problems We Solve in Whitney

Here’s what we actually find when a Ghost Controls system quits in Whitney:

  • Baked control boards and battery harnesses. Whitney summers push past 105°F, and relentless UV dries out every seal on the control box. The symptom looks like a dead motor – short run times, false low-battery faults, or a gate that stalls halfway. Usually it’s the board or the harness, not the arm.
  • Cracked actuator seals letting in grit. Low humidity and blowing dust crack the seals on the actuator arm. Once dust gets inside, it packs the limit switches and the arm jams. You’ll hear the motor run and stop at the wrong spot.
  • Sagging gate leaves on rusted, undersized hinges. This is the big one in Whitney. Cheap galvanized and cold-rolled steel hardware on lightweight wrought-iron and chain-link drive gates rusts and sags the leaf, so a perfectly healthy Ghost Controls arm binds, strains, and trips out.
  • Monsoon wind and dust misaligning the operator arm mount. Seasonal wind bends lightweight gates and knocks the arm mount out of line. The gate drifts out of the closed position or reverses at random. The operator isn’t failing – the geometry moved.
  • Failed solar charging on older kits. Solar-efficient Ghost Controls kits on rental and mobile-home properties often sit with panels dirty or shaded for years. The battery never fully recovers, and the gate slows to a crawl or won’t open at all by late afternoon.

Ghost Controls Service in Whitney: What Local Conditions Mean for Your Equipment

Here’s the fact that shapes most of our Ghost Controls work in Whitney, and it doesn’t play out the same way in the older, wealthier neighborhoods to the northwest. Much of Whitney’s housing is 1980s – 2000s tract subdivisions and mobile-home parks east of Las Vegas, where the driveway and side-yard RV gates are chain-link and light wrought iron on long, narrow lots. So a Ghost Controls call here usually starts with the gate structure, not the operator. The operator gets blamed. The hinges and the sagging leaf are the actual problem.

A typical Whitney call goes like this: a solar swing operator on a chain-link or light wrought-iron drive gate has stopped opening all the way, and the homeowner figures the motor finally died. What usually surfaces is a sun-baked battery or control board plus a gate leaf sagging on rusted, undersized hinges – and that sag overloads the arm. A qualified local tech checks voltage and the control box first, then repairs or replaces the hinges and post, realigns the arm mount, and tests full travel before replacing any operator part. Walk that gate in the eastern 89122 edges and you’ll see decades-old, mismatched hardware on rental and mobile-home parks where a simple repair call can turn into a full retrofit. That’s why the honest first move is structural, every time.

Ghost Controls Models & Products We Service in Whitney

We cover the Ghost Controls lines you’re likely to own: the Heavy-Duty Single Swing (TDS series), the Dual Swing Gate Opener (TSS/TSV series), the Solar-Efficient Swing Opener kits, and the Ghost Controls Slide Gate Operator. On parts, we go OEM first – Ghost Controls boards, arms, batteries, and control boxes where they’re still available. When a part is discontinued or the gate hardware was undersized from the start, we fit quality aftermarket solar panels, batteries, and heavy-duty hinges that hold up better in this climate. We don’t claim to keep local stock; parts are ordered per job, and we’ll tell you upfront what’s coming and when. It’s part of Ghost Controls service done honestly, not a one-size part swap.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ghost Controls Service Pricing in Whitney

Ghost Controls repairs in Whitney generally run from about $150 for a battery or limit-switch fix up to roughly $650 for a full operator and hinge retrofit on a sagging gate, depending on what’s actually wrong. Here’s what we typically charge for the work we do most here:

Job Typical Range
Diagnostic visit (credited toward the repair) $75 – $125
Control board or battery replacement $180 – $320
Operator arm / limit switch repair $150 – $280
Hinge & post repair (welded on site) $200 – $450
Full operator + hinge retrofit $400 – $650

What drives the price: whether the gate is structurally sound, whether we’re into the operator or the hinges, and whether OEM parts are still available. Every price is quoted and agreed before any work starts – no surprise invoice at the door. The estimate is free, and the $40-off-any-repair-over-$200 offer stands without you having to ask. Call (844) 761-9351 for an exact quote on your Whitney gate.

Serving Whitney, NV – Our Local Coverage Area

We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Ghost Controls Gate Repair in Whitney

Service Areas Near Whitney

We handle Ghost Controls repair throughout Whitney and the surrounding east valley. That includes North Las Vegas, Las Vegas, and Paradise, plus Sunrise Manor and Winchester. If you’re on the fence about whether you’re in our range, call and ask – we’ll tell you straight. You can also see the broader Whitney service area we cover.

Book Your Ghost Controls Service in Whitney Today

If your Ghost Controls gate is stalling, sagging, or quitting in the heat, let’s sort it out before it strands you. We keep same-day availability where we can, answer the phone live around the clock, and quote the price before any work begins. Call (844) 761-9351 for a free estimate on your Whitney gate.

Written by the team at Gatewood Fence & Gate.

Need Gate Repair help in Whitney? Licensed & insured · 60-minute response · free estimates
Call (844) 761-9351
Local Service Coverage

Request a Free Estimate in Whitney

Tell us what you need - Gatewood Fence & Gate North Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch