Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateWhy North Las Vegas Homeowners Choose Ghost Controls Gate Repair
We provide independent Ghost Controls gate repair service in North Las Vegas, NV. That means we diagnose and fix AXO solar and ARX AC swing-gate operators with OEM or equivalent-quality parts, we don’t replace a control board until we’ve ruled out the battery, panel and limit arm, and we quote the price before anyone touches your gate. Most Ghost Controls calls we run in North Las Vegas are solar-battery faults or drifted limit arms wearing a board-failure costume.
To be clear about who we are: Gatewood Fence & Gate North Las Vegas is an independent service provider. We are not authorized, sponsored or endorsed by Ghost Controls. We repair, realign and re-motor their systems, and we also work on eight other major brands when a homeowner needs a second opinion.
A live person answers the phone at (844) 761-9351, day or night. That’s the whole pitch.
Key takeaways:
- We service AXO solar kits, ARX AC operators, dual-gate kits, and TDS/TSS tube-style openers.
- We’re independent, not manufacturer-authorized, and we say so plainly.
- Every repair carries the 90-Day Done Right Promise in writing.
- $40 off any repair over $200, free second opinion on any written estimate, and 10% off for seniors and veterans.
Why Trust Gatewood Fence & Gate North Las Vegas for Your Ghost Controls Gate Repair?
Ghost Controls is one of nine brands our technicians are certified to service, and we see their swing operators often enough that the failure patterns are familiar before we open the control box. Our technicians have up to 25 years of experience, and the Ghost Controls work we do in North Las Vegas is steady: AXO solar boards, ARX AC operators, and the proprietary limit and obstruction behavior that generic gate techs misread as a dead control board.
Here’s where that matters. Ghost Controls uses its own control logic, and the AXO and ARX boards behave differently from a LiftMaster or Mighty Mule when something goes wrong. A tech who doesn’t know the platform will pull a board, order a new one, and bill you for a part that was never the problem. We diagnose first, then price. We lean on genuine Ghost Controls control boards, actuator arms, batteries and receivers where the part is available and the cost makes sense, and we use quality aftermarket hardware for mechanical items like hinges, brackets and posts where the OEM part adds cost without adding life.
Warranty-safe practice is part of the job. We document what we did and why, keep OEM parts on board-related repairs, and don’t cut corners that would give a manufacturer a reason to walk away from a claim. If your opener is still under factory coverage, we’ll tell you what’s covered before we touch it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Fix in North Las Vegas
The five failures below account for most Ghost Controls calls we run in North Las Vegas. Each one has a real cause, and each one is worth diagnosing properly before anyone reaches for a replacement board.
- Solar-battery drain and low-voltage stalls on AXO kits. The AXO control board throws a low-battery fault, or the gate stops mid-travel, when the panel isn’t keeping up with a tired battery or a shading problem. Desert dust on the panel and a battery that’s five summers old are a common pair, and the board reads as guilty when it’s really the power supply. We check battery voltage and panel output before anything else.
- Limit-arm and bracket drift on sagging gates. The actuator arm and limit cams work loose on a gate that’s sagged in the hinge post, so the opener over-travels, reverses, or stops short of full open. This is the Ghost Controls symptom owners describe as “it opens partway then backs up,” and it’s nearly always mechanical, not electronic. Fix the gate alignment first, then reset the limits.
- Obstruction-sensor and photo-eye false trips. Misaligned or dirty sensors make the board reverse the gate repeatedly, which homeowners usually read as a board failure. In North Las Vegas, windblown dust and the occasional monsoon habob push grit into the sensor path. Cleaning, realigning and testing the eyes is a fraction of the cost of a board.
- Remote and keypad pairing faults. Remotes stop learning, or the keypad drops out after moisture gets into the control-box wiring or the receiver module. Monsoon rain wicking into a box that bakes all summer is the usual trigger. Sometimes it’s the receiver, sometimes it’s a corroded terminal, and the difference matters to your invoice.
- Sun-baked control boxes on original builder gates. In Aliante and similar HOAs, we regularly see operators fail after only a few years because the afternoon sun hits the control box directly and the internals cook through summer. Uniform community style means the box usually sits where the builder put it. We look at heat exposure as part of every diagnosis.
Worth knowing: North Las Vegas’s rapid build-out of master-planned communities like Aliante and Eldorado in the 2000s left thousands of homes with original builder-grade steel and vinyl gates that are now failing at the same time. Gate repair here is largely a wave of 15-to-20-year-old operator and hinge replacements rather than new installs, and a Ghost Controls opener bolted to a 2005 gate is working against a hinge post that’s had two decades of desert swing.
Ghost Controls Parts & Our Repair-vs-Replace Approach
We use genuine Ghost Controls parts on the items that carry the control logic: AXO and ARX control boards, actuator arms, batteries and receiver modules. For mechanical hardware like hinges, brackets and posts, we use quality aftermarket parts built for the load, which keeps the repair cost honest without shortening the life of the gate. We don’t claim to stock Ghost Controls parts locally. We source per job, which means we quote you accurately instead of promising a part we don’t have.
Repair or replace comes down to age and exposure. If the actuator, arm and board are all aged out on a sun-baked gate, a full opener replacement usually beats chasing parts one at a time. We’ll tell you that plainly. If one component failed on an otherwise healthy operator, we repair it. The price is quoted and agreed before any work starts, so you’re never surprised by the invoice. Call (844) 761-9351 for a free second opinion on any written Ghost Controls estimate you already have.
Our Ghost Controls Service Process – Step by Step
- 1
Diagnosis. We check battery voltage and solar panel output first on AXO kits, then verify limit cams, the actuator arm and the obstruction sensors. On ARX AC operators we start at the power supply and work back to the board. This is what stops a good board from getting replaced.
- 2
Quote and agreement. You get an upfront price on the repair, and the price is agreed before any work begins.
- 3
Repair or install. We realign the gate, replace the failed battery, board, arm or receiver, and weld or re-anchor anything mechanical that’s failed. On-site welding means the gate stays in your driveway.
- 4
Test and calibrate. We cycle the gate through full travel, re-teach the limits, re-pair remotes and keypad, and verify the obstruction reversal actually works.
- 5
Warranty. Every job carries the 90-Day Done Right Promise in writing. If something we fixed acts up, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Products We Service & Install in North Las Vegas
We service the AXO series solar swing-gate operator kits, the ARX series AC-powered swing-gate operators, and the heavy-duty dual-gate kits for double-swing applications. That includes the TDS and TSS tube-style swing gate opener kits, plus the keypad, remote and receiver accessories that go with them. Battery backup and motor repair are standard parts of the work on all of the above, and swing gate service covers realignment, hinge replacement and post repair along with the electronics. If you’re adding a Ghost Controls kit to an older gate in North Las Vegas, we’ll measure first and schedule the install rather than promise a same-day job.
We Also Service These Brands
We’re a multi-brand gate shop, not a single-brand one. Alongside Ghost Controls, our technicians are certified to service LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite and Mighty Mule. That matters when a homeowner has a Ghost Controls opener that’s reached the end of its life and wants to compare options, or when a LiftMaster gate next to a Mighty Mule gate on the same property both need attention. One call covers the whole property.
FAQs – Ghost Controls Gate Repair Service in North Las Vegas
No. We are an independent service provider and are not authorized, sponsored or endorsed by Ghost Controls. We service their products as one of nine major gate brands we’re certified to work on, and we tell you plainly what we’re not.
Yes, on the parts that carry the control logic. We use genuine Ghost Controls control boards, actuator arms, batteries and receivers for AXO and ARX repairs where the part is available and cost-effective, and quality aftermarket hardware for mechanical items like hinges, brackets and posts. We don’t stock Ghost Controls parts locally, so parts are sourced per job and quoted before we order. Call (844) 761-9351 for a free estimate.
Most Ghost Controls repairs are diagnosed and completed in a single visit when the failed part is one we can source quickly. A battery or limit-arm issue is often same-day. A control board or actuator arm that has to be ordered takes longer, and we’ll tell you the timeline upfront rather than guess at the door.
We cover the AXO series solar swing-gate kits, the ARX series AC-powered operators, the heavy-duty dual-gate kits, and the TDS and TSS tube-style swing gate opener kits, along with keypad, remote and receiver accessories. If you’re unsure which series you have, read us the model number off the control box and we’ll tell you.
Not when it’s done correctly. We use OEM parts on board-related repairs, document what we did and why, and stay warranty-safe by not cutting corners. If your opener is still under factory coverage, we’ll tell you what’s covered before we start so there’s no surprise on either side.
Ghost Controls gate repair in North Las Vegas typically runs $180 to $420 for a battery, limit-arm or sensor repair, and $350 to $650 when a control board or receiver has to be replaced. A full AXO or ARX operator replacement on an aged-out gate runs higher, and we quote that separately once we’ve seen the gate. The price is quoted and agreed before any work starts. We take $40 off any repair over $200, there’s no trip charge inside the county, and seniors and veterans get a permanent 10%. Call (844) 761-9351 for an exact quote. Estimates are free.
Book Your Ghost Controls Service in North Las Vegas, NV
If your Ghost Controls gate is stalling, reversing or sitting dead after a hot afternoon, call (844) 761-9351. A live person answers, we quote before we start, and every Ghost Controls repair in North Las Vegas carries the 90-Day Done Right Promise in writing. Free estimate, free second opinion on any written estimate you already have.
Written by the team at Gatewood Fence & Gate North Las Vegas.