Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Boulder City, NV
We provide independent Ghost Controls gate repair across Boulder City, from the historic district to the desert lots out past the McCullough Range. What makes our Ghost Controls work different here comes down to the ground: Boulder City sits on caliche and dam-era masonry, so a swing arm that worked fine on a Vegas footing often has to be re-anchored before it will hold. Call (844) 761-9351 and a live person picks up, day or night.
Why Boulder City Residents Choose Us for Ghost Controls Service
Ghost Controls is a DIY-oriented brand, and a lot of the operators we see in Boulder City went in by a homeowner with a Saturday and a kit. That’s fine. It also means we spend more time re-commissioning than replacing: undersized batteries, solar panels pointed the wrong way, photo beams aimed at the dirt instead of each other. We know those systems cold, and we’ll tell you straight whether yours needs a board, a battery, or just somebody to set the limits right.
We’re certified to service nine major gate brands, Ghost Controls among them, alongside LiftMaster, Mighty Mule, DoorKing and the rest. That matters more than it sounds. We have no reason to talk you into a brand swap, because we work on all of them. Every job is quoted upfront and agreed before we touch a thing. If we’re coming to you in Boulder City, you’re not getting a number at the door that’s bigger than the number you heard on the phone.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Boulder City
- Battery and solar-charge failure. Boulder City summers run past 100°F, and that heat plus hard UV cooks the sealed lead-acid batteries and dulls the solar panels mounted on gate posts. The operator starts a low-voltage beep, then quits mid-travel. Usually the fix is a fresh battery and a solar check, not a new unit.
- Photo beams and control boards fouled by dust. Wind-driven sand coats the safety-beam lenses and settles inside the control enclosure. The result is phantom reversals and “obstruction” faults on an arm that’s mechanically healthy. Cleaning and reseating the beams and box clears most of these.
- Loosened arms and brackets on baked posts. Dried post timber and loose masonry anchors let swing arms drift out of geometry. The operator strains, or the gate sags and drags the arm. In Boulder City this is the most common problem we find, and it starts at the post, not the motor.
- Seized pivots and manual-release hardware. Low humidity plus the occasional winter freeze oxidizes pivots and limit cams. The gate gets hard to open by hand, and travel limits drift off. We free the hardware and re-set the limits.
- Wiring and harness faults at connectors. Sun-brittled low-voltage wire at the arm and keypad connections causes intermittent faults that come and go with temperature. We trace them at the connector rather than guessing at the board.
Ghost Controls Service in Boulder City: What Local Conditions Mean for Your Equipment
Boulder City’s core was built by the Bureau of Reclamation starting in 1931, and the ground here still shows it. Many gate posts in the historic district are anchored into dam-era masonry and caliche rather than fresh concrete footings, which changes the whole job. A Ghost Controls arm that worked on a Vegas install often can’t simply be bolted to the existing post. Old-timers will tell you a post-hole that takes ten minutes in Vegas takes an afternoon here with a rock bar. Matching hardware into that old block and re-anchoring is its own craft. The cliff note for Ghost Controls owners: dead batteries and dusty beams are common everywhere, but this anchoring problem is a historic-district thing, and no generic operator page accounts for it.
Ghost Controls Models & Products We Service in Boulder City
We service the Ghost Controls Heavy-Duty Dual Swing (TDS series) kit and the Standard-Duty Single Swing (TS series) kit, along with the solar-charged swing operator kits and their optional plug-in transformer. On the accessory side that means the photo-beam safety kit, wireless keypad and the plug-in entry modules.
For parts, we lean toward Ghost Controls’ own boards, arms, harnesses and battery/solar components. On a DIY-platform operator the brand’s parts are usually the right call, and aftermarket substitutes often mismatch the controller’s voltage sensing. We don’t claim to stock parts locally, so we source per job and tell you the lead time upfront.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Boulder City
Pricing depends on what’s actually wrong: a battery and beam clean is a lighter job than a board replacement, and re-anchoring an arm to old masonry runs higher because it’s real labor in hard ground. We quote it upfront and agree it before work starts, so you know the number before we’re in your driveway. A free estimate includes a full look at the operator, the beam and control box, the battery and solar output, and the gate post and hardware – because on a Ghost Controls unit in Boulder City, that last part is often the real cost driver. Call (844) 761-9351 to set one up.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Boulder City
Usually not. A beep-and-stop in Boulder City summer heat is most often a tired battery plus grit-coated photo beams, not a failed motor. We test the battery, clean the beams, check solar output and re-set the travel limits. Call (844) 761-9351 if it’s doing this to you.
Yes, but it often can’t be bolted straight to the existing post without re-anchoring first. Dam-era masonry and caliche don’t hold hardware the way a fresh footing does, so we reinforce or re-anchor the post and brackets as part of the job.
They can, which is why we reseat the beams and enclosure properly and show you the cleaning points so it doesn’t build up. Boulder City dust is relentless, so a quick seasonal check goes a long way. Call (844) 761-9351 for a look.
Repair it if the operator is mechanically sound. We fix boards, batteries, beams and hardware before we recommend a new unit, and only push replacement when the gearbox or arm is genuinely worn out. Get a free second opinion on any written estimate.
Yes. We service Ghost Controls, LiftMaster, Mighty Mule, DoorKing and the other major brands, so a property with mixed equipment gets handled on one visit. Call (844) 761-9351 to book.
Service Areas Near Boulder City
We also cover North Las Vegas, Sunrise Manor, Las Vegas, Winchester and Paradise, and for Ghost Controls work nearby we handle Henderson and Whitney. See our full Boulder City service area page for coverage, and read more about our Ghost Controls service if you want the brand detail.
Book Your Ghost Controls Service in Boulder City Today
Call (844) 761-9351 for a free estimate on your Ghost Controls repair in Boulder City. A live person answers around the clock, we quote upfront and agree it before work starts, and every job carries our 90-Day Done Right Promise in writing. Same-day availability on repair calls when the schedule allows – call and we’ll tell you.
Written by the team at Gatewood Fence & Gate North Las Vegas.