Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Enterprise, NV
We repair Ghost Controls operators independently across Enterprise, NV. What makes our Ghost Controls work here different is simple: most of the gates we open and adjust in Enterprise sit inside planned-community tract standards, so every arm alignment, board swap, and battery change has to keep the builder’s original gate style and finish intact. We’re an independent service provider, not affiliated with, authorized by, or endorsed by Ghost Controls. Call (844) 761-9351 and a live person picks up.
Why Enterprise Residents Choose Us for Ghost Controls Service
We see Ghost Controls AXO and ACU boards, TDS and TSS kits, dual-gate pairs, and slide operator packages in this corridor of the valley every week. That means we already know how the AXO board reads a stalled arm, how the solar charge controller behaves when a battery has cooked through a Mojave summer, and which limit-switch quirks send a generic tech down the wrong path. If you’ve had another company tell you the whole operator is shot, we’ll give you a free second opinion on any written estimate before you spend a dime.
We’re locally owned and owner-operated, and we answer the phone around the clock. Every job carries our 90-Day Done Right Promise in writing. For the Ghost Controls service side of our shop, that promise is what keeps us honest: if the gate reverses again inside ninety days, one call brings us back. Parts sourcing is matched to your specific operator series, never pulled from a shelf that may not fit.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Enterprise
Here’s what we actually find when we pop a Ghost Controls cover in Enterprise. Each of these has a cause that traces back to something specific about this town’s heat, dust, or aging tract gates.
- Battery and solar underperformance in the summer heat. Above 105°F, battery capacity falls and the charge controller behaves differently, so a gate opens part-way or stalls mid-swing by late afternoon. We test the battery against actual solar output before we recommend replacing either.
- Photo-eye faults after monsoon dust. Dust-loaded eye lenses and UV-cracked sensor housings cause intermittent reversal or a gate that refuses to close. A five-minute clean fixes half of these; the other half need new eyes with matched lenses.
- Swing-arm and limit-switch misalignment. Builder-installed hinges and posts on 15 to 30-year-old tract gates sag, so the operator fights the gate and trips its own obstruction logic. Realigning the gate leaf first is often what makes the operator behave.
- Remote and keypad pairing after a battery or board swap. The receiver forgets its pairings when the board loses power long enough. We re-pair the existing remotes and keypads rather than selling you new hardware.
- Keypad and intercom wiring corrosion. Irrigation overspray and pool-area moisture are the culprits here, not rain. We re-seal connections so the next season of overspray doesn’t undo the fix.
Ghost Controls Service in Enterprise: What Local Conditions Mean for Your Equipment
Enterprise’s 89139 is master-planned HOA suburbia south of the 215, and that shapes Ghost Controls work here in a way it doesn’t in older Las Vegas neighborhoods with mixed fence lines. Almost every gate in Enterprise has to match a tract-wide architectural standard, so an operator swap or swing-arm replacement isn’t just a mechanical decision: it’s a matter of preserving the builder’s original gate style and finish so the HOA architectural review committee sign-off isn’t triggered. We’ve learned to photograph the existing gate profile and color-matching before we start, because a gate that works but no longer matches its neighbors can still earn you a compliance letter. In this town, the honest repair is the one that keeps the palette and the mechanism both right.
Ghost Controls Models & Products We Service in Enterprise
We service the full Ghost Controls line you’ll find behind Enterprise driveways and side yards: the AXO and ACU heavy-duty single swing operators in both solar and AC-powered kits, the TDS and TSS standard-duty single swing DIY kit operators, dual-gate configurations with two operators paired to the AXO-series boards, and slide-gate operator packages with their matching control boards and solar harnesses. We source Ghost Controls OEM batteries, boards, arms, and sensors matched to your specific operator series so the solar charge profile and limit logic stay correct, and we’ll use quality aftermarket keypads, remotes, and battery backups where they don’t compromise the board. We don’t claim a local parts stock; every part is ordered to the job. We also weld on site, so a hinge or post repair happens in your driveway, not at a shop across town.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Enterprise
Every job is quoted and agreed before we start, and the price on the estimate is the price on the invoice. Typical line items in the Enterprise area run roughly:
- Diagnostic and second-opinion visit: often waived with your repair
- Photo-eye cleaning and re-alignment: around $95 to $155
- Remote and keypad re-pairing: around $85 to $135
- Arm and limit-switch realignment: around $145 to $245
- Battery and charge-controller replacement: around $185 to $320
- Gate leaf and hinge realignment (no operator swap): around $195 to $350
What drives the number is whether the gate itself is sound. On a sagging 20-year-old tract gate, repairing the operator without fixing the leaf and hinges fails again, so we say so and quote the realignment first. Standing offers apply: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (844) 761-9351 for a free estimate.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Enterprise
Heat is usually the reason. In Enterprise, highs above 105°F reduce battery capacity and change how the charge controller delivers current, so a gate that opened fine at breakfast stalls mid-swing by late afternoon. We test the battery against actual solar output before recommending a replacement. Call (844) 761-9351 for a free estimate on the fix.
Often yes, if the new hardware changes the gate’s appearance or profile. In Enterprise’s planned communities, the smart move is to preserve the original builder gate style and finish so the architectural review committee sign-off isn’t triggered. We photograph and color-match before we start.
Dust-fouled photo-eyes are the usual suspect. Monsoon dust loads the eye lenses and the operator reads a false obstruction, so it reverses. Cleaning the eyes fixes many of these; UV-cracked housings need replacement. Call (844) 761-9351 and we’ll confirm before you spend anything.
Yes, almost always. A board swap usually clears the receiver’s pairings, but the existing remotes and keypads can be re-paired to the new board. We re-pair them rather than sell you replacements. Call (844) 761-9351 for a free estimate.
Yes, especially on solar-powered operators in this heat. A battery backup keeps the gate working through a summer afternoon drain and a brief power loss, and it’s a common add-on for Enterprise homeowners. Call (844) 761-9351 to talk through your setup.
Service Areas Near Enterprise
We cover Ghost Controls service throughout Enterprise and the surrounding south-valley communities. If you’re nearby, we also serve North Las Vegas, Sunrise Manor, Las Vegas, Winchester, and Whitney, and the neighboring town of Spring Valley to the west and Paradise to the north. If you’re in this Enterprise area, we’d be glad to help. See our Enterprise service area page for full coverage details.
Book Your Ghost Controls Service in Enterprise Today
If your Ghost Controls gate is stalling, reversing, or just acting up in the Enterprise heat, call (844) 761-9351 and a live person will pick up. We offer same-day availability for repairs across Enterprise, free estimates, and upfront pricing agreed before any work begins. From electric gate repair to battery backup and gate realignment, we handle it right.
Written by the team at Gatewood Fence & Gate North Las Vegas.