Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for North Las Vegas Homeowners
A gate that won’t close right is a security problem, a headache for the whole household, and something that gets worse the longer it’s left alone. A lot of the gates we see in North Las Vegas were installed by national outfits that came through once and won’t be back, or by someone who packed up before the job cured correctly. We repair what’s there instead of selling you a new gate you don’t need, and we weld right on site so your gate never leaves the driveway. Our technicians have up to 25 years of experience, we’re certified to service nine major gate brands, and someone answers the phone here around the clock, day or night. When a North Las Vegas gate comes off its track or a hinge post gives out, you can call us at (844) 761-9351 and get a straight answer fast.
What Our Gate Repair Service Includes
Electric Gate Repair
Electric gates run on motors, control boards, safety sensors, and low-voltage wiring, and any one of those can fail and leave you with a gate that won’t move. You’ll know it’s time when the gate stops midway, trips a breaker, or the motor hums without doing anything. We test the whole system in your driveway, trace the fault, and fix the actual cause instead of swapping a part that’s still good. If it’s a LiftMaster board or a Linear control module, we know where those units wear out in our heat.

Automatic Gate Repair
An automatic gate that opens on a schedule or a remote is only as reliable as its operator, and operators are the most common failure point on the property. When the gate opens partway, reverses for no reason, or runs when nobody asked it to, that’s usually the operator, the limit switches, or a sensor getting fooled by debris or sun angle. We service FAAC and BFT operators and the rest, then dial in the travel limits so the gate stops exactly where it should. Show us the gate closing on its own, as the old-timers say, and we’ll show you where it’s failing.

Hinge & Post Repair
Back to the point that matters most: a gate sags in the hinge post, not in the middle. The post is what holds everything up, and desert soil plus a heavy gate will eventually pull a hinge loose. You’ll see the drag at the bottom, the gate catching on concrete, or the whole leaf pulling away from its anchors. We dig in, weld the hinge back to solid steel where we can, reset or replace the post when it’s failing, and brace it so gravity gets outvoted. That’s the repair that actually lasts.

Gate Realignment
When a gate scrapes the ground or won’t line up with the latch, it’s out of plumb, and realignment is what puts it back on its marks. This is common after a big wind event or a minor bump, and it can also be the slow drift of a post that sat slightly off from day one. We measure the fence line and the gate travel, adjust the hinges and the posts, and set the catch so it drops in clean every time. Fix the panel without the post and you’ll fix it twice, which is exactly what we don’t do.
Lock Repair
A gate that won’t lock means it doesn’t guard anything, and a lock that sticks is a security problem dressed up as an inconvenience. We repair latches, key locks, magnetic locks, and the taller access-control locks that live on gates from DoorKing or similar makes. If your key, code, or fob won’t take, or the lock holds but the gate won’t latch behind it, we’ll diagnose the pair together since they work as one. We get your gate locking reliably so the whole point of a gate is still there.
Weld & Rust Repair
Metal gates crack at the corners, rust through the bottom rail, and fail at the welds that took the most stress, and in our climate that’s especially true of the lower half. Once rust gets into the tube, it eats from the inside out and you won’t see it until the gate is weak. We cut out the rotted section, patch with matching material, and weld on site with the gate still hanging, so you don’t lose it for a week. Then we treat the seam so it holds up to the summer heat and the occasional monsoon.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Brands We Service for Gate Repair
We’re certified to service nine major gate brands, and the ones we see most often in North Las Vegas are LiftMaster, FAAC, BFT, and Linear. With LiftMaster we mostly see control boards and safety photo-eyes go first in the heat, and we know exactly which connectors corrode on their operators. FAAC and BFT hydraulic arms take a beating in the desert and start to droop or bypass when the oil gets old, and we rebuild or replace the arm with the right match. On Linear units, it’s usually the travel limits or a sensor that’s reading dirt as an obstacle.
Every brand has its own weak spot, and knowing that saves you from paying for parts you didn’t need. We service all these systems and their accessories, so a call about a FAAC arm or a Linear control board gets a real answer instead of a shrug. Whether you have a LiftMaster, a BFT, or any other make we cover, we can help, and we’ll tell you honestly if the fix is a repair or a replacement before you spend a dime.
Signs You Need Gate Repair Right Now
- The gate sags and drags on the ground. That’s usually the hinge post failing, and every day you wait puts more strain on the welds and the operator arm. If you can hear the scrape, the problem has already been building for weeks.
- The operator runs but the gate won’t move. A motor that whines without opening usually means a stripped gear in the operator, a broken arm, or a safety sensor holding it shut. That’s a diagnostic question and the sooner we look, the less it costs.
- The gate moves on its own or stops partway. This is a control or limit-switch fault, and on an automatic gate it’s also a safety issue. A gate that can close unexpectedly is not one you want near a car, a kid, or a dog.
- The lock won’t take a key or a code. A gate that won’t lock isn’t a gate, it’s a barrier that swings open, and that’s a security problem worth fixing today. Magnetic locks and access-control units fail in predictable ways, and a quick repair usually closes the gap.
- Rust, cracks, or broken welds. Rust at the bottom of a gate tube eats from the inside, and a cracked weld at a hinge or corner can snap under load. On a heavy gate that’s a real hazard, so have it looked at before the gate comes down on its own.
Our Gate Repair Process – Step by Step
- 1
You call and talk to a live person. Not voicemail, not an answering service three states away. You get a real person on the phone who can hear what’s happening and give you a straight answer, and we’ll set a window we actually keep.
- 2
We come out and diagnose it in person. On site, we check the hinge post, the operator, the control wiring, the sensors, and the latch as one system, because a gate fails as a system. We use a multimeter on controls and a level on the posts so the diagnosis is based on readings, not guesswork.
- 3
We give you an upfront price before we touch anything. You get a written estimate with the parts, the labor, and the 90-Day Done Right Promise stamped on it. The price we quote is the price you pay, and there’s no surprise at the door.
- 4
We make the repair on site, including welding. Most of the time the gate stays in your driveway while we weld the hinge, reset the post, or swap the operator part. Whole jobs that other shops haul off are handled here, and you can watch if you want.
- 5
We test it with you and put the guarantee in writing. Before we leave you’ll run the gate, test every remote and sensor, and lock it with your own key. If anything isn’t right within 90 days, one call brings us back, no runaround.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in North Las Vegas?
Gate repair in North Las Vegas typically runs $150 to $450 for common repairs, and the written estimate you get is the number you pay. Here’s how the line items usually stack up for a residential job:
- Hinge or post reset: $180 to $350 depending on whether we can weld the existing hinge or need to reset the post.
- Gate realignment: $150 to $300 depending on how far out of plumb it has drifted and whether it involves the operator.
- Lock or latch repair: $100 to $250 depending on the lock type, from a simple key latch to a magnetic access-control lock.
- Weld and rust repair: $150 to $400 depending on the metal and the length of the section that needs repair.
- Electric or automatic gate repair: $200 to $500 plus any parts, since control boards and operator motors are the costly part.
What moves the price is the accessibility of the post, the condition of the wiring and operator, the metal type on the gate, and the parts involved. The way to avoid overpaying is to get it looked at early and to get a written, itemized estimate, which we provide free with no obligation and no trip charge inside the county. A second opinion on someone else’s written estimate is always free. We’ll also tack on the standing $40 off any repair over $200, 10% for seniors and veterans, and the price is agreed before any work starts.
Gate Repair Near North Las Vegas – Our Service Area
We repair gates in North Las Vegas and the communities around it. If you’re in Sunrise Manor, Whitney, or Winchester, we can get to you in the same window most days. Folks in Las Vegas, Paradise, Spring Valley, Summerlin, Henderson, Enterprise, Boulder City, and Moapa Town are on the route too. We keep the same response as we do in North Las Vegas, and yes, we’re on call around the clock for the ones that can’t wait. If you’re nearby, our Gate Repair in Sunrise Manor page covers the neighborhoods we serve there, and our home page will point you to everything else we do.
Serving North Las Vegas, NV – Our Local Coverage Area
We serve North Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Gate Repair in North Las Vegas
Gate repair is fixing the parts of a gate that make it fail, rather than replacing the whole gate or fence. It covers the hinges, post, operator, control wiring, sensors, latch, and the metalwork itself. We repair the gate in your driveway most of the time, including welding on site, and the goal is a gate that works correctly and lasts. For the full range of what we cover, see our Gate Repair in Las Vegas page, which uses the same process we run in North Las Vegas.
Most common repairs are finished in a single visit, usually one to three hours on site. Hinge resets, realignments, and latch repairs are the quick ones. Repairs that need an uncommon part, a control board, or an operator motor can run into a follow-up visit once the part is in, and we tell you that up front. If you want a better guess before we come out, call (844) 761-9351 and we’ll talk it through.
Typical repairs run $150 to $450, with electric and automatic gate repairs usually in the $200 to $500 range plus parts. The exact number depends on the part that failed, the gate metal, and access to the post. We quote the price and you agree to it before any work starts, so there’s no surprise at the door, and the estimate itself is free. Call (844) 761-9351 for an exact quote.
Yes, we’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. LiftMaster and FAAC come up most in North Las Vegas, and we know where each one tends to fail here. We work on FAAC and the other hydraulic arms as well as the newer LiftMaster control boards. Whatever the make, we can diagnose it and give you an honest answer on repair.
Yes. We answer the phone around the clock, and for the repairs that matter most, like a gate hanging open or one that won’t close, we make same-day windows whenever we can. North Las Vegas jobs usually fit the sooner end of the schedule. If it’s an urgent security issue, call (844) 761-9351 and tell us what’s happening.
Every repair we do carries the 90-Day Done Right Promise in writing. That means if it isn’t right within 90 days, we come back and make it right, one call, no runaround. The guarantee is on the estimate and on the final invoice, not buried in fine print. We stand behind the work and you’ll see it in writing before we leave.
Clear a path to the gate and the control box, and leave the gate unlocked if the key or code isn’t working. If you can, be there to show us the problem, since seeing it fail is worth ten minutes of description. Have any paperwork you have on the gate or operator, the brand, and the install date, and we’ll take it from there.
Schedule Your Gate Repair Service in North Las Vegas Today
If the gate in North Las Vegas is dragging, failing to close, or refusing to lock, the fix is one call away. You’ll reach a live person, get a free estimate, and get a straight quote before any work starts. Please consider calling us first so you don’t pay twice. Call (844) 761-9351 today.
Written by the team at Gatewood Fence & Gate North Las Vegas.