Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Henderson
If your gate motor is straining, reversing, or dead in the water, the fix usually comes down to a handful of things we’ve seen a hundred times in Henderson. We work on the heavy ornamental swing gates and long slide gates that run along block walls in Green Valley and Anthem, along with the older side-yard gates in the downtown neighborhoods off Water Street. Our technicians have up to 25 years of experience, and we come out with a repair-first mindset: check the post, the hinges, and the finish before anyone tries to sell you a new operator. Call (844) 761-9351 and a live person picks up, day or night.
Why Gatewood Fence & Gate North Las Vegas Is Henderson’s Preferred Gate Motor & Opener Company
Henderson owners tend to be careful about who touches their gates, and for good reason. A gate operator on a custom iron or Mediterranean-style gate is a precision piece of gear, and the wrong hands can turn a small alignment problem into a full replacement. That’s the gap we fill. Every job carries our 90-Day Done Right Promise in writing – if it’s not done right, one call brings us back, no runaround. We give you an upfront price and stick to it. And we carry the standing offers our Henderson customers actually use: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
We service nine major brands and are certified on all of them, so if your gate runs a LiftMaster, a FAAC, or a Linear operator, we know it before we pull into the driveway. A live person answers every call around the clock. You won’t get a voicemail or a chatbot, and you won’t get a quote that changes at the door.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Henderson
Whether your gate is a lightweight residential slide or a custom-fabricated ornamental swing on a deep footing, the work starts with the mechanics and ends with compliance. Here’s what we handle across Henderson’s ZIP codes – 89015, 89002, 89052, and 89009.
Motor Repair in Henderson
Most gate motor problems in Henderson aren’t the motor at all. A gate that reverses mid-cycle or strains against itself is usually fighting a hinge that’s binding or a post that’s settled, and replacing the operator won’t fix that. We diagnose the whole assembly first, then repair what actually failed – limit switches, control boards, safety photocells, or the operator itself. If the motor is genuinely gone, we’ll say so and show you why.

Slide Motor Service in Henderson
Slide gates on desert properties deal with dust, sun, and warping that binds the track. When a gate drags on its track, the motor hits a current spike and trips out – sometimes repeatedly, sometimes just on hot afternoons. We clear the track, check the rollers, inspect the rack and pinion, and reset the limits before touching the motor. That order matters.

Intercom Integration in Henderson
For estates in Anthem and the custom-home pockets, the intercom and camera entry is often what actually breaks the experience – the gate opens, but nobody can reach the house. We integrate intercom and video systems with the existing operator so the call, the release, and the camera all work on one panel. If the operator is older, we’ll tell you which integrations it will accept and which ones it won’t.

Motor Installation in Henderson
Replacing an operator on a heavy ornamental gate isn’t a swap job. It’s a measure-and-fit job. We confirm the gate’s actual weight, its swing or slide path, and whether the existing footing and hinges can carry a new operator. Installation is scheduled after the measure, with a written price before any work begins – not the same day, because the right operator for a custom gate doesn’t come out of a parts bin.
Trusted Brands We Service in Henderson
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t stock parts, so we won’t tell you a part is on a shelf when it isn’t. Instead, we diagnose first, quote the repair or the replacement with the brand and model in writing, and get the part to your gate. Most of the time the turnaround is faster than waiting for a shop two states away to decide whether they want the job.
Why Henderson Gate Motor Repairs Are Sometimes a Two-Part Job
Here’s what most gate motor pages leave out: in Henderson, a repair isn’t finished when the operator spins up clean. It’s finished when the gate also passes the HOA’s eye. In master-planned communities like Green Valley Ranch and Anthem, gate style and color are governed by the HOA’s approved scheme, and a gate that works perfectly can still fail inspection if its finish doesn’t match. So we carry paint and stain swatches on the truck and match the approved palette during the repair – not as a courtesy, as a standard part of the job.
The second part of the Henderson problem is the ground. The valley’s caliche-heavy soil holds water after a monsoon downpour, then shifts as it dries. On a heavy ornamental swing gate, that shifting throws the gate out of level, and the operator starts straining or reversing mid-cycle even though nothing is actually wrong with the motor. Which brings us to a typical scenario we see again and again in the older custom-home pockets around Henderson. A heavy ornamental swing gate starts dragging or reversing after monsoon season. A qualified local pro starts by checking the post footing and hinge alignment rather than the motor, then confirms the operator’s safety photocells and limit settings are intact before recommending a rack and pinion adjustment or a matched-finish repair that satisfies HOA color standards. Fix the post without the finish and you’ll fix it twice. Fix the finish without the alignment and it’ll fail again the first hot week.
Common Gate Motor & Opener Problems We See in Henderson Homes
Henderson’s climate and housing mix produce a short list of failures that come up over and over. Here’s what we run into most.
- Post settling in caliche soil. Monsoon rains swell the soil and then it dries unevenly, throwing a heavy ornamental swing gate out of level. The operator strains against the misalignment, skips limits, or reverses before fully closing.
- Sun-degraded finishes and warped panels. Henderson’s triple-digit summers dry and cup wooden gate panels and break down powder coat on iron. A slightly warped panel is enough to bind a slide gate track and burn out the motor.
- HOA color and style rejections. A gate can pass a mechanical inspection and still be flagged by the HOA because the repair finish doesn’t match the approved color. We match the palette during the repair so this doesn’t happen.
- Undersized operators on custom gates. Homes built in the 2000s-era master-planned south and east sides sometimes have operators sized for a stock gate, not the heavy ornamental gate that’s actually hanging there. The motor fails early because it was never right for the load.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Motor & Opener in Henderson, NV
We quote in writing before any work starts, and that price doesn’t change at the door. A typical motor repair in Henderson runs $180 to $420, depending on the operator brand and the parts involved. A slide motor service with track and limit reset generally runs $200 to $480. Intercom and camera integration on an existing operator runs $350 to $900, depending on the number of stations and whether new wiring is needed. A full motor installation on a heavy ornamental gate runs $950 to $2,200, with custom-fabricated brackets and matched-finish work at the top of that range. All of it is quoted first, and estimates are free. Call (844) 761-9351 and a live person will set up a time.
We Also Serve Cities Near Henderson
The work doesn’t stop at the Henderson line. We also help owners in Boulder City, Whitney, Paradise, and Enterprise with the same gate motor and opener service. If you’re just outside the Henderson ZIP codes and wondering whether we come out, the answer is usually yes – give us a call and we’ll tell you straight. You can also read more about our full Gate Motor & Opener work and about Gate Motor & Opener in Henderson on the city hub.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Henderson
The reversal is almost always a safety response, not a motor failure. The operator’s photocells or obstruction sensors are detecting something – frequently a gate panel that’s out of alignment after post settling, or a warped board that’s crossed the sensor beam. We check the alignment and sensors first before touching the motor. Call (844) 761-9351 for an exact quote; estimates are free.
In most cases, yes, the motor can be replaced on an existing slide gate operator without swapping the whole unit – but only after we confirm the track, rollers, rack and pinion, and limits are sound. If the gate itself is binding, a new motor will fail the same way the old one did. We’ll tell you which it is in writing before any work begins. Call (844) 761-9351 to schedule a look.
Yes, and it’s one of the more common jobs we run in Henderson’s master-planned communities. We carry paint and stain swatches on the truck and match the HOA-approved palette during the repair, so the gate passes inspection and passes it on the first look. The gate keeps working the same way it did – it just matches the community standard. Call (844) 761-9351 for a free estimate.
Your operator should have functioning safety photocells and, on some models, a sensing edge or loop detector that reverses the gate when it detects an obstruction. The model number on the operator will tell you what protection it was built for. We’ll verify what’s actually on your gate and pressure-test it – on a heavy ornamental gate, working safety devices matter more than on a stock residential slide. Call (844) 761-9351 and we’ll check it.
Caliche soil under the hinge post swells with monsoon rain and settles unevenly as it dries, which throws the gate out of level and makes it scrape or drag. The fix is usually a footing and hinge alignment correction before any motor adjustment. Fix the panel without the post and you’ll fix it twice. Call (844) 761-9351 for an exact quote on your gate.
Get Your Henderson Gate Running Right
Whether it’s a heavy ornamental swing gate in Anthem that won’t close, a slide gate binding on a track in Green Valley, or an intercom that stopped reaching the house, the first step is a call. A live person answers every time, day or night. We’ll set up a time, quote in writing before any work starts, and stand behind the job with the 90-Day Done Right Promise. Call (844) 761-9351 for a free estimate.
Written by the team at Gatewood Fence & Gate North Las Vegas.