Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Boulder City
If your gate motor has quit, you’re in the right place. We repair and install gate operators all over Boulder City, from the dam-era blocks off Nevada Way to the desert lots up on the caliche east of the McCullough Range. Boulder City gates take a beating. Heat, wind, dust, and ground that fights back. We know that, and we work accordingly. Call (844) 761-9351 and a live person picks up, day or night. Free estimates, and the price we quote is the price you pay before any work starts.
Why Gatewood Fence & Gate North Las Vegas Is Boulder City’s Preferred Gate Motor & Opener Company
Gatewood Fence & Gate has been locally owned and owner-operated since 2001, and the name is on the shop and on every invoice. Our technicians have up to 25 years of experience servicing the nine major gate brands, and we’re certified to work on LiftMaster, DoorKing, Elite, and the rest. We fix what other companies want to replace, welding on site so your gate stays in your driveway.
Boulder City homeowners call us because they’ve been burned by the outfit that quoted one price on the phone and charged another at the door. We answer every call with a live person around the clock, not voicemail, not a worker three states away. Our standing offers are simple and don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Every job carries the 90-Day Done Right Promise in writing.
We’re not passing through Boulder City. We’re down the road, and you can drive over and look us in the eye.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Boulder City
Motor Repair
Most of the operators we see in Boulder City aren’t dead, they’re stuck. Wind-driven sand packs the rollers, UV cracks the housings, and a stubborn arm seizes at the limit switch. Our Gate Motor & Opener team opens the panel, finds the real failure, and repairs rather than swaps. That saves you the cost of a whole new unit when the motor was never the problem.

Battery Backup
A spring windstorm knocks the power out, and suddenly your gate is a wall of iron. We install and service battery backup systems so your operator keeps cycling when the grid drops. For Boulder City’s high-wind and dust events, backup power is one of the simplest upgrades you can make, and it means you’re never stuck manually dragging the gate open.

Slide Motor
Slide gates dominate in Boulder City’s desert lots behind block walls and masonry fences. The track and rollers take a constant beating from wind-blown sand, and the operator strains against the grit. We clear and re-lube the track, level the hinge post and footing, and match a replacement motor to the gate’s weight and travel. A gate that trips overloads isn’t a bad motor; it’s a dirty track and a sagging post.

Motor Installation
Retrofitting a modern opener onto an old Boulder City gate is its own craft. A huge share of the homes here were built by the federal government in the 1930s, and the gates hang on hardware and masonry set by those original crews. Bolting a bracket to that old block takes engineering, not a clean new post. We measure, order, and schedule the work so it’s done right, not rushed.
Trusted Brands We Service in Boulder City
We’re certified to service nine major gate brands, including LiftMaster, DoorKing, Elite, Mighty Mule, FAAC, BFT, Linear, Viking, and Ghost Controls. We don’t keep a parts warehouse; what we do is diagnose fast and get the right part to your gate quickly, whether that’s a new control board for a DoorKing swing operator or a Mighty Mule arm that’s cracked from the sun. When a part is available, we order it, and we tell you straight how long it will take. No guessing games, no runaround.
Common Gate Motor & Opener Problems We See in Boulder City Homes
Boulder City is a hard place for gate hardware. Here’s what we run into again and again:
- Wind-driven sand jamming tracks and rollers. Dust storms push grit into the slide gate track, and the operator strains against the friction until it trips on overload. Clearing and re-lubing the track is often the whole fix.
- UV and heat cracking the operator. Boulder City summers run past 100°F with intense sun, and that dries out swing arms, latches, and limit switches. Housings crack, seals fail, and moving parts seize.
- Winter freeze and saturated ground heaving posts. A freeze and a wet season can lift old masonry and caliche-set hinge posts, throwing the gate out of plumb and stressing the motor every cycle.
- Loosened masonry mounts on dam-era gates. When the bracket a government crew hung decades ago comes loose, the gate sags and the operator fights a losing battle. Re-anchoring into that old block is a job for someone who knows the material.
The Boulder City Difference: Dam-Era Masonry and Hard Ground
Boulder City is one of the few places in Nevada where the federal government shaped everything. The Bureau of Reclamation built the town starting in 1931 to house Hoover Dam workers, and that origin shows up in every gate job. Much of the core is 1930s and ’40s federal housing: small stucco and masonry single-story homes on tight lots. The gates here often hang on hardware set by those original crews, so a modern opener retrofit means engineering a mount onto government-era block, not bolting to a clean new post. And the ground east of the McCullough Range is caliche-hardened, so a new post footing for a gate operator can turn a short job into an afternoon with a rock bar. Old-timers will tell you a post-hole that takes ten minutes in Vegas takes an entire afternoon here. We know that, and we plan for it.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Motor & Opener in Boulder City, NV
Here’s what the work actually runs in the Boulder City market, so you’re not guessing:
- Motor repair (track cleaning, limit switch, arm repair): $150 – $350
- Battery backup install: $250 – $550, depending on the operator and battery bank
- Slide motor replacement (parts and labor): $450 – $950
- New motor installation, including mount engineering: $800 – $1,800
What pushes a job toward the high end: a gate hung on old masonry that needs re-anchoring, a caliche footing that has to be dug, or a heavy gate that needs a bigger operator to carry the wind load. Free estimates are standard, the price is quoted and agreed before we start, and $40 off any repair over $200 applies. Seniors and veterans get a permanent 10% discount. Call (844) 761-9351 for an exact quote.
We Also Serve Cities Near Boulder City
If you’re just outside Boulder City, we’ve got you too. We serve Boulder City and the surrounding communities, including Henderson, Whitney, Paradise, and Enterprise. Same upfront pricing, same live person on the phone, same 90-Day Done Right Promise in writing. Call and we’ll tell you straight when we can be out.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Boulder City
Find the manual release on your operator (usually a keyed lever or a pull handle on the housing), turn off power at the breaker, and follow the manufacturer’s release procedure to disengage the arm or carriage by hand. On a slide gate, that lets you roll it along the track; on a swing gate, it frees the arm so you can push it open. Don’t force anything that won’t budge; that’s a sign the mechanism is jammed or the post has heaved. A trained tech should check it before you run the motor again. Call (844) 761-9351 and we’ll walk you through what to look for or come out.
Wind-blown sand packs into the track and rollers, and the operator trips on overload because it’s fighting friction. Clear the track, re-lube the rollers, and check that the hinge post and footing are still level. If the gate still trips, the operator may be undersized or the safety photocell may be dirty; a tech can sort it in one visit. Call (844) 761-9351 for a free estimate.
Yes, in most cases. We add backup batteries to LiftMaster, Linear, Elite, and other operators, sized to your gate’s travel and how long the power tends to stay out. It’s one of the best upgrades for Boulder City’s wind-season outages because it keeps the gate working when the grid drops. Call (844) 761-9351 to schedule an evaluation.
Usually not. A gate sags at the hinge post, not the motor, and a leaning post in caliche or a loosened masonry mount stresses the operator on every cycle. We check the post with a level and the footing before we touch the motor; fixing the panel without the post just means you fix it twice. Call (844) 761-9351 and we’ll diagnose the real cause, including a free second opinion on any written estimate.
Yes. Automatic gates must have entrapment protection under UL 325, which means photocells or loop detectors that stop the gate if something is in its path. In Boulder City, where sand and sun foul those sensors fast, they need regular cleaning and testing. We install and service safety edges and photocells, and we won’t leave a gate running without them. Call (844) 761-9351 for a free estimate.
Get Your Gate Moving Again
Don’t let a dead motor or a straining operator sit on your property. Call (844) 761-9351 for a free estimate and honest upfront pricing. A live person answers around the clock, the price is agreed before any work starts, and every job carries the 90-Day Done Right Promise in writing. We’re Gatewood Fence & Gate, and we’ll fix it right.
Written by the team at Gatewood Fence & Gate.