Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Las Vegas
If your driveway gate is dragging, your hinge post is leaning, or your community entry gate quit on a 110°F afternoon, we can help. We handle gate parts and on-site welding across Las Vegas, so the gate gets repaired in place instead of hauled off or swapped for parts it doesn’t need. We know the walled subdivisions and HOA entries on the northwest and west sides, because that’s where most of the work is. Call (844) 761-9351 and a live person picks up, day or night.
Why Gatewood Fence & Gate North Las Vegas Is Las Vegas’s Preferred Gate Parts & Welding Company
Las Vegas gate work runs on accountability. The name is on the shop, and the shop is down the road, which is the oldest form of trust there is. Every job we do in Las Vegas carries the 90-Day Done Right Promise in writing. If something we touched isn’t right, one call brings us back, no runaround and no fine print.
We’re locally owned and owner-operated, with a published address and license number anyone can look up. Our technicians bring up to 25 years of experience to the driveway, and they’re background-checked. We know Las Vegas gates at the detail level: why a shared entry gate in a northwest valley community locks residents out every August, and why a hinge post loosens in our soil before the panel ever bends.
Pricing is quoted and agreed before any work starts. Repair over $200 gets $40 off, there’s no trip charge inside the county, and seniors and veterans keep a permanent 10% discount. Expect a free second opinion if you already have a written estimate in hand.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Las Vegas
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. In Las Vegas, that often means a post loosened by caliche-heavy soil and seasons of heat cycling. We reset the post and footing where it needs it, weld worn hinge barrels back to solid, and confirm the gate swings clean before we pack up.

Gate Rollers
Wind-blown desert grit packs into rollers faster here than owners expect, and a binding roller wears the rack and pinion down with it. We clear, replace and align rollers on sliding gates and driveway units around the northwest valley. On any automatic gate we also check the operator, the safety photocells and the loop detector while we’re on site.

Latch & Lock
A latch that won’t catch is usually a symptom, not the problem: a slight sag, a worn striker, or hardware that’s loosened in the heat. We repair and replace latches, locks and strike plates on driveway and pedestrian gates across Las Vegas, and we coordinate with your management company when the gate belongs to a community association.

Post Replacement
Fix the panel without the post and you’ll fix it twice. When a hinge post is rotten, cracked at the footing, or racked by monsoon winds, we replace it rather than patch around it. That means setting the post correctly in Las Vegas’s soil, welding the frame back true, and rehanging the gate so it closes on its own the way it should.
Rail Repair and Custom Welding
Microburst winds during monsoon season rack and bend gate panels, and the bend then stresses an already-loosened post. We straighten and re-weld rails on site, by the driveway, so the gate stays where it lives. Where a gate style, height or finish needs to match what your HOA already approved, we work to that spec rather than talking you into something new.
Trusted Brands We Service in Las Vegas
We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT and Linear. Most parts for those systems can be sourced and ordered quickly, and we don’t stockpile parts on a shelf or pretend to. When an operator or control board needs replacement on a Las Vegas gate, we confirm the model, order what’s needed, and schedule the return visit with a written price before we touch it. If the existing part can be repaired, we repair it.
Common Gate Parts & Welding Problems We See in Las Vegas Homes
- Operator batteries and control boards baked by July heat. Summers here run 105 – 115°F, and that cooks the electronics on shared community entry gates. It’s the single busiest failure we handle in the northwest valley’s walled subdivisions, and it leaves residents locked in or out.
- Grit-packed rollers and hinges. Wind-blown caliche dust works into moving parts all year. Bind a roller and the rack and pinion wears prematurely, so the gate gets louder and slower before it quits.
- Monsoon-wind panel damage. Microbursts rack and bend swing and slider panels. The bent panel then stresses an already-loosened hinge post, which is why we check the post before the frame.
- HOA access-control failures. Keypads, call boxes and shared entry systems fail as hard as their control boards do. On community gates the fix usually means coordinating wiring and access instructions with the management company so residents can get in.
Pricing for Gate Parts & Welding in Las Vegas, NV
We quote before we start, and the number we agree to is the number on the invoice. A typical hinge replacement in Las Vegas runs $150 – $350 per hinge, depending on whether the post needs resetting. Gate roller replacement usually runs $120 – $300 for a set. Latch and lock repair is commonly $95 – $225. Post replacement, which is the bigger job and often the real fix, runs $400 – $900. Custom on-site welding is generally $95 – $150 per hour with a minimum shop call. Anything over $200 takes $40 off, and every estimate is free and in writing. Your ZIP, from 89165 out to 89111, doesn’t change the range; the job does.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Las Vegas
We work the whole valley, not just the city line. If you’re in Winchester, North Las Vegas, Sunrise Manor or Paradise, we handle your gate parts and welding the same way. You can read more about our Gate Parts & Welding service or about Gate Parts & Welding in Las Vegas and the surrounding communities.
Serving Las Vegas, NV – Our Local Coverage Area
We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Las Vegas
For like-for-like repairs, usually not. For anything that changes the gate’s style, height, color or finish, most Las Vegas HOAs require written architectural approval first, and we’re glad to work from the approval you have. If you’re in a walled master-planned community, check the CC&Rs before you commit to a look; the management company can confirm what’s already approved for your street. Call (844) 761-9351 and we’ll walk through what your job likely needs.
Because the hinge post carries the whole load, and in Las Vegas it’s set in soil that loosens and in sun that works the hardware. A sagging gate almost always starts at the post, footing and hinge barrels, not the gate body itself. We inspect the post first and fix what’s actually failing, rather than welding the panel and watching it sag again in a season.
In July and August, it’s typically a heat-cooked control board or a dead operator battery on the shared entry gate. Those electronics bake through 110°F summers faster than anything else on the gate, and that’s why the failure always seems to hit mid-summer. We diagnose the access-control wiring and the operator together, and on HOA gates we coordinate the fix with the management company so residents aren’t locked out. Call (844) 761-9351 for an exact quote; estimates are free.
Yes, any automatic gate should have working entrapment protection, and it’s a safety matter, not an option. On swing and sliding operators that means functioning safety photocells and, where the installation calls for it, edge sensors and a loop detector. Heat and dust degrade those components quietly, so we test them on every automatic gate we service in Las Vegas. If your gate moves and the safety devices don’t, that’s worth a call today.
The major brands, including LiftMaster, FAAC, BFT and Linear. We’re certified to service those and several others, so a driveway operator or a shared community access system is work we know. If a part can be repaired rather than replaced, we repair it. Call (844) 761-9351 for a free, written estimate before any work begins.
Here’s What a Las Vegas Gate Call Usually Looks Like
Most calls start with a swing gate that drags, binds, or won’t open all the way. The qualified local pro checks the hinge post and footing before touching the panel, because a post that has loosened in the soil is usually the real cause. From there the job is clearing and replacing grit-packed rollers, correcting the sag, and testing the operator, safety photocells and loop detector on any automatic gate. On HOA shared entry gates, the same visit often involves the keypad entry and call-box wiring, coordinated with the management company so residents can get in and out. Nothing gets rushed, and nobody touches the gate until the price is agreed.
Get Your Free Estimate in Las Vegas Today
Whether it’s your driveway gate or a community entry system, call (844) 761-9351 for a free estimate. A live person answers around the clock. We’ll tell you what’s wrong, quote it in writing, and stand behind the work with the 90-Day Done Right Promise.
Written by the team at Gatewood Fence & Gate North Las Vegas.