Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Henderson
Gatewood Fence & Gate North Las Vegas handles gate parts and welding for Henderson homeowners who want the gate fixed, not swapped out. We weld on site, match the hardware to what’s already on your property, and check the hinge post before we touch a single panel. A sagging ornamental gate around Green Valley Ranch or Anthem usually points to a settled post, not a failed gate, and that’s where we start. Call (844) 761-9351 and a live person answers, day or night.
Why Gatewood Fence & Gate North Las Vegas Is Henderson’s Preferred Gate Parts & Welding Company
Henderson homeowners have been burned by the outfit that quotes one number on the phone and another at the door. We work the other way. The price is quoted and agreed before any work starts, and the 90-Day Done Right Promise is stamped in writing on every job. Our technicians have up to 25 years of experience, and every one of them knows how Henderson’s split between HOA-governed communities and older custom-home pockets changes what a repair has to satisfy.
We know the difference between a gate that works and a gate that passes. In master-planned neighborhoods like Anthem and Green Valley Ranch, a rewelded iron gate can swing fine and still get rejected because the finish or profile no longer matches the association’s approved scheme. Fans of our work in Henderson keep calling back for exactly that reason: we handle the hardware and the color match in the same visit. No trip charge inside the county means the person who shows up is there to fix it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Henderson
Most gate calls in Henderson come down to the same handful of failures. Heavy ornamental swing gates and custom Mediterranean-style entries take the worst of it, and the fix is almost always on the hinge post or the weld tabs, not the panel. Here’s how our Gate Parts & Welding team approaches each one.
Custom Welding in Henderson
Ornamental iron and custom-welded gate tabs crack and rust under the desert’s triple-digit summer heat, which means a repair that holds has to be welded to a matched finish. We weld on site, then touch up with swatches so the color still fits the HOA-approved scheme in communities like Green Valley Ranch. A failed weld on a heavy gate is a safety issue, and it gets treated like one.

Hinge Replacement in Henderson
A gate sags in the hinge post, not in the middle. Before we replace any hinge, we check whether the post has settled or cracked at the footing after a monsoon downpour in caliche-heavy soil. Replacing hinges on a post that’s already out of plumb just buys a few months, and you’ll be fixing it twice.

Post Replacement in Henderson
When a hinge post has cracked at the footing, re-setting or replacing it is the only repair that lasts. Older custom-home pockets around downtown Henderson see this most: 1980s and 1990s stucco-and-tile subdivisions where the posts have taken thirty-plus summers. We re-set the post, re-weld the hinge tabs and rails, and rebalance the operator so a heavy gate runs quiet again.

Rail Repair in Henderson
Rail repair on a driveway or side-yard gate usually means re-welding the rails to the frame rather than replacing them. Newer Mediterranean-style gates in the south and east of Henderson often need hardware that matches their ornate designs, and we carry swatches to get the finish right the first time. A good rail weld holds for years if the post behind it is sound.
Trusted Brands We Service in Henderson
Henderson gates run on operators from LiftMaster, FAAC, BFT, and Linear as often as anything else, and matching parts to older units is part of the job. We don’t claim a stocked warehouse or parts on a truck; what we do is source the right hardware for your operator’s vintage and get it installed without a swap you didn’t ask for. If your operator has been straining against a misaligned gate, the repair usually starts at the gate, not the motor. We’re certified across nine major gate brands and can match parts for the common ones you’ll find on Henderson properties.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Henderson Homes
- Hinge post settling in caliche soil. Monsoon downpours shift the footing, and a heavy ornamental swing gate sags at the latch even though the panel itself is sound. We check the post footing first.
- Weld tabs cracking under summer heat. Intense sun and triple-digit heat work on ornamental iron year after year until a weld tab gives way. The repair has to hold a matched finish, not just a strong weld.
- Operators straining against a misaligned gate. Underground and slide gate operators trip limits or stall when the gate behind them is out of line or the rack and pinion is worn. The motor gets blamed when the gate is the problem.
- HOA finish mismatches. In Green Valley Ranch and Anthem, a gate can pass a function test and still be rejected because the paint or stain no longer matches the approved scheme. We bring swatches to the property to close that gap.
Pricing for Gate Parts & Welding in Henderson, NV
Honest numbers, not a range that hides the real cost. A typical hinge replacement in Henderson runs $150 – $350; post replacement runs $400 – $900 depending on how deep the footing goes into caliche; rail repair and rewelding runs $200 – $600; and custom welding on ornamental or Mediterranean-style gates runs $250 – $800. What moves the number is the gate’s weight, the finish match, and whether the operator needs rebalancing on the same visit. The price is quoted and agreed before any work starts. $40 off any repair over $200, no trip charge inside the county, free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. For an exact quote on your gate, call (844) 761-9351.
We Also Serve Cities Near Henderson
We handle Gate Parts & Welding in Henderson and the towns that surround it: Boulder City, Whitney, Paradise, and Enterprise. Same 90-Day Done Right Promise, same live person on the phone, same upfront price quoted before work starts. If your gate is in any of these, call and we’ll get it scheduled.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Henderson
Yes. In Henderson’s HOA-governed communities like Green Valley Ranch and Anthem, a gate that swings and latches correctly can still be rejected if the iron finish, paint color, or ornamental profile no longer matches the association’s approved scheme. That’s why our Henderson repairs include bringing paint and stain swatches to the property, so the fix satisfies the association as well as the hardware. Call (844) 761-9351 if you’ve had a repair bounce.
The hinge post has almost certainly settled or cracked at the footing. In caliche-heavy soil, a monsoon downpour can shift the post and let a heavy ornamental swing gate drop at the latch within weeks, even when the panel itself is still straight. The fix is re-setting or replacing the post first, then re-welding the hinge tabs and rails. Call us for a look before the sag turns into a bent panel.
Heavy gates carry more load through their weld tabs, and the desert heat dries and stresses ornamental iron in a way lighter gates never see. A matched-finish weld is required so the repair holds and the color still fits the HOA’s approved scheme. Custom gates that get a generic weld end up cracking again the next summer. Our technicians have up to 25 years of experience with exactly this kind of work; call (844) 761-9351.
Yes. Any automatic gate that moves on its own needs entrapment protection, usually a safety photocell, and it needs to be adjusted and tested after any repair. If the gate has been repaired, we confirm the photocell and adjust the rack and pinion or limit settings so the gate doesn’t strain the motor. The 90-Day Done Right Promise is stamped in writing on every job. Call us to schedule a check.
LiftMaster, FAAC, BFT, and Linear come up most on Henderson properties, and parts can generally be matched to the operator’s vintage without swapping the whole unit. We’re certified across nine major gate brands, and we don’t claim a stocked warehouse, so sourcing takes a day or two more than a shop with a shelf full of parts. If your operator is tripping limits, call (844) 761-9351 and we’ll confirm the brands and get the right hardware on order.
Call (844) 761-9351 for a free estimate on your gate parts and welding in Henderson. A live person answers every call, the price is quoted before any work starts, and the 90-Day Done Right Promise is on the job in writing.
Written by the team at Gatewood Fence & Gate.